Check Performance in the Models Pane

After training a model in Classification Learner, check the Models pane to see which model has the best overall accuracy in percent. The best Accuracy (Validation) score is highlighted in a box. This score is the validation accuracy. The validation accuracy score estimates a model's performance on new data compared to the training data. Use the score to help you choose the best model.

The best overall score might not be the best model for your goal. A model with a slightly lower overall accuracy might be the best classifier for your goal. For example, false positives in a particular class might be important to you. You might want to exclude some predictors where data collection is expensive or difficult.

To find out how the classifier performed in each class, examine the confusion matrix.

View Model Metrics in Summary Tab and Models Pane

You can view model metrics in the model Summary tab and the Models pane, and use the metrics to assess and compare models. Alternatively, you can use the compare results plot and the Results Table tab to compare models. For more information, see View Model Information and Results in Compare Results Plot Compare Model Information and Results in Table View.

The Training Results and Additional Training Results metrics are calculated on the validation set. The Test Results and Additional Test Results metrics, if displayed, are calculated on a test set. For more information, see Evaluate Test Set Model Performance.

The app provides three additional model metrics: precision, recall, and F₁ score. The metrics are indicators of how frequently a model makes correct predictions (true positives and true negatives) and incorrect predictions (false positives and false negatives) for validation or test data with known classes. The metrics are available on a per-class basis, or averaged over all classes using one of these types of average: macro, micro, or weighted. For examples of plots that use these metrics, see Check ROC Curve and Check Precision-Recall Curve.

You can sort models in the Models pane according to accuracy, total cost, error rate, macro average precision, macro average recall, or macro average F₁ score. To select a metric for model sorting, use the Sort by list at the top of the Models pane. Not all metrics are available for sorting in the Models pane. You can sort models by other metrics in the Results Table (see Compare Model Information and Results in Table View).

You can also delete models listed in the Models pane. Select the model you want to delete and click the Delete selected model button in the upper right of the pane, or right-click the model and select Delete. You cannot delete the last remaining model in the Models pane.

Compare Model Information and Results in Table View

Rather than using the Summary tab or the Models pane to compare model metrics, you can use a table of results. On the Learn tab, in the Plots and Results section, click Results Table. In the Results Table tab, you can sort models by their training and test results, as well as by their options (such as model type, selected features, PCA, and so on). For example, to sort models by validation accuracy, click the sorting arrows in the Accuracy (Validation) column header. A down arrow indicates that models are sorted from highest accuracy to lowest accuracy.

To view more table column options, click the "Select columns to display" button at the top right of the table. In the Select Columns to Display dialog box, check the boxes for the columns you want to display in the results table. Newly selected columns are appended to the table on the right.

Within the results table, you can manually drag table columns so that they appear in your preferred order.

You can mark some models as favorites by using the Favorite column. The app keeps the selection of favorite models consistent between the results table and the Models pane. Unlike other columns, the Favorite and Model Number columns cannot be removed from the table.

To remove a row from the table, right-click any entry within the row and click Hide row (or Hide selected row(s) if the row is highlighted). To remove consecutive rows, click any entry within the first row you want to remove, press Shift, and click any entry within the last row you want to remove. Then, right-click one of the highlighted entries and click Hide selected row(s). To restore all removed rows, right-click any entry in the table and click Show all rows. The restored rows are appended to the bottom of the table.

To export the information in the table, use one of the export buttons at the top right of the table. Choose between exporting the table to the workspace or to a file. The exported table includes only the displayed rows and columns.

View Model Information and Results in Compare Results Plot

You can view model information and results in a compare results plot. On the Learn or Test tab, in the Plots and Results section, click Compare Results. Alternatively, click the Plot Results button in the Results Table tab. The plot shows a bar chart of validation accuracy for the models, ordered from highest to lowest accuracy value. You can sort the models by other training and test results using the Sort by list under Sort Data. To group models of the same type, select Group by model type. To assign the same color to all model types, clear Color by model type.

Select model types to display using the check boxes under Select. Hide a displayed model by right-clicking a bar in the plot and selecting Hide Model.

You can also select and filter the displayed models by clicking the Filter button under Filter and Group. In the Filter and Select Models dialog box, click Select Metrics and select the metrics to display in the table of models at the top of the dialog box. Within the table, you can drag the table columns so that they appear in your preferred order. Click the sorting arrows in the table headers to sort the table. To filter models by metric value, first select a metric in the Filter by column. Then select a condition in the Filter Models table, enter a value in the Value field, and click Apply Filter(s). The app updates the selections in the table of models. You can specify additional conditions by clicking the Add Filter button. Click OK to display the updated plot.

