Why is the current from the wind farm not uniform when using multiple wind turbines.

Question

Joseph James 2020-12-29

0
链接

此问题的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/704843-why-is-the-current-from-the-wind-farm-not-uniform-when-using-multiple-wind-turbines

评论： Juan Sagarduy 2021-1-6

Good Day, I have been using the type 4 wind farm from the example " Wind Farm - Synchronous Genenerator and Full Scale Converter(Type 4) Detailed Model" but when I use multiple wind turbines I find the output is unstable and I am not sure what could be causing this.

I have included screen shots below.

Figure1 showing the circuit and parramiters used

figure2 showing the results when using 1 turbine

figure3 sowing the circuit and paramiters using 33 wind tirbines

figure 4 showing the results of using 33 wind turbines

figure5 showing zoomed version of what takes place in figure4

Figure 5 showing a zoomed version of the results using 33 wind turbines

0 个评论
显示 -2更早的评论隐藏 -2更早的评论

请先登录，再进行评论。

请先登录，再回答此问题。

Answer 1

Juan Sagarduy 2021-1-3

0
链接

此回答的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/704843-why-is-the-current-from-the-wind-farm-not-uniform-when-using-multiple-wind-turbines#answer_590048

Hi Joseph The individual turbines might get wind speed that is not equal but follow a given distribution with a mean value of 30m/s. The results of currents shown reflect this reality. Regards Juan

2 个评论
显示无隐藏无

Joseph James 2021-1-5

Thank you, I will keep that in mind. Do you have any sugestions that may help me to reduce the fluctuations.

Juan Sagarduy 2021-1-6

Hi there, I have not looked into the example in detail. But maybe you can try to add more load (power consumers) into the grid, see if this damps current fluctuations. Br Juan

请先登录，再进行评论。