How to extract two signals from two different USRP devices connected with MIMO expansion cable?

Question

Dzana Pivac 2021-7-16

0
链接

此问题的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/879953-how-to-extract-two-signals-from-two-different-usrp-devices-connected-with-mimo-expansion-cable

评论： Karunya Choppara 2024-8-27

I am working tith Matlab2020a and USRP Support Package. I want to present a concept of diversity in mobile communications, therefore I am using two N210 USRP devices (SBX motherboard) and Rx port on each of them. Two USRP devices are connected with MIMO expansion cable. Both of USRP's have static IP address '192.168.10.2' and my computer network IP address is set to '192.168.10.1'.

Problem that I am facing is not being able to extract two signals, one from every USRP. When I call the findsdru command:

connectedRadios = findsdru;

I get structure 1x2 where I can see that both of USRP's are connected successfully. When I tried connecting one USRP device, using the command comm.SDRuReceiver I was able to get received signal x1 from the receiving anntena. I did that in the following way:

connectedRadios = findsdru;
if strncmp(connectedRadios(1).Status, 'Success', 7)
  radioFound = true;
  platform = connectedRadios(1).Platform;
  switch connectedRadios(1).Platform
    case {'B200','B210'}
      address = connectedRadios(1).SerialNum;
    case {'N200/N210/USRP2','X300','X310','N300','N310','N320/N321'}
      address = connectedRadios(1).IPAddress;
  end
else
  radioFound = false;
  address = '192.168.10.2';
  platform = 'N200/N210/USRP2';
end
fmRxParams = getParamsSdruFMExamples(platform)
switch platform
  case {'B200','B210'}
    radio1 = comm.SDRuReceiver(...
      'Platform', platform, ...
      'SerialNum', address, ...
      'MasterClockRate', fmRxParams.RadioMasterClockRate);
  case {'X300','X310','N300','N310','N320/N321'}
    radio1 = comm.SDRuReceiver(...
      'Platform', platform, ...
      'IPAddress', address, ...
      'MasterClockRate', fmRxParams.RadioMasterClockRate);
  case {'N200/N210/USRP2'}
    radio1 = comm.SDRuReceiver(...
      'Platform', platform, ...
      'IPAddress', address);
end
radio1 = comm.SDRuReceiver('192.168.10.2');
radio1.CenterFrequency  = 500000000;
radio1.Gain = fmRxParams.RadioGain;
radio1.DecimationFactor = fmRxParams.RadioDecimationFactor;
radio1.SamplesPerFrame = fmRxParams.RadioFrameLength;
radio1.OutputDataType = 'single'
hwInfo = info(radio1)
fmBroadcastDemod = comm.FMBroadcastDemodulator(...
    'SampleRate', fmRxParams.RadioSampleRate, ...
    'FrequencyDeviation', fmRxParams.FrequencyDeviation, ...
    'FilterTimeConstant', fmRxParams.FilterTimeConstant, ...
    'AudioSampleRate', fmRxParams.AudioSampleRate, ...
    'PlaySound', true, ...
    'BufferSize', fmRxParams.BufferSize, ...
    'Stereo', true);
if radioFound
  % Loop until the example reaches the target stop time, which is 10
  % seconds.
  timeCounter = 0;
  while timeCounter < fmRxParams.StopTime
    [x1, len] = step(radio1);
    if len > 0
      % FM demodulation
      step(fmBroadcastDemod, x1);
      % Update counter
      timeCounter = timeCounter + fmRxParams.AudioFrameTime;
    end
  end
else
  warning(message('sdru:sysobjdemos:MainLoop'))
end
release(fmBroadcastDemod)
release(radio1)

Now, I would like to get signal x2 in the same way from the second USRP, but I don't know how. Am I supposed to change the IP address of one of the USRP's or I can manage this problem using the Matlab functions.

1 个评论
显示 -1更早的评论隐藏 -1更早的评论

Firas Dawod 2022-3-10

Hi Dzana,

Could you able to have phase coherence (or sychronization) between two USRP N210 using MiMO extension cable? I tried the samething with MATLAB Simulink but it did not work, as there was no option to receive the clock through the MiMO cable in the SDRu receiver block.

please let me know if it is possible to do that in MATLAB Simulink.

Thanks

Firas

请先登录，再进行评论。

请先登录，再回答此问题。

Answer 1

Karunya Choppara 2021-7-20

0
链接

此回答的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/879953-how-to-extract-two-signals-from-two-different-usrp-devices-connected-with-mimo-expansion-cable#answer_750243

Hi

You can set a new IP address to the N210 radio using setsdruip function, as described on this page

https://in.mathworks.com/help/supportpkg/usrpradio/ug/setsdruip.html

1 个评论
显示 -1更早的评论隐藏 -1更早的评论

Dzana Pivac 2021-7-20

Thank you, I've solved it.

请先登录，再进行评论。

Answer 2

Firas Dawod 2022-4-15

0
链接

此回答的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/879953-how-to-extract-two-signals-from-two-different-usrp-devices-connected-with-mimo-expansion-cable#answer_943880

I tried also to synchronize (phase cohernce) two USRP N200 with MIMO cable but it did not work as there is no option for mimo cable in sdruReciver. Therefore, we purchase USRP B210.

1 个评论
显示 -1更早的评论隐藏 -1更早的评论

Karunya Choppara 2024-8-27

MIMO cable synchronization for USRP N210 radios is available in R2024b release MATLAB

请先登录，再进行评论。

How to extract two signals from two different USRP devices connected with MIMO expansion cable?

1 个评论
显示 -1更早的评论隐藏 -1更早的评论

采纳的回答

1 个评论
显示 -1更早的评论隐藏 -1更早的评论

更多回答（1 个）

1 个评论
显示 -1更早的评论隐藏 -1更早的评论

另请参阅

类别

标签

产品

版本

Community Treasure Hunt

How to extract two signals from two different USRP devices connected with MIMO expansion cable?

1 个评论 显示 -1更早的评论隐藏 -1更早的评论

采纳的回答

1 个评论 显示 -1更早的评论隐藏 -1更早的评论

更多回答（1 个）

1 个评论 显示 -1更早的评论隐藏 -1更早的评论

另请参阅

类别

标签

产品

版本

Community Treasure Hunt

1 个评论
显示 -1更早的评论隐藏 -1更早的评论

1 个评论
显示 -1更早的评论隐藏 -1更早的评论

1 个评论
显示 -1更早的评论隐藏 -1更早的评论