Cannot import trained network

7 次查看（过去 30 天）
yongbo chen
yongbo chen 2021-6-5
评论： yongbo chen 2021-6-19
I trained a network using tensorflow 2.0 in windows 10. It works fine and can output the predicted result. However, when I try to use "net = importKerasNetwork('model.h5')", MATLAB has the following error:
Error using assembleNetwork (line 47)
Invalid network.
Error in nnet.internal.cnn.keras.importKerasNetwork (line 35)
Network = assembleNetwork(LayersOrGraph);
Error in importKerasNetwork (line 91)
Network = nnet.internal.cnn.keras.importKerasNetwork(modelfile, varargin{:});
Caused by:
Network: Missing output layer. The network must have at least one output layer.
Layer 'conv2d_8_OutputLayer_PLACEHOLDER': Unconnected output. Each layer output must be connected to the input
of another layer.
Layer 'conv2d_8_OutputLayer_PLACEHOLDER': Layer validation failed. Error using 'forward' in Layer
nnet.keras.layer.PlaceholderOutputLayer. The function threw an error and could not be executed.
Error using nnet.internal.cnn.layer.util.CustomLayerLegacyStrategy/forward (line 42)
Networks containing PlaceholderLayers cannot be trained or used for prediction. Either remove or replace
all PlaceholderLayers.
Any possible way to revise it? Thanks a lot.

请先登录，再回答此问题。

回答（2 个）

Divyam Gupta
Divyam Gupta 2021-6-8
Hi Yongbo,
I understand that you're having an issue in importing a trained network. The error that I notice is that your network is missing an output layer. Please refer to the following answer on MATLAB Central which discusses a similar issue that you are facing: https://www.mathworks.com/matlabcentral/answers/673738-importkerasnetwork-for-custom-loss-function
Hope this helps.
Abhishek Gupta
Abhishek Gupta 2021-6-9
Hi,
As per my understanding, you are getting an error while importing a network.
If your network doesn't have a loss layer, then you need to import your network using importKerasLayers and add a custom output layer at the end, or you can convert the layerGraph to dlnetwork.
Referring to the following documentation, which might help you in resolving the issue: -
https://www.mathworks.com/help/deeplearning/ref/importkerasnetwork.html#mw_5508ae26-34ca-4ae8-887e-89598dc5217f
  3 个评论
显示 1更早的评论
Abhishek Gupta
Abhishek Gupta 2021-6-15
You are getting this error because the second argument of your predict function is not of type dlarray. For more information related to the input data, check out this documentation link: -https://www.mathworks.com/help/deeplearning/ref/dlnetwork.predict.html#function_dlnetwork_sep_predict_sep_mw_bfae26e4-e62e-4b46-80e2-3d3f8305b520
yongbo chen
yongbo chen 2021-6-19
Thank you very much for your answer. I have revised the input and get the predict result. However, I find that the output of the network is totally different from the result from tensor flow using python. The trained network "lgraph" from tensorflow 2.4.1. Any possible way to solve this problem:
lgraph = importTensorFlowLayers('D:\models');
I = imread('D:\1.jpg');
dlX = dlarray(single(I),'SSCB');
dlnet = dlnetwork(lgraph);
dlY = predict(dlnet,dlX);
x = extractdata(dlY);

请先登录，再进行评论。

类别

在 Help Center 和 File Exchange 中查找有关 Image Data Workflows 的更多信息

标签

产品


版本

R2020b

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by