Errors in Battery simulator

2011 5 11
3 个回答
8 次查看（30 天）

0 个投票

I am trying to create this circuit as an example of "ssc_battery_management"... My circuit is this: http://img856.imageshack.us/img856/9189/batrj.png
But i have had some difficulties, as the erros like: "Error setting parameter 'Main branch time constant, Tau1>0': Expected a single string or a cell array of strings." "Error setting parameter 'Resistance, R10': '0' is not a valid unit."
Someone can help me?

4 个评论
显示 2更早的评论 隐藏 2更早的评论

Arnaud Miege
Arnaud Miege 2011-5-11
Can you upload your model to a filesharing site?
Nuno
Nuno 2011-5-11
Here: http://www.4shared.com/file/N3H1H6LF/Battery.html
Arnaud Miege
Arnaud Miege 2011-5-11
You forgot to include the Simscape library files used to model the battery cell. I assume you must have a directory called +LeadAcidBattery with the source files for the R0, R1, R2, etc... Right now, the model won't run because it can't find those files. Can you upload those as well?
Nuno
Nuno 2011-5-11
Ok... Files added: http://www.4shared.com/file/SydriTCj/Battery.html
Thanks!

请先登录，再进行评论。

请先登录，再回答此问题。

回答（3 个）

Arnaud Miege
Arnaud Miege 2011-5-11

0 个投票

I can't run the model Celula.mdl, I get an error message similar to:
Failed to find 'Main Branch Capacitance, C1/Slave_input.R1' in library 'LeadAcidBattery_lib' referenced by 'Celula/Condensador C1/Slave_input.R1'
I am not sure what you did to break it, but what you need to do is generate the LeadAcidBattery_lib by running ssc_build LeadAcidBattery and then use the blocks from the generated library file into the model to replace the existing ones.
I can't run the other models either because I'm missing the file Battery_Management_Lib.mdl.
Arnaud

11 个评论
显示 9更早的评论 隐藏 9更早的评论

Nuno
Nuno 2011-5-11
In this new file i add library: http://www.4shared.com/file/R2XIWerd/Battery_new.html
How i generate the LeadAcidBattery_lib by running ssc_build LeadAcidBattery and then use the blocks from the generated library file into the model to replace the existing ones?
Arnaud Miege
Arnaud Miege 2011-5-11
You need to read the documentation about the Simscape language, in particular "Using Simscape Files in Block Diagrams":
http://www.mathworks.com/help/releases/R2011a/toolbox/physmod/simscape/lang/brnot06-1.html
Nuno
Nuno 2011-5-11
If i understand, you said for me to create new blocks built by me? A new block for R0, R1 , .... ?
What is the name of block that i use to create this blocks?
Arnaud Miege
Arnaud Miege 2011-5-12
You already have the source code written in the +LeadAcidBattery directory. Go to the parent directory and run the command 'ssc_build LeadAcidBattery' (without the single quotes). This will generate the Simulink library LeadAcidBattery_lib.mdl. Use the blocks from this library to replace the ones you have in your model Celula.mdl, which don't work.
Arnaud Miege
Arnaud Miege 2011-5-12
Also, I have tried the other models, ssc_battery_management.mdl and ssc_sf_battery_management.mdl and they run just fine.
Nuno
Nuno 2011-5-12
But when i write this in parent directory appear:
"Generating 'LeadAcidBattery_lib.mdl' in the current directory 'C:\Program Files\MATLAB\R2009b\toolbox\physmod\simscape\simscapedemos' ...
??? Failed to generate 'LeadAcidBattery_lib'
Caused by:
Error using ==> save_system at 38
Error saving "C:\Program
Files\MATLAB\R2009b\toolbox\physmod\simscape\simscapedemos\LeadAcidBattery_lib.mdl":
Permission denied
Cannot overwrite read-only files or write to read-only storage."
Arnaud Miege
Arnaud Miege 2011-5-12
You didn't say you were doing this in the installation directory of MATLAB, where you don't have write permission. The library LeadAcidBattery_lib.mdl should alreayd exist in the parent directory. Just drag the blocks from the library and replace the blocks in your model Celula.mdl.
Nuno
Nuno 2011-5-12
but I can not find LeadAcidBattery_lib.mdl ...
Nuno
Nuno 2011-5-12
I have found... I will try to create my model... Thanks!
Nuno
Nuno 2011-5-12
Dont´t exist a Thermal Model in library?
Arnaud Miege
Arnaud Miege 2011-5-12
If you look at ssc_lead_acid_battery, you'll see that in the cell model, there is a thermal model, constructed with the blocks from the Simscape foundation library.

