Programming Languages:
C++
Spoken Languages:
English
Pronouns:
He/him
C++
Spoken Languages:
English
Pronouns:
He/him
Feeds
已回答
Issue running HIL converting "Design a Guidance System in MATLAB and Simulink" guidance stateflow into HDL using HDL Coder
The Stateflow chart inside the Guidance subsystem is not HDL compatible. You can verify HDL compatibility by using the command ...
Issue running HIL converting "Design a Guidance System in MATLAB and Simulink" guidance stateflow into HDL using HDL Coder
The Stateflow chart inside the Guidance subsystem is not HDL compatible. You can verify HDL compatibility by using the command ...
1 hour 前 | 0
已回答
Issue with UITable Style Updates After TreeSelectionChanged Event in App Designer
Based on the behavior you’re describing, the issue is likely caused by interleaving of UI processing, where intermediate operati...
Issue with UITable Style Updates After TreeSelectionChanged Event in App Designer
Based on the behavior you’re describing, the issue is likely caused by interleaving of UI processing, where intermediate operati...
1 hour 前 | 0
已回答
MATLAB与云服务器中ROS2的通信是否可行
Yes, communicating with ROS 2 (Humble) from MATLAB is feasible, but cloud and cross-network setups often require additional conf...
MATLAB与云服务器中ROS2的通信是否可行
Yes, communicating with ROS 2 (Humble) from MATLAB is feasible, but cloud and cross-network setups often require additional conf...
2 hours 前 | 0
已回答
如何在2026Prerelease 版本的matlab中安装matlab parallel server？
This is a known limitation. MATLAB Parallel Server is supported only with non‑prerelease versions of MATLAB and must match the c...
如何在2026Prerelease 版本的matlab中安装matlab parallel server？
This is a known limitation. MATLAB Parallel Server is supported only with non‑prerelease versions of MATLAB and must match the c...
19 hours 前 | 0
已回答
Training error when use selfAttentionLayer with DropOut
I was able to run the provided "dlnetwork" model code without encountering any errors. Based on this, the issue does not appear ...
Training error when use selfAttentionLayer with DropOut
I was able to run the provided "dlnetwork" model code without encountering any errors. Based on this, the issue does not appear ...
19 hours 前 | 0
| 已接受
已回答
Matlab Online will not open Simulink Blank Model
Assuming you have not already done so, I would recommend clearing the cookies for your browser and then retrying. Additionally, ...
Matlab Online will not open Simulink Blank Model
Assuming you have not already done so, I would recommend clearing the cookies for your browser and then retrying. Additionally, ...
20 hours 前 | 0
已回答
"operation not allowed" when accessing network drive
It does sound like this is related to macOS privacy controls rather than traditional file‑system permissions. Even if MATLAB has...
"operation not allowed" when accessing network drive
It does sound like this is related to macOS privacy controls rather than traditional file‑system permissions. Even if MATLAB has...
20 hours 前 | 0
已回答
Disable reset of Jacobian
If your primary goal is to reduce the frequency of solver or state resets, you may find it helpful to try the troubleshooting st...
Disable reset of Jacobian
If your primary goal is to reduce the frequency of solver or state resets, you may find it helpful to try the troubleshooting st...
22 hours 前 | 0
已回答
Error exporting Onshape CAD to Simscape Multibody when using smexportonshape(): Dot indexing is not supported for variables of this type.
This issue appears to be related to the specific implementation of "smexportonshape_implementation". In such cases, it may be he...
Error exporting Onshape CAD to Simscape Multibody when using smexportonshape(): Dot indexing is not supported for variables of this type.
This issue appears to be related to the specific implementation of "smexportonshape_implementation". In such cases, it may be he...
22 hours 前 | 0
已回答
Why is Simulink throwing "duplicate file" warnings when opening any model?
When starting Simulink in R2025b, some warnings may appear during initialization. The “duplicate feature / duplicate file” warn...
Why is Simulink throwing "duplicate file" warnings when opening any model?
When starting Simulink in R2025b, some warnings may appear during initialization. The “duplicate feature / duplicate file” warn...
1 day 前 | 0
已回答
Unable to connect to given URL.
It seems that “https://fred.stlouisfed.org/” is down. FRED is moving away from this URL for its data retrieval to a new API. T...
Unable to connect to given URL.
It seems that “https://fred.stlouisfed.org/” is down. FRED is moving away from this URL for its data retrieval to a new API. T...
1 day 前 | 0
已回答
system command error within a parfor
Sometimes, if there are any installation-related issues, reinstalling the Parallel Computing Toolbox may help resolve the proble...
system command error within a parfor
Sometimes, if there are any installation-related issues, reinstalling the Parallel Computing Toolbox may help resolve the proble...
2 days 前 | 0
已回答
SimScape Error in 7.1 feedback control task 3
I also tried the same model setup as you, and in my case, it passed the assessment. I suggest reviewing all the parameters and c...
SimScape Error in 7.1 feedback control task 3
I also tried the same model setup as you, and in my case, it passed the assessment. I suggest reviewing all the parameters and c...
