What type of Joint is a Straight Slot ?
3 次查看(过去 30 天)
显示 更早的评论
Bar revolves at pt A. End of length is the straight slot which connects to a fix linear actuator perpendicular to the bar.
actuator linear pull stroke. clevis joint translate in straight slot.
what type of joint is this straight slot. and how to couple?
0 个评论
回答(1 个)
Arnaud Miege
2011-4-15
If I understand correctly, you want to model a joint with some clearance, is that right? The trick is to measure the position and velocity of the joint, and then use a collision force law, which provides a restoring stifness (and damping) when the penetration (position) goes outside a defined range, e.g:
F = 0 if abs(x) <= x_0, k*(x-x0)+b*x_dot when abs(x) > x_0.
similar to what's in the "Backlash Actuation" subsystem of mech_gears_backlash or in the "Contact Force" subsystem of mech_bouncing_ball.
HTH,
Arnaud
1 个评论
Arnaud Miege
2011-4-15
PS: probably best to use a custom joint with one revolute and one prismatic primitive, and apply the restoring force or backlash actuation on the prismatic one.
另请参阅
类别
在 Help Center 和 File Exchange 中查找有关 Assembly 的更多信息
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!