请先登录，再进行评论。

Nuno
Nuno 2011-5-12

0 个投票

Arnaud i have implemented the circuit but now it appears this error: "Unable to compile the physical network."
I already introduce the solver configuration. Waht is the error?
http://img233.imageshack.us/img233/2604/batterym.png

7 个评论
显示 5更早的评论 隐藏 5更早的评论

Arnaud Miege
Arnaud Miege 2011-5-13
What other error messages are you getting?
Nuno
Nuno 2011-5-13
Now appear the next error:
Nonlinear solver: Linear Algebra error. Failed to solve using iteration matrix.
Initial conditions solve failed to converge.
Dependency found among topology equations. Check for missing reference node.
Problems possible for transient initialization, as well as stepsize control for transient solve, due to equations of one or more components:
ModeloBateria/D Voltage Source
ModeloBateria/Main Branch Capacitance, C1
Arnaud Miege
Arnaud Miege 2011-5-13
You need an electrical reference block (from Simscape -> Foundation Library -> Electrical -> Electrical Elements). Similarly, if you use thermal blocks, you need a thermal reference block. This is documented:
http://www.mathworks.com/help/releases/R2011a/toolbox/physmod/simscape/ug/bq22y4u.html
Nuno
Nuno 2011-5-13
But i already used the DC Voltage Source from Electrical Elements...
Arnaud Miege
Arnaud Miege 2011-5-13
Yews, but have you got an electrical (and thermal) reference block in your network. Again, if you read the documentation page I mention, each domain in a network needs at least one reference block.
Nuno
Nuno 2011-5-17
I already resolve the problem... Now i create the subsystem and I added other components, but appear the same error:
Unable to compile the physical network.
I don´t understand why?
Arnaud Miege
Arnaud Miege 2011-5-17
Again, it's difficult to comment without seeing the model. Make sure that you follow the rules in the Simscape documentation for connecting components (help browser -> Simscape -> user's guide -> Modeling physical systems) and read through the documentation to make sure you understand how the software works and how to use it properly.
I would also strongly recommend the following training course:
http://www.mathworks.co.uk/services/training/courses/SLPM-S_1.html
For these types of problems, you should also contact technical support:
http://www.mathworks.co.uk/support/service_requests/contact_support.do

请先登录，再进行评论。

Nuno
Nuno 2011-5-18

0 个投票

You know if this warnigs afects the model?
Warning: The solver chosen is not recommended if the model is stiff, which is typical for models containing Simscape components. These solvers are typically preferred for Simscape models: ode23t, ode15s or ode14x (fixed-step). To disable this diagnostic, change the explicit solver diagnostic setting on the Simscape node of Configuration Parameters.
Warning: Using a default value of 0.2 for maximum step size. The simulation step size will be equal to or less than this value. You can disable this diagnostic by setting
'Automatic solver parameter selection' diagnostic to 'none' in the Diagnostics page of the configuration parameters dialog
Warning: Problems possible for transient initialization, as well as stepsize control for transient solve, due to equations of one or more components:
'ModeloBateria_testes/Subsystem1/DC Voltage Source'
'ModeloBateria_testes/Subsystem1/Electrical Reference'
'ModeloBateria_testes/Subsystem1/Main Branch Capacitance, C1'

1 个评论
显示 -1更早的评论 隐藏 -1更早的评论

Arnaud Miege
Arnaud Miege 2011-5-18
Again, you should really read the documentation, in particular "Setting Up Solvers for Physical Models" (http://www.mathworks.com/help/releases/R2011a/toolbox/physmod/simscape/ug/brsbz56.html) and "Customizing Solvers for Physical Models" (http://www.mathworks.com/help/releases/R2011a/toolbox/physmod/simscape/ug/bsigllk.html).

请先登录，再进行评论。

社区

更多回答在  Power Electronics Control

类别

在 帮助中心 和 File Exchange 中查找有关 Choose and Parameterize Blocks 的更多信息

产品

标签

提问:

Nuno
Nuno
2011-5-11

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by