Change Individual Matrix Value

3 次查看（过去 30 天）
N/A
N/A 2020-11-30
回答： Jemima Pulipati 2020-12-16
I am trying to change a value in a matrix with each iteration of a loop. I want Tdank to take on a different value with each iteration. For instance, for iteration 1, I want xfoot, yfoot, zfoot, etc. to be the first number in their individual matrices on the first loop and to be the 2nd number in their individual matrices on the second loop, continued until the end. Tdank is basically a compilation of all 1st values, 2nd values, etc. THE MATRICES I'M TRYING TO CHANGE ARE THE LAST 3 (very bottom of page/code).
load gaitdata %Load Initial Data
load RHJC %Load Hip Joint Centers
fs=100;
t=[1/fs:1/fs:length(LASI)/100];
%FILTER DATA
LASI2=filter([1/4 1/4 1/4 1/4],1,LASI);
RANKLAT2=filter([1/4 1/4 1/4 1/4],1,RANKLAT);
RANKMED2=filter([1/4 1/4 1/4 1/4],1,RANKMED);
RASI2=filter([1/4 1/4 1/4 1/4],1,RASI);
RGRT2=filter([1/4 1/4 1/4 1/4],1,RGRT);
RHEE2=filter([1/4 1/4 1/4 1/4],1,RHEE);
RKNELAT2=filter([1/4 1/4 1/4 1/4],1,RKNELAT);
RKNEMED2=filter([1/4 1/4 1/4 1/4],1,RKNEMED);
RTHI2=filter([1/4 1/4 1/4 1/4],1,RTHI);
RTOE2=filter([1/4 1/4 1/4 1/4],1,RTOE);
SACR2=filter([1/4 1/4 1/4 1/4],1,SACR);
%>>>>>>>>>>END OF FILTRATION<<<<<<<<<<
for a=1:length(SACR2)
%ANKLEC(a,1)=[RANKLAT2(a,1)+RANKMED2(a,1)]/2; %KNEE joint X CENTER
%ANKLEC(a,2)=[RANKLAT2(a,2)+RANKMED2(a,2)]/2; %KNEE joint Y CENTER
%ANKLEC(a,3)=[RANKLAT2(a,3)+RANKMED2(a,3)]/2; %KNEE joint Z CENTER
ANKLEC(a,1)=RKNELAT2(a,1)+0.5*(RANKMED2(a,1)-RANKLAT2(a,1));
ANKLEC(a,2)=RKNELAT2(a,2)+0.5*(RANKMED2(a,2)-RANKLAT2(a,2));
ANKLEC(a,3)=RKNELAT2(a,3)+0.5*(RANKMED2(a,3)-RANKLAT2(a,3));
KNEEC(a,1)=[RKNELAT2(a,1)+RKNEMED2(a,1)]/2; %ANKLE joint X CENTER
KNEEC(a,2)=[RKNELAT2(a,1)+RKNEMED2(a,1)]/2; %Ankle joint Y CENTER
KNEEC(a,3)=[RKNELAT2(a,1)+RKNEMED2(a,1)]/2; %ANKLE joint Z CENTER
end
%VECTORIZE USING LOCAL COORDINATE SYSTEM
%MAGNITUDES<<<<<<<<<<<<<<<<<<<<<<<<
for b=1:length(RTOE2)
%>>>>>>>>>>>>>>CENTERS OF MASS<<<<<<<<<<<
COMfoot=RTOE2+0.5*(RHEE2-RTOE2);
COMleg=ANKLEC+0.567*(KNEEC-ANKLEC);
COMthigh=KNEEC+0.567*(RHJC-KNEEC);
%/////////////////////////////////////////
%>>>>>>>>>>MAGNITUDES<<<<<<<<<<<<
footzmag(b,1)=sqrt((ANKLEC(b,1)-COMfoot(b,1))^2+(ANKLEC(b,2)-COMfoot(b,2))^2+(ANKLEC(b,3)-COMfoot(b,3))^2);
footxmag(b,1)=sqrt((RANKLAT2(b,1)-RTOE2(b,1))^2+(RANKLAT2(b,2)-RTOE2(b,2))^2+(RANKLAT2(b,3)-RTOE2(b,3))^2);
legzmag(b,1)=sqrt((KNEEC(b,1)-COMleg(b,1))^2+(KNEEC(b,2)-COMleg(b,2))^2+(KNEEC(b,3)-COMleg(b,3))^2);
legxmag(b,1)=sqrt((RKNELAT2(b,1)-KNEEC(b,1))^2+(RKNELAT2(b,2)-KNEEC(b,2))^2+(RKNELAT2(b,3)-KNEEC(b,3))^2);
thighzmag(b,1)=sqrt((RHJC(b,1)-COMthigh(b,1))^2+(RHJC(b,2)-COMthigh(b,2))^2+(RHJC(b,3)-COMthigh(b,3))^2);
thighxmag(b,1)=sqrt((LASI(b,1)-RHJC(b,1))^2+(LASI(b,2)-RHJC(b,2))^2+(LASI(b,3)-RHJC(b,3))^2);
%//////////////////////////////////////////
%>>>>>>>>>>>>>>>>>>>>LOCAL COORDINATES<<<<<<<<<<<<<<<,
zfoot(b,1)=[ANKLEC(b,1)-COMfoot(b,1)]/(footzmag(b,1)); %FOOT LOCAL COORDINATES
zfoot(b,2)=[ANKLEC(b,2)-COMfoot(b,2)]/(footzmag(b,1));
zfoot(b,3)=[ANKLEC(b,3)-COMfoot(b,3)]/(footzmag(b,1));
xfootTEMP(b,1)=[RANKLAT2(b,1)-RTOE2(b,1)]/(footxmag(b,1));
xfootTEMP(b,2)=[RANKLAT2(b,2)-RTOE2(b,2)]/(footxmag(b,1));
xfootTEMP(b,3)=[RANKLAT2(b,3)-RTOE2(b,3)]/(footxmag(b,1));
yfoot=cross(zfoot,xfootTEMP);
xfoot=cross(yfoot,zfoot);
zleg(b,1)=[KNEEC(b,1)-COMleg(b,1)]/(legzmag(b,1)); %LEG LOCAL COORDINATES
zleg(b,2)=[KNEEC(b,2)-COMleg(b,2)]/(legzmag(b,1));
zleg(b,3)=[KNEEC(b,3)-COMleg(b,3)]/(legzmag(b,1));
xlegTEMP(b,1)=[RKNELAT2(b,1)-KNEEC(b,1)]/(legxmag(b,1));
xlegTEMP(b,2)=[RKNELAT2(b,2)-KNEEC(b,2)]/(legxmag(b,1));
xlegTEMP(b,3)=[RKNELAT2(b,3)-KNEEC(b,3)]/(legxmag(b,1));
yleg=cross(zleg,xlegTEMP);
xleg=cross(yleg,zleg);
zthigh(b,1)=[RHJC(b,1)-COMthigh(b,1)]/(thighzmag(b,1)); %THIGH LOCAL COORDinates
zthigh(b,2)=[RHJC(b,2)-COMthigh(b,2)]/(thighzmag(b,1));
zthigh(b,3)=[RHJC(b,3)-COMthigh(b,3)]/(thighzmag(b,1));
xthighTEMP(b,1)=[LASI2(b,1)-RHJC(b,1)]/(thighxmag(b,1));
xthighTEMP(b,2)=[LASI2(b,2)-RHJC(b,2)]/(thighxmag(b,1));
xthighTEMP(b,3)=[LASI2(b,3)-RHJC(b,3)]/(thighxmag(b,1));
ythigh=cross(zthigh,xthighTEMP);
xthigh=cross(ythigh,zthigh);
%//////////////////////////////////////////////////////////////
%Tpank()=[xleg(b,1)];%;yleg(b,1);zleg(b,1)];
%Tpank(b,2)=[xleg(b,2);yleg(b,2);zleg(b,2)];
%Tpank(b,3)=[xleg(b,3);yleg(b,3);zleg(b,3)];
Tdank=[xfoot(b,1),xfoot(b,2),xfoot(b,3);yfoot(b,1),yfoot(b,2),yfoot(b,3);zfoot(b,1),zfoot(b,2),zfoot(b,3)];
Tpkne=[xleg(b,1),xleg(b,2),xleg(b,3);yleg(b,1),yleg(b,2),yleg(b,3);zleg(b,1),zleg(b,2),zleg(b,3)];
Tdkne=[xthigh(b,1),xthigh(b,2),xthigh(b,3);ythigh(b,1),ythigh(b,2),ythigh(b,3);zthigh(b,1),zthigh(b,2),zthigh(b,3)];
end