Select other metrics to plot in the X and Y lists under Plot Data. If you do not select Model Number for X or Y, the app displays a scatter plot.

To export a compare results plot to a figure, see Export Plots in Classification Learner App.

To export the results table to the workspace, click Export Plot and select Export Plot Data. In the Export Result Metrics Plot Data dialog box, edit the name of the exported variable, if necessary, and click OK. The app creates a structure array that contains the results table.

Plot Classifier Results

Use a scatter plot to examine the classifier results. To view the scatter plot for a model, select the model in the Models pane. On the Learn tab, in the Plots and Results section, click the arrow to open the gallery, and then click Scatter in the Validation Results group. After you train a classifier, the scatter plot switches from displaying the data to showing model predictions. If you are using holdout or cross-validation, then these predictions are the predictions on the held-out (validation) observations. In other words, the software obtains each prediction by using a model that was trained without the corresponding observation.

To investigate your results, use the controls on the right. You can:

See also Investigate Features in the Scatter Plot.

To export the scatter plots you create in the app to figures, see Export Plots in Classification Learner App.

Check Performance Per Class in the Confusion Matrix

Use the confusion matrix plot to understand how the currently selected classifier performed in each class. After you train a classification model, the app automatically opens the confusion matrix for that model. If you train an "All" model, the app opens the confusion matrix for the first model only. To view the confusion matrix for another model, select the model in the Models pane. On the Learn tab, in the Plots and Results section, click the arrow to open the gallery, and then click Confusion Matrix (Validation) in the Validation Results group. The confusion matrix helps you identify the areas where the classifier performed poorly.

When you open the plot, the rows show the true class, and the columns show the predicted class. If you are using holdout or cross-validation, then the confusion matrix is calculated using the predictions on the held-out (validation) observations. The diagonal cells show where the true class and predicted class match. If these diagonal cells are blue, the classifier has classified observations of this true class correctly.

The default view shows the number of observations in each cell.

To see how the classifier performed per class, under Plot, select the True Positive Rates (TPR), False Negative Rates (FNR) option. The TPR is the proportion of correctly classified observations per true class. The FNR is the proportion of incorrectly classified observations per true class. The plot shows summaries per true class in the last two columns on the right.

In this example, which uses the carbig data set, the fifth row from the top shows all cars with the true class Japan. The columns show the predicted classes. Of the cars from Japan, 77.2% are correctly classified, so 77.2% is the true positive rate for correctly classified points in this class, shown in the blue cell in the TPR column.

The other cars in the Japan row are misclassified: 5.1% of the cars are incorrectly classified as from Germany, 5.1% are classified as from Sweden, and 12.7% are classified as from the USA. The false negative rate for incorrectly classified points in this class is 22.8%, shown in the orange cell in the FNR column.

If you want to see numbers of observations (cars, in this example) instead of percentages, under Plot, select Number of observations.

If false positives are important in your classification problem, plot results per predicted class (instead of true class) to investigate false discovery rates. To see results per predicted class, under Plot, select the Positive Predictive Values (PPV), False Discovery Rates (FDR) option. The PPV is the proportion of correctly classified observations per predicted class. The FDR is the proportion of incorrectly classified observations per predicted class. With this option selected, the confusion matrix now includes summary rows below the table. Positive predictive values are shown in blue for the correctly predicted points in each class, and false discovery rates are shown in orange for the incorrectly predicted points in each class.

If you decide there are too many misclassified points in the classes of interest, try changing classifier settings or feature selection to search for a better model.

To export the confusion matrix plots you create in the app to figures, see Export Plots in Classification Learner App.

To export the confusion matrix to the workspace, click Export Plot and select Export Plot Data. In the Export Confusion Matrix Plot Data dialog box, edit the name of the exported variable, if necessary, and click OK. The app creates a structure array that contains the confusion matrix and the class labels.

Check ROC Curve

View a receiver operating characteristic (ROC) curve after training a model. In the Plots and Results section, click the arrow to open the gallery, and then click ROC Curve (Validation) in the Validation Results group. The app creates a ROC curve by using the rocmetrics function.

The ROC curve shows the true positive rate (TPR) versus the false positive rate (FPR) for different thresholds of classification scores, computed by the currently selected classifier. The Model Operating Point shows the false positive rate and true positive rate corresponding to the threshold used by the classifier to classify an observation. For example, a false positive rate of 0.1 indicates that the classifier incorrectly assigns 10% of the negative class observations to the positive class. A true positive rate of 0.85 indicates that the classifier correctly assigns 85% of the positive class observations to the positive class.

