App designer - problem with thresholding image

Question

0 个投票

ManualPointCount.mlapp

Hi folks,

I have the app attached, in which I am encountering two issues. Firstly, when trying to threshold an image and displaying the thresholded image, it would appear my function calls aren't working as the image displayed is not thresholded. (ResinThreshold function works in live editor, but not when called in app designer). The thresholding function is below.

Thanks

function ResinThreshold(app)
   imgGrey = rgb2gray(app.img);
   [counts, ~] = imhist(imgGrey, 255);
   T = otsuthresh(counts);
   BW = imbinarize(imgGrey, T);
   BW = bwareaopen(BW, 3000);
   BW = imfill(BW, 'holes');
   BW = bwperim(BW);
   BW = imdilate(BW, ones(5));
   BW = imerode(BW, ones(3));
   BW = imfill(BW, 'holes');
   app.img = app.img.*repmat(uint8(BW),[1 1 3]); 
end 

2 个评论
显示无隐藏无

DGM 2021-4-11

I don't see any attached files.

Teshan Rezel 2021-4-11

hi @DGM, apologies! I thought I'd attached it...I've ammended the error!

请先登录，再进行评论。

请先登录，再回答此问题。

Follow Question

Answer 1

Image Analyst 2021-4-11

在 MATLAB Online 中打开

1 个投票

You need to display the output image

imshow(app.img);

5 个评论
显示 3更早的评论隐藏 3更早的评论

Teshan Rezel 2021-4-11

在 MATLAB Online 中打开

hi @Image Analyst, this is done in a seperate function call as follows:

function DisplayCrosshairs(app)
    I = imshow(app.currentImage, "Parent", app.Image); 
    app.Image.XLim = [0 I.XData(2)];
    app.Image.YLim = [0 I.YData(2)];
    
    app.Width = app.Image.XLim;
    app.Height = app.Image.YLim; 
    quarterHeight = range(app.Height)*0.125;
    halfHeight = range(app.Height)*0.5;
    threeQuarterHeight = range(app.Height)*0.875;
    quarterWidth = range(app.Width)*0.125;
    halfWidth = range(app.Width)*0.5;
    threeQuarterWidth = range(app.Width)*0.875;
    
    app.positionVector = {quarterWidth quarterHeight;halfWidth quarterHeight;threeQuarterWidth quarterHeight;quarterWidth halfHeight;halfWidth halfHeight;threeQuarterWidth halfHeight;quarterWidth threeQuarterHeight;halfWidth threeQuarterHeight;threeQuarterWidth threeQuarterHeight};
    app.checkMatrix = [app.TopLeft.Value app.TopMiddle.Value app.TopRight.Value app.CentreLeft.Value app.CentreMiddle.Value app.CentreRight.Value app.BottomLeft.Value app.BottomMiddle.Value app.BottomRight.Value];
    app.numSamplesPerImage = sum(app.checkMatrix, 1:9);   
    
    count = 0;
    
    for i = 1 : 9
        if app.checkMatrix(i) == 1
           ROI(app, app.positionVector{i,:});
           count = count + 1;
        end
    end
    
    if count == 0
       msgbox('Please select a quadrant for the crosshair to be displayed in');
    end
end
function DisplayImage(app)
    app.currentImage = fullfile(app.imageFolder(app.imageNumber).folder, app.imageFolder(app.imageNumber).name);
    app.Image.Position = [0 0 app.UIFigure.Position(3:4)];
    app.img = imread(app.currentImage);
    
    if app.ThresholdResin.Value == 1
       ResinThreshold(app); 
    end
        
    DisplayCrosshairs(app); 
    DisplayImageNumbers(app);
end

Image Analyst 2021-4-11

编辑：Image Analyst 2021-4-11

I ran it but didn't know what to do. There are no instructions. You should do what I do. Have a listbox listing all the images, then a series of controls (checkboxes, pushbuttons, etc.) that say "Step 1 : select an image", "Step 2 : Select any options", "Step 3 : Mark Points", "Step 4 : Analyze selected ponts" or whatever. That will essentially guide the user through the various steps without a user manual or training. Otherwise, attach the software manual for it (though I'm not sure I'll read it if it's too lengthy).

Teshan Rezel 2021-4-11

hi @Image Analyst, so the app should prompt you to select a folder with images in it on startup. once selected, pushing any of the buttons on the left of the table will move increment the relevant tally and display the next image in sequence.

I haven't listed any instructions as this is a very specific app designed for use by a very few people, and its based entirely on an existing "manual" methodology. Typically, they will go through hundreds of images on the app and tally them up, so it's not feasible to implement a listbox for images.

请先登录，再进行评论。

App designer - problem with thresholding image

2 个评论
显示无隐藏无

采纳的回答

5 个评论
显示 3更早的评论隐藏 3更早的评论

更多回答（0 个）

类别

产品

版本

标签

Community Treasure Hunt

App designer - problem with thresholding image

2 个评论 显示 无 隐藏 无

采纳的回答

5 个评论 显示 3更早的评论 隐藏 3更早的评论

更多回答（0 个）

类别

产品

版本

标签

另请参阅

Community Treasure Hunt

2 个评论
显示无隐藏无

5 个评论
显示 3更早的评论隐藏 3更早的评论