Acquire I/Q Data from Vector Signal Transceiver Using NI-RFSA Instrument Driver

Open Live Script

This example shows how to connect to a simulated NI™ PXIe-5841 Vector Signal Transceiver (VST) and acquire a finite amount of I/Q data from it.

Connect to Instrument

Connect to a simulated VST instrument using the ividev function. For this example, specify the driver name as niRFSA, the resource name as PXI1Slot2, and the IVI driver setup name-value argument as Model:5841.

If you do not know your instrument's resource name, you can identify it from the NI Measurement and Automation Explorer (NI MAX) software. Alternatively, you can leave the resource name unspecified ("") for simulated hardware. The driver setup is also optional. If you do not specify a name-value argument for the driver setup, ividev uses default setup values. For more information about default argument values, see ividev.

dev = ividev("niRFSA", "PXI1Slot2", Simulate=true, DriverSetup="Model:5841")

dev = 
  niRFSA with properties:

                    Model: "NI PXIe-5841" 
             Manufacturer: "National Instruments" 
             SerialNumber: "" 
             ResourceName: "PXI1Slot2" 
             VendorDriver: "niRFSA" 
                 Simulate: 1 

               ChannelIDs: "0" 
          FIFOEndpointIDs: "FIFOEndpoint0" 
            UserSourceIDs: "usersource0" 

                 Vertical: [1x1 Vertical] 
               SignalPath: [1x1 SignalPath] 
              Acquisition: [1x1 Acquisition] 
                 Clocking: [1x1 Clocking] 
                 Triggers: [1x1 Triggers] 
                   Events: [1x1 Events] 
    DeviceCharacteristics: [1x1 DeviceCharacteristics] 
               PeerToPeer: [1x1 PeerToPeer] 
        ConfigurationList: [1x1 ConfigurationList] 
    InherentIVIAttributes: [1x1 InherentIVIAttributes] 
              Deembedding: [1x1 Deembedding] 
          SelfCalibration: [1x1 SelfCalibration] 
       FactoryCalibration: [1x1 FactoryCalibration] 
        ExternalAlignment: [1x1 ExternalAlignment] 
           DeviceSpecific: [1x1 DeviceSpecific] 
          AcquisitionType: IQ 

Show all functions

Configure Acquisition Properties

Configure the VST to acquire IQ data on channel "0". For single channel devices, you can leave the channel specified (""). Set the following parameters to the specified value:

Reference clock — onboard clock
Acquisition type — I/Q data
The reference level — 0 dB
Carrier frequency — 1 GHz
Acquisition rate — 1 MHz

Explore different options by using tab completion in the Live Editor.

ch = "0";
configureRefClock(dev, "OnboardClock", 1e7);
configureAcquisitionType(dev, "IQ");
configureReferenceLevel(dev, ch, 0);
configureIQCarrierFrequency(dev, ch, 1e9);
configureIQRate(dev, ch, 1e6);

Acquire Finite Number of Samples

Acquire 1000 samples of I/Q data from channel "0" and additional information about the acquired waveform.

finiteSamples = true;
numSamples = 1000;
configureNumberOfSamples(dev, ch, finiteSamples, numSamples);
[data, waveformInfo] = readIQSingleRecordComplexF64(dev, ch, 10, numSamples);

Extract Waveform Information

Extract information related to the plot from the waveform information.

t0 = waveformInfo.relativeInitialX;
tincr = waveformInfo.xIncrement;
n = double(waveformInfo.actualSamples);
t = t0 + tincr.*(0:n-1);

Plot Acquired Samples

Display the I data and Q data in related subplots and indicate the average power across a simulated load of 50 ohms.

R = 50; % ohms
dBm = 10*log(1000*abs(data)/(2*R));

subplot(2,1,1)
plot(t, real(data))
title(compose("Average power = %.2f dBm", mean(dBm)));
ylabel("I data")
subplot(2,1,2)
plot(t, imag(data))
ylabel("Q data")
xlabel("time(s)")

Clean Up

Disconnect and clear the ividev object from the workspace.

clear dev