The ability to implement an improper transfer function (without delays) is not available in the Transfer Function and LTI System blocks.
To work around this issue, you can implement the transfer function using the Derivative and Integrator blocks.
An example/workaround for improper transfer functions (without delays) is as follows:
Consider the following transfer function:
>> num = [4.03*.064*1.06e-5 .064 4.30];
>> den = [.064*1.06e-5 1];
>> tf(num,den)
ans =
2.734e-06 s^2 + 0.064 s + 4.3
-----------------------------
6.784e-07 s + 1
We can do a partial fraction decomposition:
>> [r,p,k] = residue(num,den);
Now the 3 systems can be implemented in Simulink as:
% SYSTEM 1: Implemented as an "LTI System" block
% https://www.mathworks.com/help/control/ref/ltisystem.html
sys1 = tf(r(1),[1,-p(1)]);
% SYSTEM 2: Implemented as a gain and a du/dt block
% https://www.mathworks.com/help/simulink/slref/derivative.html
k(1)*s
% SYSTEM 3: Implemented as a gain block
k(2)
These three systems should be summed in parallel. For instance, a basic setup with a "Step" input may look like:
