Is it possible to use Vehicle Network Toolbox with intrepid (vehicle spy) software?

Question

jose david Marzuca lozano 2021-4-26

0
链接

此问题的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/813910-is-it-possible-to-use-vehicle-network-toolbox-with-intrepid-vehicle-spy-software

回答： Siddhant Dange 2021-7-16

From the documentation I can see that Intrepid Hardware is not supported for Vehicle Network Toolbox. But is it possible to have a Virtual CAN bus as an input in Vehicle Spy? This way, Vehicle Spy would actually be transmitting the values, but they would be generated from a Simulink Model.

Thanks,

0 个评论
显示 -2更早的评论隐藏 -2更早的评论

请先登录，再进行评论。

请先登录，再回答此问题。

Answer 1

Siddhant Dange 2021-7-16

0
链接

此回答的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/813910-is-it-possible-to-use-vehicle-network-toolbox-with-intrepid-vehicle-spy-software#answer_748233

Hello Jose,

Unfortunately, Vehicle Spy does not support any other vendors than the ones provided by Intrepid Control Networks: https://cdn.intrepidcs.net/support/VehicleSpy/spyHard.htm. So, I do not believe you can create a virtual channel using any of our supported vendors (MathWorks, Kvaser or Vector) in Vehicle Spy.

Additionally, I am assuming you are trying to use the MathWorks Virtual Channels. These channels cannot be used outside of a single session of MATLAB or Simulink i.e. you cannot connect to a MathWorks Virtual Channel except in the session you are running it in: https://www.mathworks.com/help/vnt/ug/mathworks-virtual-channels.html.

Hope that helps,

Siddhant