Phased array tool box for Full Matrix Capture FMC

2013 6 13
1 个回答
回答已采纳
12 次查看（30 天）

0 个投票

Hi, I was wondering about the capability of Phased Array Tool box for acquireing the data in FMC format. In FMC data acqusition method, an element shots while the other elements are lisening and this procedure is repeated untill all elements are shoted. The out put will be a huge matrix (e.g., n*n for an array of n elements).
Any experince with this method?
-Mohsen

请先登录，再回答此问题。

 采纳的回答

Honglei Chen
Honglei Chen 2013-6-13

0 个投票

Hi Mohsen,
Could you be more specific on this?
If you are asking whether the Phased Array System Toolbox is capable of simulating such a process, then the answer is yes. You can certainly fire successively on the transmitter side by zeroing out other elements via weights at the time of transmission and then receive using the full array. Note that at this point the toolbox assumes plane wave in the simulation.
If you are asking whether the can acquire such data, as long as it can be imported into MATLAB, Phased Array System Toolbox should be able to work with it.
HTH

2 个评论
显示 无 隐藏 无

Mohsen
Mohsen 2013-6-17
Hi Honglei,
Thank you for the quick answer. There is two things here that I would like to know about the PA Toolbox:
1- Data acqusition: directly link the PA toolbox to hardware (which is the PA elements) and get data in the desired way, FMC, shot with one element and recieve with all. As I understand from your answer, this process is not possible with PA system toolbox please correct me!) , and
2- Data post-processing: process the captured data, which is a huge matrix (n*n, n is the number of elements), in order to get an image out of it, e.g., an image of flaws in welds.
Do you think that the simulation capability of the PA system toolbox is suitable of simulating the defects/flaws in steel pipes, which are considered as an elestic environment?
Regards,
Mohsen
Honglei Chen
Honglei Chen 2013-6-17
Hi Mohsen,
If you want to connect directly to the hardware, there is a Data Acquisition Toolbox which you can use to get data into MATLAB. But I don't have a lot of experience with that so I can't offer any useful advice there.
I personally haven't worked on any nondestructive testing project so I don't exactly what needs to be modeled in such a case. Do you have a overview reference I can read about? I'm definitely interested.
From your description, I do think you may need to develop a model representing the steel pipe (you may have one already). The only other thing I can think of that may get into the way is that most simulation in the toolbox assumes far field propagation, or plane wave to be more specific. I would be interested to know if it doesn't sever your purpose and if so, what kind of model you would like to use.
Thanks.

请先登录，再进行评论。

更多回答（0 个）

类别

在 帮助中心 和 File Exchange 中查找有关 Transmitters and Receivers 的更多信息

产品

标签

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by