Two translational ports on a Mass block in SimScape

Question

Kaustubh Surdi 2011-6-21

1
链接

此问题的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/9918-two-translational-ports-on-a-mass-block-in-simscape

评论： Mohmmad 2014-8-12

Hi, I am trying to build a 6 DOF(mass-spring-damper) model in SimScape. The mass block in it has only one translational port. How do you connect another spring-damper to the other side of the mass block? Or is there any other way to build this model? Thanks in advance.

1 个评论
显示 -1更早的评论隐藏 -1更早的评论

Mohmmad 2014-8-12

Hi, could you be able to solve this problem? Can you help me please on this problem. i have the same problem with mass and spring and damper. If you give me a screen shot of your model then i can figure it out

Thank you

请先登录，再进行评论。

请先登录，再回答此问题。

Answer 1

Arnaud Miege 2011-6-22

1
链接

此回答的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/9918-two-translational-ports-on-a-mass-block-in-simscape#answer_13845

Do you mean like this?

Arnaud

3 个评论
显示 1更早的评论隐藏 1更早的评论

Kaustubh Surdi 2011-6-23

Hi Arnaud,

Thanks for the response. Please take a look at the link below. The model on it is what I am trying to build in Simscape.

http://www.me.mtu.edu/imac_mpe/MPE%20Calibration%20Data%20Description.htm

But from your answer, it looks like I won't be able to create that in Simscape. I will try to learn SimMechanics and see if I can build it there..

Any suggestions on that?

Thanks again.

Arnaud Miege 2011-6-28

This is a standard 1D mechanical system and is perfectly well suited to Simscape. Use a similar approach to the screenshot I included in my answer. You don't need SimMechanics for this.

请先登录，再进行评论。