Rasperry Pi target hardware wont install

Question

Josef 2013-10-15

0
链接

此问题的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/90260-rasperry-pi-target-hardware-wont-install

回答： junaid 2015-2-1

Hi I have been trying to install the Raspberry Pi target package but keep getting the following error, does anyone know what might be the cause?

Processing archive: C:\MATLAB\SupportPackages\R2013a\downloads\raspberrypi_7_26_2013_v1_0.img.7z

Extracting raspberrypi_7_26_2013_v1_0.img Data Error

Sub items Errors: 1

Many thanks Joe

0 个评论
显示 -2更早的评论隐藏 -2更早的评论

请先登录，再进行评论。

请先登录，再回答此问题。

Answer 1

Sorath Asnani 2014-9-10

0
链接

此回答的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/90260-rasperry-pi-target-hardware-wont-install#answer_151294

Have anyone found the solution to this problem? I am also getting the same error. Help Please!!

3 个评论
显示 1更早的评论隐藏 1更早的评论

Sorath Asnani 2014-9-10

Thanks Josef for your prompt response! Ok let me try this again. Will come back soon here hopefully.

Sorath Asnani 2014-9-11

Yes! Problem resolved.. The cause of the problem was internet connection. I deleted all the Matlab Support Package for Raspberry pi and then installed it again. And it was installed successfully. Thank You very Much Dear Josef!

请先登录，再进行评论。

Answer 2

Murat Belge 2013-12-9

1
链接

此回答的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/90260-rasperry-pi-target-hardware-wont-install#answer_117876

Can you decompress the firmware manually using 7zip? Go to the folder where MATLAB downloaded the firmware, manually decompress it and follow the firmware update steps afterwards. If the firmware update GUI finds the decompressed firmware, it won't try to decompress it again.

Also check that you hardware has enough space. The firmware image is about 2 GB.