isosurface with wall thickness

15 次查看（过去 30 天）
Carolin Widmann
Carolin Widmann 2021-7-28
评论： Star Strider 2021-8-1
Hello everyone,
I would like to plot a gyroid with a wall thickness.
So far I am using Isosurface to plot the gyroid.
Does anyone know how to add a wall thickness?
I am looking forward to your help!
Thanks!
clear all;
close all;
clc;
tic;
x_period = 3.2*pi;
y_period = 3.2*pi;
z_period = 2.4*pi;
rate = pi/16;%64;
frequency = 2.5;%1.25;
[x,y,z] = meshgrid(0:rate:x_period, 0:rate:y_period, 0:rate:z_period);
f = cos(frequency*x).*sin(frequency*y) + cos(frequency*y).*sin((frequency*z)+pi/2) + cos((frequency*z)+pi/2).*sin(frequency*x);
figure(1)
isosurface(x,y,z,f,0)
axis equal
xlabel('X')
ylabel('Y')
zlabel('Z')
hold on
figure(2)
isosurface(x,y,z,f,0)
axis equal
xlabel('X')
ylabel('Y')
zlabel('Z')
view(2)
figure(3)
isosurface(x,y,z,f,0)
axis equal
xlabel('X')
ylabel('Y')
zlabel('Z')
% view(-45,36)
% view(0,0) % parallel
view(90,0) % perpendicular
% set(gca,'XTickLabel',[],'YTickLabel',[],'ZTickLabel',[]);
% set(gca,'Visible','off')
fv = isosurface(x,y,z,f,'verbose');
d = x_period/(2*(x_period*frequency/pi)) - 0.1;
toc;

请先登录，再回答此问题。

回答（2 个）

darova
darova 2021-7-29
Ran in:
What abouy simply to make thicker a lines?
[x,y,z] = peaks(30);
surf(x,y,z,'linewidth',3)
Star Strider
Star Strider 2021-7-29
Ran in:
There does not appear to be any way to change the thickness of the plotted surface.
The best I can come up with is the revised figure(2) that plots two slightly scaled versions of the same surface together, so one is slightly smaller than the other. I only changed that one plot, not the ones following it.
(If that does not do what you want, I will delete my Answer.)
tic;
x_period = 3.2*pi;
y_period = 3.2*pi;
z_period = 2.4*pi;
rate = pi/16;%64;
frequency = 2.5;%1.25;
[x,y,z] = meshgrid(0:rate:x_period, 0:rate:y_period, 0:rate:z_period);
f = cos(frequency*x).*sin(frequency*y) + cos(frequency*y).*sin((frequency*z)+pi/2) + cos((frequency*z)+pi/2).*sin(frequency*x);
figure(1)
isosurface(x,y,z,f,0)
axis equal
xlabel('X')
ylabel('Y')
zlabel('Z')
xf = 0.996; % Scaling Factor
figure(2) % Plots Two Scaled Versions Together
isosurface(x*xf,y*xf,z*xf,f,0)
axis equal
xlabel('X')
ylabel('Y')
zlabel('Z')
hold on
isosurface(x/xf,y/xf,z/xf,f,0)
hold off
figure(3)
isosurface(x,y,z,f,0)
axis equal
xlabel('X')
ylabel('Y')
zlabel('Z')
view(2)
figure(4)
isosurface(x,y,z,f,0)
axis equal
xlabel('X')
ylabel('Y')
zlabel('Z')
% view(-45,36)
% view(0,0) % parallel
view(90,0) % perpendicular
% set(gca,'XTickLabel',[],'YTickLabel',[],'ZTickLabel',[]);
% set(gca,'Visible','off')
fv = isosurface(x,y,z,f,'verbose');
ISOSURFACE: Computing triangles and vertices... V-done ...................................... ISOSURFACE: number of vertices=38951 number of triangles=75580
d = x_period/(2*(x_period*frequency/pi)) - 0.1;
toc;
Elapsed time is 3.183315 seconds.
.
  2 个评论
Carolin Widmann
Carolin Widmann 2021-8-1
Hi thanks for your answer!
Is there the possibility to connect both versions, so that it looks like one in the end?
Best regards!
Star Strider
Star Strider 2021-8-1
Ran in:
My pleasure!
I doubt that is possible. The only option I can think of is to use a loop to gradually fill the gaps simply by drawing the same scaled surface several times.
This is my best effort:
tic;
x_period = 3.2*pi;
y_period = 3.2*pi;
z_period = 2.4*pi;
rate = pi/16;%64;
frequency = 2.5;%1.25;
[x,y,z] = meshgrid(0:rate:x_period, 0:rate:y_period, 0:rate:z_period);
f = cos(frequency*x).*sin(frequency*y) + cos(frequency*y).*sin((frequency*z)+pi/2) + cos((frequency*z)+pi/2).*sin(frequency*x);
figure(1)
isosurface(x,y,z,f,0)
axis equal
xlabel('X')
ylabel('Y')
zlabel('Z')
xf = 0.99; % Scaling Factor
figure(2) % Plots Two Scaled Versions Together
isosurface(x*xf,y*xf,z*xf,f,0)
axis equal
xlabel('X')
ylabel('Y')
zlabel('Z')
hold on
for k = 1:10
xfk = xf+((k-1)*(1-xf)/10)
isosurface(x/xfk,y/xfk,z/xfk,f,0)
end
xfk = 0.9900
xfk = 0.9910
xfk = 0.9920
xfk = 0.9930
xfk = 0.9940
xfk = 0.9950
xfk = 0.9960
xfk = 0.9970
xfk = 0.9980
xfk = 0.9990
hold off
% figure(3)
% isosurface(x,y,z,f,0)
% axis equal
% xlabel('X')
% ylabel('Y')
% zlabel('Z')
% view(2)
%
% figure(4)
% isosurface(x,y,z,f,0)
% axis equal
% xlabel('X')
% ylabel('Y')
% zlabel('Z')
% % view(-45,36)
% % view(0,0) % parallel
% view(90,0) % perpendicular
% % set(gca,'XTickLabel',[],'YTickLabel',[],'ZTickLabel',[]);
% % set(gca,'Visible','off')
% fv = isosurface(x,y,z,f,'verbose');
%
% d = x_period/(2*(x_period*frequency/pi)) - 0.1;
toc;
Elapsed time is 4.311571 seconds.
Experiment with it to get the result you want.
.

请先登录，再进行评论。

类别

在 Help Center 和 File Exchange 中查找有关 Scalar Volume Data 的更多信息

标签

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by