建模
为硬件连接准备模型,添加模块以支持硬件协议
为硬件连接准备 Simulink® 模型,添加模块以支持硬件协议、体现各种应用的示例。
模块
ALSA Audio Capture | Capture audio from sound card using ALSA |
ALSA Audio Playback | Send audio to sound card for playback using ALSA |
Analog Input | Measure voltage of analog input pin |
GPIO Read | Read logical value of GPIO pin configured as input |
GPIO Write | Write logical value of GPIO pin configured as output |
LED | Illuminate built-in LED |
PWM | Vary power output of digital output pin |
SDL Video Display | Display video using SDL |
ThingSpeak Write | Publish data to Internet of Things using ThingSpeak |
UDP Receive | Receive UDP packet |
UDP Send | Send UDP message |
V4L2 Video Capture | Capture video from USB camera using V4L2 |
主题
- Model Configuration Parameters for BeagleBone Black Hardware Board
Parameter and configuration options for creating and running applications on an BeagleBone® Black hardware board.
- Open Block Library for BeagleBone Black Hardware
Locate the block library for BeagleBone Black hardware.
- Publish Data to Internet of Things Using ThingSpeak
Publish Data to Internet of Things using ThingSpeak™.
教程
- Get Started with Embedded Coder Support Package for BeagleBone Black Hardware
This example shows you how to use Embedded Coder® Support Package for BeagleBone® Black Hardware to run a Simulink® model on BeagleBone Black hardware.