how to read a .txt file in matlab ?
显示 更早的评论
i want to read a file name is imData.txt which has 9600 arbitrary float numbers. and store in array of size 80*120 after read i want show image of that array??
6 个评论
Walter Roberson
2013-7-5
What is the format of the data in the file? How many values are on each line of the file ?
preet
2013-7-5
preet
2013-7-5
Walter Roberson
2013-7-5
Is there exactly one float value per row? Are there exactly 80 float value per row? Exactly 120? Is everything in one large column?
Is the second value in the file to become matrix location (2,1) or matrix location (1,2) ?
Are the columns delimited by spaces? By tabs? Is there a fixed width for each column and the columns can "run together" because of that?
What are the minimum and maximum values in the file?
preet
2013-7-6
preet
2013-7-6
采纳的回答
Walter Roberson
2013-7-6
For data in that format, load() should work, as would textscan(). You would not need to reshape() the data after either of those.
image() and imagesc() do not convert to uint8. However, when image() is passed floating point data (instead of uint8 or uint16) then image will expect the data to be in the range of 0 to 1, whereas imagesc() would rescale the floating point values so that the minimum mapped to 0 and the maximum mapped to 1.
What you should do about the fact your data ranges from 0 to 619 depends on your purposes. Are you okay with the loss of resolution if you rescale to 0 to 255? If so then
scaleddata = uint8(YourData ./ max(YourData(:)) .* 255);
Or you could leave the data in floating point format if you do not specifically need it to be uint8()
scaleddata = YourData ./ max(YourData(:);
The above assumes that for each file, the maximum value of the file should be treated as being full brightness. If there is some other value that should be treated as maximum brightness (e.g., 640) then use that value in place of max(YourData(:))
更多回答（2 个）
Sivakumaran Chandrasekaran
2013-7-4
0 个投票
use textread command
Hugo
2013-7-6
0 个投票
Suppose that your file is called data.txt You can load the data simply with
load('data.txt');
which will create a variable called "data"
and the print it using
imagesc(data)
4 个评论
preet
2013-7-6
preet
2013-7-6
preet
2013-7-6
Hugo
2013-7-6
If I understood right, you said that the values are in matrix form in the file. That should mean that your file is structures as lines ending in a newline symbol, and each number in each line is separated by a space. If that's the case, no matter whether the numbers are integer or real, load(...) will give you a matrix with as many rows as lines in the file and as many columns as numbers in the line, provided the number of numbers is the same in each line.
Once this is solve, I don't know what your values represent. If the position in the matrix represents the position of the pixels and the value represents the colour, then image(...) should show the image. Otherwise, I think it's up to you what you really have and how you really want to represent it.
I hope this helps you. Good luck.
类别
在 帮助中心 和 File Exchange 中查找有关 Data Type Conversion 的更多信息
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!
Translated by 
