Clickable Plot Where non-clicked lines go transparent?

Question

Amanda Beatty 2021-4-28

0
链接

此问题的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/816305-clickable-plot-where-non-clicked-lines-go-transparent

编辑： Jan 2021-4-30

I have some plots that I want to be able to click on one or more lines and have all the other lines go semi-transparent while the clicked lines are brought to the front. I also want these lines to be able to be deselected so that I can go back to none of them being transparent

Dumbed down version of my code so far:

figure(1)
clf
p = panel();% create panel on the figure
p.pack(2, groupCount);% setup two rows and however many columns there are groups
for i = 1:length(data)
    p(1, groupIdx(i)).select();%select the correct plot
    plot(data(i).x1data, data(i).y1data, 'tag',sprintf(data(i).id)); %plot each line and give it a tag
    p(2, groupIdx(i)).select();%select the correct plot
    H1(i) = plot(data(i).x2data, data(i).y2data, 'tag',sprintf(data(i).id)); %plot each line and give it a tag
    set(H1(i), 'ButtonDownFcn', {@LineSelected, H1(i)}); %make the line bold and at the front when it is clicked (from mathworks answer)
end

And then I got the following from this answer: https://www.mathworks.com/matlabcentral/answers/83231-how-to-use-the-mouse-to-select-and-identify-a-line-on-a-plot

function LineSelected(ObjectH, EventData, H)
    set(ObjectH, 'LineWidth', 2.5); %make bold
    set(H(H ~= ObjectH), 'LineWidth', 0.5); 
    uistack(ObjectH, 'top'); %bring it to the front
end

This lets me select one or more lines, and when I select them they are brought to the front and made bold, but since my plots are all kind of on top of each other it gets hard to see the data, especially bold. And on top of that, once a line is clicked it cannot be deselected, so it is bold until I re-run the script. So instead of being bold I want everything else to just go transparent, but I also want to be able to deselect the lines if needed.

0 个评论
显示 -2更早的评论隐藏 -2更早的评论

请先登录，再进行评论。

请先登录，再回答此问题。

Answer 1

Jan 2021-4-29

0
链接

此回答的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/816305-clickable-plot-where-non-clicked-lines-go-transparent#answer_687660

编辑：Jan 2021-4-29

在 MATLAB Online 中打开

To avoid setting the bolder linewidth, simply omit the change of the linewidth:

function LineSelected(ObjectH, EventData, H)
    uistack(ObjectH, 'top'); %bring it to the front
end

Unfortunately there is no Alpha property for lines. So you either have to emulate the line objects by using patch objects, or you need another method to increase the visibility of the selected line: maybe some markers or by using dots for the other lines?

How do you select a line, which is covered by other initially?

What about using the 3rd dimension, to distribute the lines horizontally for a better overview:

function SelectorExample
X = rand(10, 100);  % Ugly test data
FigH   = figure;
Axes1H = subplot(1,2,1, ...
   'Parent', FigH, 'NextPlot', 'add');
title(Axes1H, 'Data')
Axes2H = subplot(1,2,2, ...
   'Parent', FigH, 'NextPlot', 'add');
title(Axes2H, 'For selection');
view(Axes2H, 3);
UD.Line1H = plot(Axes1H, X);
UD.Line2H = plot3(1:100, repmat(1:10, 100, 1), X, ...
   'Parent', Axes2H);
set([UD.Line1H; UD.Line2H], 'ButtonDownFcn', {@SelectLine, FigH});
UD.Selected   = [];
FigH.UserData = UD;
end
function SelectLine(LineH, EventData, FigH)
UD    = FigH.UserData;
Index = find(LineH == UD.Line1H);
if isempty(Index)
   Index = find(LineH == UD.Line2H);
end
if isequal(Index, UD.Selected)  % Unselect:
   UD.Selected = [];
   UD.Line2H(Index).LineWidth = 0.5; 
else
   UD.Selected = Index;
   set(UD.Line2H,        'LineWidth', 0.5); 
   set(UD.Line2H(Index), 'LineWidth', 2.5); 
   uistack(UD.Line2H(Index), 'top'); 
   uistack(UD.Line1H(Index), 'top');
   
   % Some blinking?!
   for k = 1:5
      set(UD.Line1H(Index), 'LineWidth', 3.5);
      pause(0.1);
      set(UD.Line1H(Index), 'LineWidth', 0.5);
      pause(0.1);
   end
end
FigH.UserData = UD;
end

You need to enable the 3D rotation in the right axes to get a proper view direction for an easier selection. Afterwards you have to deselect the rotation mode to be able to select the lines. This switching can be avoided, but this code is only a demonstration.

The code lets the line in the left diagram blink. Maybe this helps to see it. The main problem remains, that diagrams with a lot of equal curves are more or less impossible to undestand. Even transparency would not be a great help.

3 个评论
显示 1更早的评论隐藏 1更早的评论

Amanda Beatty 2021-4-29

编辑：Amanda Beatty 2021-4-29

在 MATLAB Online 中打开

Thanks for your response. That's an interesting idea.

