Main Content

Simulation 3D Ultrasonic Sensor

Ultrasonic sensor model in 3D simulation environment

Since R2022b

  • Simulation 3d Ultrasonic Sensor Block

Libraries:
Automated Driving Toolbox / Simulation 3D
Aerospace Blockset / Animation / Simulation 3D
UAV Toolbox / Simulation 3D
Simulink 3D Animation / Simulation 3D / Sensors

Description

Note

Simulating models with the Simulation 3D Ultrasonic Sensor block requires Simulink® 3D Animation™.

The Simulation 3D Ultrasonic Sensor block generates detections from range measurements taken by an ultrasonic sensor mounted on an ego vehicle in a 3D simulation environment rendered using the Unreal Engine® from Epic Games®. The block calculates range measurements based on the distance between the sensor and the closest point on the detected object.

If you set Sample time to -1, the block uses the sample time specified in the Simulation 3D Scene Configuration block. To use this sensor, you must include a Simulation 3D Scene Configuration block in your model.

Tip

The Simulation 3D Scene Configuration block must execute before the Simulation 3D Ultrasonic Sensor block. That way, the Unreal Engine 3D visualization environment prepares the data before the Simulation 3D Ultrasonic Sensor block receives it. To check the block execution order, right-click the blocks and select Properties. On the General tab, confirm these Priority settings:

  • Simulation 3D Scene Configuration0

  • Simulation 3D Ultrasonic Sensor1

For more information about execution order, see How Unreal Engine Simulation for Automated Driving Works.

Examples

Ports

Output

expand all

Object detections, returned as a Simulink bus containing a MATLAB® structure. For more details about buses, see Create Nonvirtual Buses (Simulink).

You can pass object detections from these sensors and other sensors to a tracker, such as a Multi-Object Tracker block, and generate tracks.

The structure contains these fields.

FieldDescription
TimeMeasurement time
MeasurementDistance measurement to the closest object
MeasurementNoiseMeasurement noise covariance matrix
SensorIndexUnique ID of the sensor
ObjectClassIDObject classification
ObjectAttributesAdditional information passed to tracker
MeasurementParametersParameters used by initialization functions of nonlinear Kalman tracking filters

This table describes the additional information in the ObjectAttributes field.

ObjectAttributes

AttributeDefinition
TargetIndexIdentifier of the actor that generated the detection, returned as the value of the ActorID property of the actor. For false alarms, this value is negative.
PointOnTargetCoordinate of the point on the detected object that the sensor used to compute the distance measurement, in the vehicle coordinate system. Use this for visualizing detections in the Bird's-Eye Scope app.

For MeasurementParameters, the measurements are relative to the parent frame. The parent frame is the ego vehicle body.

MeasurementParameters

ParameterDefinition
Frame Enumerated type indicating the frame used to report measurements. If the detections come from an Ultrasonic Detection Generator block, Simulation 3D Ultrasonic Sensor reports them in spherical coordinates, and the value of Frame is 'spherical'.
OriginPosition3-D vector offset of the sensor origin from the parent frame origin.
OriginVelocityVelocity of the sensor coordinate system with respect to the parent frame.
IsParentToChildLogical scalar indicating if Orientation performs a frame rotation from the parent coordinate frame to the child coordinate frame. When IsParentToChild is false, then Orientation performs a frame rotation from the child coordinate frame to the parent coordinate frame.
HasAzimuthIndicates whether measurements contain azimuth components.
HasRangeIndicates whether measurements contain range components. Always true for Ultrasonic Detection Generator.
HasElevationIndicates whether measurements contain elevation components. Always false for Ultrasonic Detection Generator.
HasVelocityIndicates whether measurements contain velocity or range rate components. Always false for Ultrasonic Detection Generator.
FieldOfView2-D vector containing the azimuth and elevation field-of-view values of the sensor.

Dependencies

To enable this port, select the Use bus output parameter.

Detectable object present in the sensor field-of-view, returned as a Boolean scalar. An object is considered detectable if its closest distance to the sensor is greater than the minimum detection-only range specified in the Detection ranges (m) parameter.

Dependencies

To enable this port, clear the Use bus output parameter.