4 months 前 | 0
已回答
model_referenceブロックを利用したコアモデル（≒汎用モデル）活用時のIFに関して
I have assumed that you want advise on an appropriate approach or method to keep the battery model as a generic model while allo...
model_referenceブロックを利用したコアモデル（≒汎用モデル）活用時のIFに関して
I have assumed that you want advise on an appropriate approach or method to keep the battery model as a generic model while allo...
4 months 前 | 1
| 已接受
已回答
.mldatx file lost all data in the “Archive” section after saving failed due to insufficient disk space, while file size remains unchanged
It sounds like the save interruption left the .mldatx container with a valid outer file but an inconsistent SDI manifest/index, ...
.mldatx file lost all data in the “Archive” section after saving failed due to insufficient disk space, while file size remains unchanged
It sounds like the save interruption left the .mldatx container with a valid outer file but an inconsistent SDI manifest/index, ...
4 months 前 | 1
| 已接受
已回答
I am having issues with MATLAB System blocks losing their default values under certain conditions.
I would suggest you to reach out to the MathWorks Technical Support regarding the issue.
I am having issues with MATLAB System blocks losing their default values under certain conditions.
I would suggest you to reach out to the MathWorks Technical Support regarding the issue.
4 months 前 | 0
已回答
How to Measure True Local Deformation in a Craig–Bampton Reduced Order Flexible Body in Simscape Multibody?
In Simscape Multibody with Craig–Bampton reduced-order flexible bodies, a Transform Sensor attached to an interface frame measur...
How to Measure True Local Deformation in a Craig–Bampton Reduced Order Flexible Body in Simscape Multibody?
In Simscape Multibody with Craig–Bampton reduced-order flexible bodies, a Transform Sensor attached to an interface frame measur...
4 months 前 | 0
已回答
Improved Golf Optimization for Feature Selection in Palm Vein and Fingerprint Biometrics (MATLAB)
Based on the assumption that the problem statement is similar to any other optimisation problem, 1. Fitness Function Design We...
Improved Golf Optimization for Feature Selection in Palm Vein and Fingerprint Biometrics (MATLAB)
Based on the assumption that the problem statement is similar to any other optimisation problem, 1. Fitness Function Design We...
4 months 前 | 0
| 已接受
已回答
4th Order Runge Kutta using Numerical Integration
Assuming your supporting functions are correct, the core issue appears to be in the 4th Runge-Kutta's method implementation: you...
4th Order Runge Kutta using Numerical Integration
Assuming your supporting functions are correct, the core issue appears to be in the 4th Runge-Kutta's method implementation: you...
4 months 前 | 0
已回答
Fenster um Peaks (Stoß) automatisch bestimmen: linke/rechte Seite variabel
A practical way to define pulse start/end indices is to combine several methods and choose what best fits your signal characteri...
Fenster um Peaks (Stoß) automatisch bestimmen: linke/rechte Seite variabel
A practical way to define pulse start/end indices is to combine several methods and choose what best fits your signal characteri...
4 months 前 | 1
| 已接受
已回答
Specialized Power Systems is installed but does not show up in Library Browser (R2025b Update 2)
The SPS library is planned for removal in R2026a (Release Notes for Simscape Electrical). To make the transition smoother, I wou...
Specialized Power Systems is installed but does not show up in Library Browser (R2025b Update 2)
The SPS library is planned for removal in R2026a (Release Notes for Simscape Electrical). To make the transition smoother, I wou...
4 months 前 | 0
已回答
官方“构建 CAN 通信 Simulink 模型”文档can接收部分，每次运行的结果不一样
Assuming the CAN Transmit/Receive blocks behave like standard triggered function‑call subsystems, I suspect that the inconsisten...
官方“构建 CAN 通信 Simulink 模型”文档can接收部分，每次运行的结果不一样
Assuming the CAN Transmit/Receive blocks behave like standard triggered function‑call subsystems, I suspect that the inconsisten...
4 months 前 | 0
已回答
axis label subscript in latex environment
Upon reviewing the figure, the character E is indeed rendered as a subscript; however, because it is uppercase, it occupies more...
axis label subscript in latex environment
Upon reviewing the figure, the character E is indeed rendered as a subscript; however, because it is uppercase, it occupies more...
4 months 前 | 1
已回答
Approach for Neural network
You might consider framing this as a surrogate that learns the mapping from load inputs (P,Q) to state outputs (bus voltage magn...
Approach for Neural network
You might consider framing this as a surrogate that learns the mapping from load inputs (P,Q) to state outputs (bus voltage magn...
4 months 前 | 0
已回答
Passing Data from child app back to parent app.
1. Judging from the error you encountered, it appears that you are assigning "app.UITable." (with a trailing dot) to the variabl...
Passing Data from child app back to parent app.
1. Judging from the error you encountered, it appears that you are assigning "app.UITable." (with a trailing dot) to the variabl...
4 months 前 | 0
| 已接受
已回答
Is it possible for Simulink to support m7 cortex for NXP and requires an third party tool?
When using 32‑bit single precision, ARM Cortex‑M7 generally offers a significant performance boost over Cortex‑M4. The M4 core d...
Is it possible for Simulink to support m7 cortex for NXP and requires an third party tool?
When using 32‑bit single precision, ARM Cortex‑M7 generally offers a significant performance boost over Cortex‑M4. The M4 core d...
4 months 前 | 0
