Photovoltaic Thermal (PV/T) Hybrid Solar Panel

Question

Muhammad Yousaf 2021-2-21

0
链接

此问题的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/751744-photovoltaic-thermal-pv-t-hybrid-solar-panel

回答： Joel Van Sickel 2024-7-8，13:12

In the mentioned model of the H/PVT system in R2020b, can anyone help me that how the pump controls the flow of water?

1 个评论
显示 -1更早的评论隐藏 -1更早的评论

Umar 2024-6-25，17:59

Hi MY, In the H/PVT system, the pump plays a crucial role in regulating the flow of water. The pump controls the flow by increasing the pressure within the system, which in turn forces the water to move through the pipes at a desired rate. This is achieved by adjusting the speed or power of the pump, which directly impacts the pressure and flow rate of the water. To provide a more detailed explanation, let's consider an example: When the pump's speed is increased, it generates higher pressure within the system, causing more water to be pushed through the pipes. Conversely, reducing the pump's speed decreases pressure and subsequently slows down the flow of water. Furthermore, in R2020b, specific control algorithms may be utilized to optimize pump performance and maintain desired flow rates. These algorithms can monitor various parameters such as system pressure, temperature, and demand to adjust pump settings accordingly. It's essential to understand that proper pump control is essential for efficient operation of the H/PVT system, ensuring optimal performance and energy efficiency. By effectively managing the pump's operation, users can maintain consistent water flow rates and meet specific requirements for their application.

请先登录，再进行评论。

请先登录，再回答此问题。

Answer 1

Joel Van Sickel 2024-7-8，13:12

0
链接

此回答的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/751744-photovoltaic-thermal-pv-t-hybrid-solar-panel#answer_1482786

The pump is modelled behaviorally as a controlled mass flow source with an open loop repeating sequence definited by the equation: pumps.mdot_int*[0, 0, 1, 1, 0, 0]. So the pump is on for 1/3 of the time at a period defined by this vector of seconds: [0, 3600*6, 3600*6+0.1, 3600*22, 3600*22+0.1, 3600*24].

It is a very simply control scheme with no feedback. The behavioral model means that the exact flow rate is achieved without an actual control loop. In a real system, you'd likely implement controls on the pump to achieve a similar result.