Main Content

edge

Classification edge for naive Bayes classifier

collapse all in page

Syntax

e = edge(Mdl,tbl,ResponseVarName)
e = edge(Mdl,tbl,Y)
e = edge(Mdl,X,Y)
e = edge(___,'Weights',Weights)

Description

e = edge(Mdl,tbl,ResponseVarName) returns the Classification Edge (e) for the naive Bayes classifier Mdl using the predictor data in table tbl and the class labels in tbl.ResponseVarName.

The classification edge (e) is a scalar value that represents the weighted mean of the Classification Margins.

e = edge(Mdl,tbl,Y) returns the classification edge for Mdl using the predictor data in table tbl and the class labels in vector Y.

e = edge(Mdl,X,Y) returns the classification edge for Mdl using the predictor data in matrix X and the class labels in Y.

example

e = edge(___,'Weights',Weights) returns the classification edge with additional observation weights supplied in Weights using any of the input argument combinations in the previous syntaxes.

example

Examples

collapse all

Open Live Script

Estimate the test sample edge (the classification margin average) of a naive Bayes classifier. The test sample edge is the average test sample difference between the estimated posterior probability for the predicted class and the posterior probability for the class with the next lowest posterior probability.

Load the fisheriris data set. Create X as a numeric matrix that contains four measurements for 150 irises. Create Y as a cell array of character vectors that contains the corresponding iris species.

load fisheriris
X = meas;
Y = species;
rng('default')  % for reproducibility

Randomly partition observations into a training set and a test set with stratification, using the class information in Y. Specify a 30% holdout sample for testing.

cv = cvpartition(Y,'HoldOut',0.30);

Extract the training and test indices.

trainInds = training(cv);
testInds = test(cv);

Specify the training and test data sets.

XTrain = X(trainInds,:);
YTrain = Y(trainInds);
XTest = X(testInds,:);
YTest = Y(testInds);

Train a naive Bayes classifier using the predictors XTrain and class labels YTrain. A recommended practice is to specify the class names. fitcnb assumes that each predictor is conditionally and normally distributed.

Mdl = fitcnb(XTrain,YTrain,'ClassNames',{'setosa','versicolor','virginica'})
Mdl = 
  ClassificationNaiveBayes
              ResponseName: 'Y'
     CategoricalPredictors: []
                ClassNames: {'setosa'  'versicolor'  'virginica'}
            ScoreTransform: 'none'
           NumObservations: 105
         DistributionNames: {'normal'  'normal'  'normal'  'normal'}
    DistributionParameters: {3x4 cell}

Mdl is a trained ClassificationNaiveBayes classifier.

Estimate the test sample edge.

e = edge(Mdl,XTest,YTest)
e = 
0.8658

The margin average is approximately 0.87. This result suggests that the classifier labels predictors with high confidence.

Open Live Script

Estimate the test sample weighted edge (the weighted margin average) of a naive Bayes classifier. The test sample edge is the average test sample difference between the estimated posterior probability for the predicted class and the posterior probability for the class with the next lowest posterior probability. The weighted sample edge estimates the margin average when the software assigns a weight to each observation.

Load the fisheriris data set. Create X as a numeric matrix that contains four measurements for 150 irises. Create Y as a cell array of character vectors that contains the corresponding iris species.

load fisheriris
X = meas;
Y = species;
rng('default')  % for reproducibility

Suppose that some of the measurements are lower quality because they were measured with older technology. To simulate this effect, add noise to a random subset of 20 measurements.

idx = randperm(size(X,1),20);
X(idx,:) = X(idx,:) + 2*randn(20,size(X,2));

Randomly partition observations into a training set and a test set with stratification, using the class information in Y. Specify a 30% holdout sample for testing.

cv = cvpartition(Y,'HoldOut',0.30);

Extract the training and test indices.

trainInds = training(cv);
testInds = test(cv);

Specify the training and test data sets.

XTrain = X(trainInds,:);
YTrain = Y(trainInds);
XTest = X(testInds,:);
YTest = Y(testInds);

Train a naive Bayes classifier using the predictors XTrain and class labels YTrain. A recommended practice is to specify the class names. fitcnb assumes that each predictor is conditionally and normally distributed.

Mdl = fitcnb(XTrain,YTrain,'ClassNames',{'setosa','versicolor','virginica'});

Mdl is a trained ClassificationNaiveBayes classifier.

Estimate the test sample edge.

e = edge(Mdl,XTest,YTest)
e = 
0.5920

The average margin is approximately 0.59.

One way to reduce the effect of the noisy measurements is to assign them less weight than the other observations. Define a weight vector that gives the better quality observations twice the weight of the other observations.

n = size(X,1);
weights = ones(size(X,1),1);
weights(idx) = 0.5;
weightsTrain = weights(trainInds);
weightsTest = weights(testInds);

Train a naive Bayes classifier using the predictors XTrain, class labels YTrain, and weights weightsTrain.

Mdl_W = fitcnb(XTrain,YTrain,'Weights',weightsTrain,...
    'ClassNames',{'setosa','versicolor','virginica'});

Mdl_W is a trained ClassificationNaiveBayes classifier.

Estimate the test sample weighted edge using the weighting scheme.

e_W = edge(Mdl_W,XTest,YTest,'Weights',weightsTest)
e_W = 
0.6816

The weighted average margin is approximately 0.69. This result indicates that, on average, the weighted classifier labels predictors with higher confidence than the noise corrupted predictors.

