GPU Computing

2 次查看(过去 30 天)
Jeremy
Jeremy 2011-2-2
I just tried running the following code:
N = 6;
M = magic(N);
G = gpuArray(M);
??? Error using ==> gpuArray at 28
An error occurred during: setting up the CUDA device. The CUDA error was: (Unknown code: 10100).
And I got the above error and am not sure why.
I'm running Mac OSX 10.6.6 on a Macbook Pro, Matlab 2010_b, an NVIDIA gpu ( Chipset Model: NVIDIA GeForce GT 330M Type: GPU Bus: PCIe PCIe Lane Width: x16 VRAM (Total): 512 MB )
and I just downloaded CUDA Driver Version: 3.2.17 and installed it.
Any suggestions?

采纳的回答

Edric Ellis
Edric Ellis 2011-2-3
Unfortunately, that GPU is compute capability 1.2, and Parallel Computing Toolbox requires GPUs with compute capability 1.3 and above. (I'm not sure quite why you're getting such a cryptic error message though). There's a post over on the newsgroup explaining why 1.3 is required:

更多回答(4 个)

Jeremy
Jeremy 2011-2-4
How do I find the compute power of my (and other) GPU(s)? I tried searching online to no avail and I wasn't sure where to look in my hardware specs.
  5 个评论
Walter Roberson
Walter Roberson 2011-2-20
Thanks, Mark. I see that the Quadro 4800 is also available in the Apple store. Neither are configurable in the configure-your-own system (at least not for Canada), so it appears you have to buy the ATI and then add the NVIDIA as a separate purchase.
The ads and press releases from other years show the Quadro 4500 and 5400 as previously having been available for the G5 and Mac Pro as build-to-order options.
Mark Shore
Mark Shore 2011-2-21
I just noticed Jeremy had a question there. You can find the compute capabilities of different GPUs here:
http://www.nvidia.com/object/cuda_gpus.html

请先登录,再进行评论。


Denis Zhegalin
Denis Zhegalin 2011-2-17
Hello, I've got the same error.
??? Error using ==> feval An error occurred during: setting up the CUDA device. The CUDA error was: (Unknown code: 10100)
I have two teslas c2050 + quadro for OS purposes. What to test ?
One remark, I use remote desktop access.
  1 个评论
Petter
Petter 2011-2-20
You cannot use the GPU via remote desktop access.

请先登录,再进行评论。


Najeeb Ahmad
Najeeb Ahmad 2011-3-3
I have TESLA C1060 (as compute only non-graphic device) and getting same error in MATLAB. What should I do???
Note: Using TELSA 263.06 WHQL driver (has TCC capability but I didn't find nvidia-smi.exe to exclusively switch it into TCC mode).
  1 个评论
Jason Ross
Jason Ross 2011-3-3
Try the 263 developer drivers from
http://developer.nvidia.com/object/cuda_3_2_downloads.html
This is what we downloaded and it's definitely there.

请先登录,再进行评论。


Najeeb Ahmad
Najeeb Ahmad 2011-3-8
Thanks for your reply!
I finally found that Tesla TCC driver doesn't work with Windows 7 32-bit. Now I have installed Windows 7 64-bit and Tesla C1060 TCC driver. It is working without a problem.

类别

Help CenterFile Exchange 中查找有关 Get Started with GPU Coder 的更多信息

标签

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by