Model a temporal delay

3 次查看（过去 30 天）

Andrea 2013-3-28

0
链接

此问题的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/69037-model-a-temporal-delay

Hi,

I am a newer of Simulink and I would like know if the solution that I decide to adopt, for my problem, is corrected. Following I try to explain my problem and the adopted solution.

/----------------------------------/

Problem:

I have a square wave S1, if S1 has value 1 after T seconds the value of another square wave S2 must pass from 0 to 1 and stay at 1 until S1 = 1. If in the interval [0, T] the value of S1 passes from 1 to 0 I must stop the counting of the time.

/----------------------------------/

My Solution:

I used a "Detector" block with the "Reset" input actived. "Output Type" is setted to "Delayed Fixed Duration" "Time Steps for Delay" is setted to T

Detector block has in input the value of S1 and the negated value on the Reset input.

/----------------------------------/

Question:

1. The problem is modelled correctly? 2. The time T is in seconds but I can have a time in decimal second (e.g. T = 0.4). The model satisfies this requirement?