The AUC (area under curve) value corresponds to the integral of a ROC curve (TPR values) with respect to FPR from FPR = 0 to FPR = 1. The AUC value is a measure of the overall quality of the classifier. The AUC values are in the range 0 to 1, and larger AUC values indicate better classifier performance. Compare classes and trained models to see if they perform differently in the ROC curve.

You can create a ROC curve for a specific class using the Show check boxes under Per-class curves. However, you do not need to examine ROC curves for both classes in a binary classification problem. The two ROC curves are symmetric, and the AUC values are identical. A TPR of one class is a true negative rate (TNR) of the other class, and TNR is 1 – FPR. Therefore, a plot of TPR versus FPR for one class is the same as a plot of 1 – FPR versus 1 – TPR for the other class.

For a multiclass classifier, the app formulates a set of one-versus-all binary classification problems to have one binary problem for each class, and finds a ROC curve for each class using the corresponding binary problem. Each binary problem assumes that one class is positive and the rest are negative. The model operating point on the plot shows the performance of the classifier for each class in its one-versus-all binary problem.

You can also plot average ROC curves using the Show check boxes under Average curves. For a description of the types of average, see View Model Metrics in Summary Tab and Models Pane.

For more information, see rocmetrics and ROC Curve and Performance Metrics.

To export the ROC curve plots you create in the app to figures, see Export Plots in Classification Learner App.

To export the ROC curve results to the workspace, click Export Plot and select Export Plot Data. In the Export ROC Curve Plot Data dialog box, edit the name of the exported variable, if necessary, and click OK. The app creates a structure array that contains the rocmetrics object.

Check Precision-Recall Curve

View a precision-recall curve after training a model. In the Plots and Results section, click the arrow to open the gallery, and then click Precision-Recall Curve (Validation) in the Validation Results group. The app creates a precision-recall curve by using the rocmetrics function.

The precision-recall curve shows the positive predictive value (precision) versus the true positive rate (recall) for different thresholds of classification scores, computed by the currently selected classifier. The Model Operating Point shows the precision and true positive rate (TPR) corresponding to the threshold used by the classifier to classify an observation. For example, a precision of 0.85 indicates that 85% of observations assigned as positive are true positives. A true positive rate of 0.85 indicates that the classifier correctly assigns 85% of the positive class observations to the positive class.

The PR-AUC (area under curve) value is a measure of the overall quality of the classifier. The PR-AUC values are in the range 0 to 1, and higher PR-AUC values generally indicate both high precision and high recall (see auc). Compare classes and trained models to see if they perform differently in the precision-recall curve.

You can create a precision-recall curve for a specific class using the Show check boxes under Per-class curves. For a multiclass classifier, the app formulates a set of one-versus-all binary classification problems to have one binary problem for each class, and finds a precision-recall curve for each class using the corresponding binary problem. Each binary problem assumes that one class is positive and the rest are negative. The model operating point on the plot shows the performance of the classifier for each class in its one-versus-all binary problem.

You can also plot average precision-recall curves using the Show check boxes under Average curves. For a description of the types of average, see View Model Metrics in Summary Tab and Models Pane.

To export a precision-recall curve plot to a figure, see Export Plots in Classification Learner App.

To export the precision-recall curve results to the workspace, click Export Plot and select Export Plot Data. In the Export Precision Recall Curve Plot Data dialog box, edit the name of the exported variable, if necessary, and click OK. The app creates a structure array that contains the rocmetrics object.

Compare Model Plots by Changing Layout

Visualize the results of models trained in Classification Learner by using the plot options in the Plots and Results section of the Learn tab. You can rearrange the layout of the plots to compare results across multiple models: use the options in the Layout button, drag plots, or select the options provided by the Document Actions button located to the right of the model plot tabs.

For example, after training two models in Classification Learner, display a plot for each model and change the plot layout to compare the plots by using one of these procedures:

Note that you can click the Hide plot options button at the top right of the plots to make more room for the plots.

Evaluate Test Set Model Performance

After training a model in Classification Learner, you can evaluate the model performance on a test set in the app. This process allows you to check whether the validation accuracy provides a good estimate for the model performance on new data.

For an example, see Check Classifier Performance Using Test Set in Classification Learner App. For an example that uses test set metrics in a hyperparameter optimization workflow, see Train Classifier Using Hyperparameter Optimization in Classification Learner App.