Typically the curves we want to highlight are at least somewhat different from the other curves (even if it's just a signgle spike up), so they aren't too dificult to click on. If they are all on top of each other then that's a good sign that the product is performing well and we don't tend to want to highlight these to point them out.

We currently use JMP to plot/highlight these traces (see below) and extract metrics and associated info, but since my data sets are so large it can take upwards of an hour just for JMP to plot all of these. Essentially I'm trying to mimic what JMP does, but in MATLAB since it's so much faster.

I like the idea of having an easier time selecting them using the 3D plot, but since we usually only look at the odd ones that stick out, it's not necessary. I also like the flashing idea, but since we usually screenshot these and put them on an internal website for sharing, I don't think I can utilize the flashing.

I implemented this bit of code but 1) changing the other lines to very thin and dotted doesn't appear to do anything (unsure if I'm doing it wrong or if that's just how it looks since each line is ~50,000 data points and is really dense/noisy), and 2) if it did do something I still can't "unselect" the yellow line I have already selected.

function LineSelected(ObjectH, EventData, H)
    %set(ObjectH, 'LineWidth', 2.5);
    set(H(H ~= ObjectH), 'LineWidth', 1/72);%make everything else the minimum line width
    set(H(H ~= ObjectH), 'LineSpec', ':');
    uistack(ObjectH, 'top');
end

Edit: After looking at your code (I'm trying and struggling to understant what exactly everything does), it looks like you actually implemented an "unselect" feature. And while playing with the graph it creates it clearly can be unselected. I'll try to implement that portion of your code into mine if I can figure it out.

Amanda Beatty 2021-4-29

在 MATLAB Online 中打开

Okay, I gave it my best shot of copying what you did and altering it to fit my needs. The code is a ways above my competency level, though. And the fact that my plotting is in a for loop is really making me struggle.

figure(1)
clf
p = panel();% create panel on the figure
p.pack(2, groupCount);% setup two rows and however many columns there are groups
for i = 1:length(data)
    p(1, groupIdx(i)).select();%select the correct plot
    UD(i).Line1 = plot(data(i).x1data, data(i).y1data, 'tag',sprintf(data(i).id)); %plot each line and give it a tag
    p(2, groupIdx(i)).select();%select the correct plot
    UD(i).Line2 = plot(data(i).x2data, data(i).y2data, 'tag',sprintf(data(i).id)); %plot each line and give it a tag
    set([UD(i).Line1; UD(i).Line2], 'ButtonDownFcn', {@SelectLine, Fig1});; %make the line bold and at the front when it is clicked (from mathworks answer)
    UD(i).Selected   = [];
end
FigH.UserData = UD;

function SelectLine(LineH, EventData, FigH)
UD    = FigH.UserData;
    for i=1:length(UD) %pretty sure this is wrong?
        if ~isempty(find(LineH == UD(i).Line2))
            Index=i; %find the index of the selected line
        end 
    end
    if isempty(Index)
        for i=1:length(UD)
            if ~isempty(find(LineH == UD(i).Line1))
                Index=i; %find the index of the selected line
            end 
        end
    end
    if isequal(Index, UD(Index).Line2)  % Unselect:
       UD(Index).Selected = [];
       UD(Index).Line2.LineWidth = 0.5; 
    else
       UD(Index).Selected = Index;
       set(UD(:).Line2,        'LineWidth', 1/72); 
       set(UD(Index).Line2, 'LineWidth', 0.5); 
       set(UD(:).Line1,        'LineWidth', 1/72); 
       set(UD(Index).Line1, 'LineWidth', 0.5); 
       uistack(UD(Index).Line2, 'top'); 
       uistack(UD(Index).Line1, 'top');
    end
FigH.UserData = UD;
end

It, of course, errors out "Error while evaluating ButtonDownFcn" on this line:

set(UD(:).Line2, 'LineWidth', 1/72);

Jan 2021-4-30

编辑：Jan 2021-4-30

在 MATLAB Online 中打开

In your code "UD(:).Line2" is a comma separated list, but you need a vector. Simply include it in square brackets: [UD(:).Line2] .

The code gets much easier, if you store vectors in the scalar struct, instead of scalars as fields of a struct array:

UD(i).Line1
% ==>
UD.Line1(i)

请先登录，再进行评论。

Clickable Plot Where non-clicked lines go transparent?

0 个评论
显示 -2更早的评论隐藏 -2更早的评论

回答（1 个）

3 个评论
显示 1更早的评论隐藏 1更早的评论

另请参阅

类别

标签

Community Treasure Hunt

Clickable Plot Where non-clicked lines go transparent?

0 个评论 显示 -2更早的评论隐藏 -2更早的评论

回答（1 个）

3 个评论 显示 1更早的评论隐藏 1更早的评论

另请参阅

类别

标签

Community Treasure Hunt

0 个评论
显示 -2更早的评论隐藏 -2更早的评论

3 个评论
显示 1更早的评论隐藏 1更早的评论