Range measurement is possible for an object present in the sensor field-of-view, returned as a Boolean scalar. For any object in the field-of-view, range measurement is possible if its closest distance to the sensor is greater than the minimum-distance range specified in the Detection ranges (m) parameter.

Dependencies

To enable this output port, clear the Use bus output parameter.

Distance measurement to the closest object, returned as a nonnegative scalar, in meters.

Dependencies

To enable this port, clear the Use bus output parameter.

Sensor location along the X-axis, Y-axis, and Z-axis of the scene. The Translation values are in the world coordinates of the scene. In this coordinate system, the Z-axis points up from the ground. Units are in meters.

Dependencies

To enable this port, on the Ground Truth tab, select Output location (m) and orientation (rad).

Data Types: double

Roll, pitch, and yaw sensor orientation about the X-axis, Y-axis, and Z-axis of the scene. The Rotation values are in the world coordinates of the scene. These values are positive in the clockwise direction when looking in the positive directions of these axes. Units are in radians.

Dependencies

To enable this port, on the Ground Truth tab, select Output location (m) and orientation (rad).

Data Types: double

Parameters

expand all

Mounting

Specify the unique identifier of the sensor. In a multisensor system, the sensor identifier enables you to distinguish between sensors. When you add a new sensor block to your model, the Sensor identifier of that block is N + 1, where N is the highest Sensor identifier value among the existing sensor blocks in the model.

Example: 2

Name of the parent to which the sensor is mounted, specified as Scene Origin or as the name of a vehicle in your model. The vehicle names that you can select correspond to the Name parameters of the simulation 3D vehicle blocks in your model. If you select Scene Origin, the block places a sensor at the scene origin.

Example: SimulinkVehicle1

Sensor mounting location.

  • When Parent name is Scene Origin, the block mounts the sensor to the origin of the scene. You can set the Mounting location to Origin only. During simulation, the sensor remains stationary.

  • When Parent name is the name of a vehicle, the block mounts the sensor to one of the predefined mounting locations described in the table. During simulation, the sensor travels with the vehicle.

Vehicle Mounting LocationDescriptionOrientation Relative to Vehicle Origin [Roll, Pitch, Yaw] (deg)
Origin

Forward-facing sensor mounted to the vehicle origin, which is on the ground and at the geometric center of the vehicle (see Coordinate Systems for Unreal Engine Simulation in Automated Driving Toolbox)

Vehicle with sensor mounted at origin

[0, 0, 0]

Front bumper

Front center

Forward-facing sensor mounted to the front bumper

Vehicle with sensor mounted at front bumper

[0, 0, 0]

Rear bumper

Rear center

Backward-facing sensor mounted to the rear bumper

Vehicle with sensor mounted at rear bumper

[0, 0, 180]
Right mirror

Downward-facing sensor mounted to the right side-view mirror

Vehicle with sensor mounted at right side-view mirror

[0, –90, 0]
Left mirror

Downward-facing sensor mounted to the left side-view mirror

Vehicle with sensor mounted at left side-view mirror

[0, –90, 0]
Rearview mirror

Forward-facing sensor mounted to the rearview mirror, inside the vehicle

Vehicle with sensor mounted at rearview mirror

[0, 0, 0]
Hood center

Forward-facing sensor mounted to the center of the hood

Vehicle with sensor mounted at hood center

[0, 0, 0]
Roof center

Forward-facing sensor mounted to the center of the roof

Vehicle with sensor mounted at roof center

[0, 0, 0]

Roll, pitch, and yaw are clockwise-positive when looking in the positive direction of the X-axis, Y-axis, and Z-axis, respectively. When looking at a vehicle from above, the yaw angle (the orientation angle) is counterclockwise-positive because you are looking in the negative direction of the axis.

The X-Y-Z mounting location of the sensor relative to the vehicle depends on the vehicle type. To specify the vehicle type, use the Type parameter of the Simulation 3D Vehicle with Ground Following to which you mount the sensor. To obtain the X-Y-Z mounting locations for a vehicle type, see the reference page for that vehicle.

To determine the location of the sensor in world coordinates, open the sensor block. Then, on the Ground Truth tab, select the Output location (m) and orientation (rad) parameter and inspect the data from the Translation output port.