请先登录，再回答此问题。

回答（1 个）

Jemima Pulipati
Jemima Pulipati 2020-12-16
Hello,
From my understanding, you want to collate all the corresponding values of the three matrices (xfoot, yfoot, zfoot) into a single matrix 'Tdank' such that 'Tdank' changes during every iteration of the loop.
You can use nested for loops in you use case. Here is an example
% assuming the three matrices of size 3X3
xfoot = [1 2 3; 4 5 6; 7 8 10];
yfoot = [11 12 13; 14 15 16; 17 18 19];
zfoot = [21 22 23; 24 25 26; 27 28 29];
% a nested for loop to iterate through every value in the matrices
% here r, c refer to the number of rows and columns of matrices
for r = 1:3
for c = 1:3
Tdank=[xfoot(r,c),yfoot(r,c),zfoot(r,c)]
end
end
The value of Tdank changes during every iteration. Since this is nested for loop there will be 9 iterations in total (since 9 values in each matrix).
In the first iteration, the value of Tdank will be (it picks up all the first values from all the three matrices)
Tdank =
1 11 21
In the second iteration, the value of Tdank will be (it picks up all the second values from all the three matrices)
Tdank =
2 12 22
and so on.

类别

在 Help Center 和 File Exchange 中查找有关 Programming 的更多信息

标签

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by