Problems with Core CI engine block

Question

Sumedh Soman 2020-11-12

0
链接

此问题的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/646173-problems-with-core-ci-engine-block

评论： Sumedh Soman 2022-8-29

I am trying to make a model of a CI engine using the Torque Structure configuration. When I set engine RPM as a constant, say, 1000 RPM, the torque output of the engine comes out to be a negative value(-21 kNm), any idea where I might be going wrong?

0 个评论
显示 -2更早的评论隐藏 -2更早的评论

请先登录，再进行评论。

请先登录，再回答此问题。

Answer 1

Vincent Hu 2022-8-25

0
链接

此回答的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/646173-problems-with-core-ci-engine-block#answer_1033515

I think you need to have a load or command torque as second input to get the torque you want. if only 1000 rpm, no load or command torque, it may be no load, which will be under motoring model, so the -21kNm maybe your friction torque. but it seems it's a very big engine? I think -21Nm should be reasonable, you need to double check the friction torque table as well.

1 个评论
显示 -1更早的评论隐藏 -1更早的评论

Sumedh Soman 2022-8-29

Hello, Thanks for your reply. Actually I have specified a load value (50 Nm), and the block has the default configuration loaded. I have specified a constant engine coolant temperature. The same parameters are working perfectly with the simple engine lookup model, but it is not working with the torque structure model.

请先登录，再进行评论。