EtherCAT Sync SDO Download
将数据同步传输至由服务数据对象表示的下级设备
库:
Simulink Real-Time /
EtherCAT
描述
EtherCAT Sync SDO Download 模块根据指定 EtherCAT® 从属设备中的 Index 值选择一个 CANopen 寄存器，并发送写入请求。然后，该模块会一直等待，直到收到响应或超时结束为止。
对一项操作的响应需要主任务采样时间的几个时钟周期。将同步模块的采样时间设置为慢于主任务的采样时间。
示例
EtherCAT Protocol with Beckhoff Analog IO Subordinate Devices EL3062 and EL4002
Communicate with EtherCAT devices using the Beckhoff® analog I/O terminals EL3062 and EL4002.
EtherCAT Protocol with Beckhoff Digital IO Subordinate Devices EL1004 and EL2004
Communicate with EtherCAT devices using the Beckhoff digital I/O terminals EL1004 and EL2004.
EtherCAT Protocol Sequenced Writing SoE Subordinate Device Configuration Variables
Use SoE blocks and a simple state machine to write configuration values to variables that can only be written before going to EtherCAT Op state.
EtherCAT Protocol Sequenced Writing CoE Subordinate Device Configuration Variables
Use CoE blocks and a simple state machine to write configuration values to variables that can only be written before going to EtherCAT Op state.
EtherCAT Protocol Detect Network Failure and Reset
Use the EtherCAT Notifications block to detect a failure in the connected network and to restart the network when the failure is corrected.
EtherCAT Protocol Motor Velocity Control with Accelnet Drive
Control the velocity of a motor by using EtherCAT communication.
EtherCAT Protocol Motor Position Control with Accelnet Drive
Control the position of a motor by using EtherCAT communication.
为 EtherCAT 设备生成 ENI 文件
生成 EtherCAT 网络信息 (ENI) 文件，以便在 Simulink® Real-Time™ 中与 EtherCAT 设备配合使用。
端口
输入
输出
参数
扩展功能
版本历史记录
在 R2020b 中推出
