Feeds
提问
Which spectrum (pwelch vs. spectrumAnalyzer) is correct?
I have two data which I want to see difference in frequency domain. I tried with pwelch function which shows they are quite clos...
3 months 前 | 0 个回答 | 0
0
个回答提问
Shows "vertcat error" in CIC
I had a vertcat error while using a CIC filter. It seems that's because y is a row vector. Once I changed y to a column vector l...
3 months 前 | 1 个回答 | 0
1
个回答提问
FIR filter decomposition (single rate)?
I have a long single rate FIR filter. Due to a hardware limitation, I want to decompose it into two or more cascaded FIR filters...
4 months 前 | 1 个回答 | 0
1
个回答提问
Filter cascade with raised cosine filter and half-band filter
I've created a raised cosine filter and a half-band filter, respectively, and want to cascade them. However, I got "Numeric stag...
5 months 前 | 1 个回答 | 0
1
个回答提问
How to get LUT values from the NCO object?
I'm trying to learn NCO and MATLAB has the following example. df = 0.05; % Frequency resolution = 0.05 Hz minSFDR = 96; % Spur...
6 months 前 | 1 个回答 | 0
1
个回答提问
Number of bits per symbol (m) range in Reed-Solomon coding
I'm playing around with Reed-Solomon codes. In the parameters of rsenc, help shows m represents the "number of bits per symbol" ...
11 months 前 | 2 个回答 | 0
2
个回答提问
Update a value in a struct in another function
I have a struct which is initialized by this: function myStruct = defult_config myStruct.myLenth = 1; end myStruct.myLength ...
1 year 前 | 2 个回答 | 0
2
个回答提问
How do I know how the output of FIR filter were calculated (e.g., each of summands of the FIR)?
For a given set of FIR coefficient b and input data input, I generate FIR output using filter function (e.g., output = filter(b,...
1 year 前 | 1 个回答 | 0
1
个回答提问
CIC compensation filter design
I have a CIC filter as below: Decimation factor: 20 Differential Delay: 1 Number of sections: 4 I created cicDecim object by...
1 year 前 | 0 个回答 | 0
0
个回答提问
How to do a Biquad (SOS) filtering
I have the following filters which I want to implement with cascade of multiple second-order sections (SOS). %% Filter_1 h = ...
1 year 前 | 1 个回答 | 0
1
个回答提问
convert decimal to hex with 3 digit
I just realized that converting -30 to hexadecial by dec2hex(-30) is different from its converting back by hex2dec('E2'). Any su...
1 year 前 | 1 个回答 | 0
1
个回答提问
The location of decimated sample in CIC Decimator?
In a CIC Decimator, which sample is chosen among others? For example, here is the original input. input = [x1 x2 x3 x4 x5 x6 x7...
1 year 前 | 1 个回答 | 0
1
个回答提问
The first CIC Decimator output is always zero
It seems that the first CIC Decimator output is always zero and I don't understand its behavior. I generated the input data and...
1 year 前 | 1 个回答 | 0
1
个回答提问
CIC decimation output is strange (Output word length and negative fractional length)
I'm implementing fixed point CIC decimation filter with following requirements -- Decimation factor: 20 Number of CIC stages: ...
1 year 前 | 1 个回答 | 0
1
个回答提问
Magnitude response of allpass filter - group-delay equalization of an IIR filter
In iirgrpdelay help page, the following example was provided for a group delay equalization of an IIR filter: [be,ae] = ellip(4...
2 years 前 | 1 个回答 | 0
1
个回答提问
Converting 4th order IIR filter to SOS (second-order sections)
I've designed 4th order allpass IIR filter using 'iirgrpdelay' and have the numerator and denominator which are 1-by-5 vectors. ...
2 years 前 | 1 个回答 | 0
1
个回答已回答
CPFSK demodulator performance in MATLAB example with enabling modulation index
This is self-answering - I found the reason why the error rates are strange other than "modulation index" of 0.5. CPFSKDemodulat...
CPFSK demodulator performance in MATLAB example with enabling modulation index
This is self-answering - I found the reason why the error rates are strange other than "modulation index" of 0.5. CPFSKDemodulat...
2 years 前 | 0
| 已接受
提问
CPFSK demodulator performance in MATLAB example with enabling modulation index
I've been checking CPFSK performance against various modulation indices and SNR. MATLAB has nice examples in comm.CPFSKModulat...
2 years 前 | 1 个回答 | 0
1
个回答提问
Number of filter taps in Gaussian filter design
Hello, I'm desinging a pulse shaping filter where the filter covers a span of 5 inputs symbols and 12 times of input symbol r...
2 years 前 | 1 个回答 | 0
1
个回答提问
Oversampling factor parameter for fsk modulation with gaussian shaping filter
Hello, I have been playing around with fskmod with gaussdesign (e.g., fsk modulation and filtering with a gaussian shaping filt...
2 years 前 | 1 个回答 | 0