Open Live Script

The classifier edge measures the average of the classifier margins. One way to perform feature selection is to compare test sample edges from multiple models. Based solely on this criterion, the classifier with the highest edge is the best classifier.

Load the ionosphere data set. Remove the first two predictors for stability.

load ionosphere
X = X(:,3:end);
rng('default')  % for reproducibility

Randomly partition observations into a training set and a test set with stratification, using the class information in Y. Specify a 30% holdout sample for testing.

cv = cvpartition(Y,'Holdout',0.30);

Extract the training and test indices.

trainInds = training(cv);
testInds = test(cv);

Specify the training and test data sets.

XTrain = X(trainInds,:);
YTrain = Y(trainInds);
XTest = X(testInds,:);
YTest = Y(testInds);

Define these two training data sets:

  • fullXTrain contains all predictors.

  • partXTrain contains the 10 most important predictors.

fullXTrain = XTrain;
idx = fscmrmr(XTrain,YTrain);
partXTrain = XTrain(:,idx(1:10));

Train a naive Bayes classifier for each predictor set.

fullMdl = fitcnb(fullXTrain,YTrain);
partMdl = fitcnb(partXTrain,YTrain);

fullMdl and partMdl are trained ClassificationNaiveBayes classifiers.

Estimate the test sample edge for each classifier.

fullEdge = edge(fullMdl,XTest,YTest)
fullEdge = 
0.5831

partEdge = edge(partMdl,XTest(:,idx(1:10)),YTest)
partEdge = 
0.7593

The test sample edge of the classifier using the 10 most important predictors is larger.

Input Arguments

collapse all

Naive Bayes classification model, specified as a ClassificationNaiveBayes model object or CompactClassificationNaiveBayes model object returned by fitcnb or compact, respectively.

Sample data used to train the model, specified as a table. Each row of tbl corresponds to one observation, and each column corresponds to one predictor variable. tbl must contain all the predictors used to train Mdl. Multicolumn variables and cell arrays other than cell arrays of character vectors are not allowed. Optionally, tbl can contain additional columns for the response variable and observation weights.

If you train Mdl using sample data contained in a table, then the input data for edge must also be in a table.

Response variable name, specified as the name of a variable in tbl.

You must specify ResponseVarName as a character vector or string scalar. For example, if the response variable y is stored as tbl.y, then specify it as 'y'. Otherwise, the software treats all columns of tbl, including y, as predictors.

If tbl contains the response variable used to train Mdl, then you do not need to specify ResponseVarName.

The response variable must be a categorical, character, or string array, logical or numeric vector, or cell array of character vectors. If the response variable is a character array, then each element must correspond to one row of the array.

Data Types: char | string

Predictor data, specified as a numeric matrix.

Each row of X corresponds to one observation (also known as an instance or example), and each column corresponds to one variable (also known as a feature). The variables in the columns of X must be the same as the variables that trained the Mdl classifier.

The length of Y and the number of rows of X must be equal.

Data Types: double | single

Class labels, specified as a categorical, character, or string array, logical or numeric vector, or cell array of character vectors. Y must have the same data type as Mdl.ClassNames. (The software treats string arrays as cell arrays of character vectors.)

The length of Y must be equal to the number of rows of tbl or X.

Data Types: categorical | char | string | logical | single | double | cell

Observation weights, specified as a numeric vector or the name of a variable in tbl. The software weighs the observations in each row of X or tbl with the corresponding weights in Weights.

If you specify Weights as a numeric vector, then the size of Weights must be equal to the number of rows of X or tbl.

If you specify Weights as the name of a variable in tbl, then the name must be a character vector or string scalar. For example, if the weights are stored as tbl.w, then specify Weights as 'w'. Otherwise, the software treats all columns of tbl, including tbl.w, as predictors.

Data Types: double | char | string

More About

collapse all

Classification Edge

The classification edge is the weighted mean of the classification margins.

If you supply weights, then the software normalizes them to sum to the prior probability of their respective class. The software uses the normalized weights to compute the weighted mean.

When choosing among multiple classifiers to perform a task such as feature section, choose the classifier that yields the highest edge.

Classification Margins

The classification margin for each observation is the difference between the score for the true class and the maximal score for the false classes. Margins provide a classification confidence measure; among multiple classifiers, those that yield larger margins (on the same scale) are better.

Posterior Probability

The posterior probability is the probability that an observation belongs in a particular class, given the data.

For naive Bayes, the posterior probability that a classification is k for a given observation (x1,...,xP) is

P^(Y=k|x1,..,xP)=P(X1,...,XP|y=k)π(Y=k)P(X1,...,XP),

where:

  • P(X1,...,XP|y=k) is the conditional joint density of the predictors given they are in class k. Mdl.DistributionNames stores the distribution names of the predictors.

  • π(Y = k) is the class prior probability distribution. Mdl.Prior stores the prior distribution.

  • P(X1,..,XP) is the joint density of the predictors. The classes are discrete, so P(X1,...,XP)=∑k=1KP(X1,...,XP|y=k)π(Y=k).

Prior Probability

The prior probability of a class is the assumed relative frequency with which observations from that class occur in a population.

Classification Score

The naive Bayes score is the class posterior probability given the observation.

Extended Capabilities

Version History

Introduced in R2014b

See Also

| | | | | | |

Topics