Select this parameter to specify an offset from the mounting location by using the Relative translation [X, Y, Z] (m) and Relative rotation [Roll, Pitch, Yaw] (deg) parameters.

Translation offset relative to the mounting location of the sensor, specified as a real-valued 1-by-3 vector of the form [X, Y, Z]. Units are in meters.

If you mount the sensor to a vehicle by setting Parent name to the name of that vehicle, then X, Y, and Z are in the vehicle coordinate system, where:

  • The X-axis points forward from the vehicle.

  • The Y-axis points to the left of the vehicle, as viewed when looking in the forward direction of the vehicle.

  • The Z-axis points up.

The origin is the mounting location specified in the Mounting location parameter. This origin is different from the vehicle origin, which is the geometric center of the vehicle.

If you mount the sensor to the scene origin by setting Parent name to Scene Origin, then X, Y, and Z are in the world coordinates of the scene.

For more details about the vehicle and world coordinate systems, see Coordinate Systems for Unreal Engine Simulation in Automated Driving Toolbox.

Example: [0,0,0.01]

Dependencies

To enable this parameter, select Specify offset.

Rotational offset relative to the mounting location of the sensor, specified as a real-valued 1-by-3 vector of the form [Roll, Pitch, Yaw]. Roll, pitch, and yaw are the angles of rotation about the X-, Y-, and Z-axes, respectively. Units are in degrees.

If you mount the sensor to a vehicle by setting Parent name to the name of that vehicle, then X, Y, and Z are in the vehicle coordinate system, where:

  • The X-axis points forward from the vehicle.

  • The Y-axis points to the left of the vehicle, as viewed when looking in the forward direction of the vehicle.

  • The Z-axis points up.

  • Roll, pitch, and yaw are clockwise-positive when looking in the forward direction of the X-axis, Y-axis, and Z-axis, respectively. If you view a scene from a 2D top-down perspective, then the yaw angle (also called the orientation angle) is counterclockwise-positive because you are viewing the scene in the negative direction of the Z-axis.

The origin is the mounting location specified in the Mounting location parameter. This origin is different from the vehicle origin, which is the geometric center of the vehicle.

If you mount the sensor to the scene origin by setting Parent name to Scene Origin, then X, Y, and Z are in the world coordinates of the scene.

For more details about the vehicle and world coordinate systems, see Coordinate Systems for Unreal Engine Simulation in Automated Driving Toolbox.

Example: [0,0,10]

Dependencies

To enable this parameter, select Specify offset.

Sample time of the block, in seconds, specified as a positive scalar. The 3D simulation environment frame rate is the inverse of the sample time.

If you set the sample time to -1, the block inherits its sample time from the Simulation 3D Scene Configuration block.

Sensor Parameters

Detection range vector of the ultrasonic sensor, specified as a 1-by-3 nonnegative real-valued vector of the form [minDetOnlyRange minDistRange maxDistRange], where minDetOnlyRange < minDistRange < maxDistRange. Units are in meters. These values determine the detections and distance values returned by the ultrasonic sensor.

  • When the detected object is at a distance between minDistRange and maxDistRange, the sensor returns a positive distance value.

  • When the detected object is at a distance between minDetOnlyRange and minDistRange, the sensor detects the object, but cannot determine the distance and returns a value of 0.

  • When the object is at a distance below minDetOnlyRange or above maxDistRange, the sensor returns an empty cell array.

Horizontal field of view of ultrasonic sensor, specified as a positive real scalar. This field of view defines the total angular extent spanned by the sensor in the horizontal direction. You must specify the horizontal field of view horizontalFOV in the range (0, 180). Units are in degrees.

Vertical field of view of ultrasonic sensor, specified as a positive real scalar. This field of view defines the total angular extent spanned by the sensor in the vertical direction. You must specify the vertical field of view in the range (0, 180). Units are in degrees.

Select to output detections as a bus signal using the Detections port. Clear Use bus output to instead enable the Has object, Has range, and Range output ports.

Ground Truth

Select this parameter to output the translation and rotation of the sensor at the Translation and Rotation ports, respectively.

Version History

Introduced in R2022b

expand all