Deploy Signal Classifier Using Wavelets and Deep Learning on Raspberry Pi

ECG Data Description

In this example, ECG data from PhysioNet is used. The ECG data is obtained from three groups of people: persons with cardiac arrhythmia (ARR), persons with congestive heart failure (CHF), and persons with normal sinus rhythms (NSR). The data set includes 96 recordings from persons with ARR, 30 recordings from persons with CHF, and 36 recordings from persons with NSR. The 162 ECG recordings are from three PhysioNet databases: MIT-BIH Arrhythmia Database [2][3], MIT-BIH Normal Sinus Rhythm Database [3], and The BIDMC Congestive Heart Failure Database [1][3]. Shortened ECG data of the above references can be downloaded from the GitHub repository.

Prerequisites

For supported versions of libraries and for information about setting up environment variables, see Prerequisites for Deep Learning with MATLAB Coder (MATLAB Coder). This example is not supported in MATLAB Online™.

Functionality of Generated Code

The core function in the generated executable, processECG, uses 65,536 samples of single-precision ECG data as input. The function:

type processECG

function [YPred] = processECG(input)
% processECG function - converts 1D ECG to image and predicts the syndrome
% of heart disease
%
% This function is only intended to support the example:
% Signal Classification Code Generation Using Wavelets and
% Deep Learning on Raspberry Pi. It may change or be removed in a
% future release.

% Copyright 2020 The MathWorks, Inc.

    % colourmap for image transformation
    persistent net jetdata;
    if(isempty(jetdata))
        jetdata = colourmap(128,class(input));
    end

    % Squeezenet trained network
    if(isempty(net))
        net = coder.loadDeepLearningNetwork('trainedNetCGARM.mat');
    end

    % Wavelet Transformation & Image conversion
    cfs = ecg_to_Image(input);
    image = ind2rgb(im2uint8(rescale(cfs)),single(jetdata));
    image = im2uint8(imresize(image,[227,227]));

    % figure
    if isempty(coder.target)        
        imshow(image);
    end

    % Prediction
    [YPred] = extractdata(predict(net,dlarray(single(image),"SSC")));

    %% ECG to image conversion
    function cfs = ecg_to_Image(input)

        %Wavelet Transformation
        persistent filterBank
        siglen = length(input);
        if isempty(filterBank)
            filterBank = cwtfilterbank('SignalLength',siglen,'VoicesPerOctave',6);
        end
        %CWT conversion
        cfs = abs(filterBank.wt(input));
    end


    %% Colourmap
    function J = colourmap(m,class)

        n = ceil(m/4);
        u = [(1:1:n)/n ones(1,n-1) (n:-1:1)/n]';
        g = ceil(n/2) - (mod(m,4)==1) + (1:length(u))';
        r = g + n;
        b = g - n;
        r1 = r(r<=128);
        g1 = g(g<=128);
        b1 = b(b >0);
        J = zeros(m,3);
        J(r1,1) = u(1:length(r1));
        J(g1,2) = u(1:length(g1));
        J(b1,3) = u(end-length(b1)+1:end);
        feval = str2func(class);
        J = feval(J);
    end
end

Create Code Generation Configuration Object

Create a code generation configuration object for generation of an executable program. Specify generation of C++ code.

cfg = coder.config('exe');
cfg.TargetLang = 'C++';

Set Up Configuration Object for Deep Learning Code Generation

Create a coder.ARMNEONConfig object. Specify the same version of the ARM Compute library as the one on the Raspberry Pi. Specify the architecture of the Raspberry Pi.

dlcfg = coder.DeepLearningConfig('arm-compute');
dlcfg.ArmComputeVersion = '19.05';
dlcfg.ArmArchitecture = 'armv7';

Attach Deep Learning Configuration Object to Code Generation Configuration Object

Set the DeepLearningConfig property of the code generation configuration object to the deep learning configuration object. Make the MATLAB Source Comments visible in the configuration object at the time of code generation.

cfg.DeepLearningConfig = dlcfg;
cfg.MATLABSourceComments = 1;

Create a Connection to the Raspberry Pi

Use the MATLAB Support Package for Raspberry Pi Support Package function, raspi, to create a connection to the Raspberry Pi. In the following code, replace:

if (~exist("r","var"))
    r = raspi('raspiname','username','password');
end

Configure Code Generation Hardware Parameters for Raspberry Pi

Create a coder.Hardware object for Raspberry Pi and attach it to the code generation configuration object.

hw = coder.hardware('Raspberry Pi');
cfg.Hardware = hw;

Specify the build folder on the Raspberry Pi.

buildDir = '~/remdirECG';
cfg.Hardware.BuildDir = buildDir;

Provide C++ Main File for Code Execution

The C++ main file reads the input ECG data, calls the processECG function to perform preprocessing and deep learning using CNN on the ECG data, and displays the classification probability.

Specify the main file in the code generation configuration object. To learn more about generating and customizing main_ecg_raspi.cpp, refer to Generating Standalone C/C++ Executables from MATLAB Code (MATLAB Coder).

cfg.CustomSource = 'main_ecg_raspi.cpp';

Generate Source C++ Code Using codegen

Use the codegen function to generate the C++ code. When codegen is used with the MATLAB Support Package for Raspberry Pi Hardware, the executable is built on the Raspberry Pi board.

Make sure to set the environment variables ARM_COMPUTELIB and LD_LIBRARY_PATH on the Raspberry Pi. See Prerequisites for Deep Learning with MATLAB Coder (MATLAB Coder).

codegen -config cfg processECG -args {ones(1,65536,'single')} -d arm_compute  

 Deploying code. This may take a few minutes. 
Code generation successful.

Fetch Generated Executable Directory

To test the generated code on the Raspberry Pi, copy the input ECG signal to the generated code directory. You can find this directory manually or by using the raspi.utils.getRemoteBuildDirectory API. This function lists the directories of the binary files that are generated by using codegen.

applicationDirPaths = raspi.utils.getRemoteBuildDirectory('applicationName','processECG')

applicationDirPaths = 1×1 cell array
    {1×1 struct}

The complete path to the remote build directory is derived from the present working directory. If you do not know which applicationDirPaths entry contains the generated code, use the helper function helperFindTargetDir. Otherwise, specify the proper directory.

directoryUnknown = true;

if directoryUnknown
    targetDirPath = helperFindTargetDir(applicationDirPaths);
else   
    targetDirPath = applicationDirPaths{1}.directory;
end

Copy Input File to Raspberry Pi

The text file input_ecg_raspi.csv contains the ECG samples of a representative ARR signal. To copy the file required to run the executable program, use putFile, which is available with the MATLAB Support Package for Raspberry Pi Hardware.

r.putFile('input_ecg_raspi.csv', targetDirPath);

For a pictorial representation, the first 1000 samples can be plotted by using these steps.

input = dlmread('input_ecg_raspi.csv');
plot(input(1:1000))
title('ARR Signal')

Run Executable on Raspberry Pi

Run the executable program on the Raspberry Pi from MATLAB and direct the output back to MATLAB. The input file name is passed as the command line argument for the executable.

exeName = 'processECG.elf';           % executable name
fileName = 'input_ecg_raspi.csv';     % Input ECG file that is pushed to target
command = ['cd ' targetDirPath ';./' exeName ' ' fileName];
output = system(r,command)

output = 
    'Predicted Values on the Target Hardware
     ARR            CHF            NSR
     0.806078	0.193609	0.000313103
     '

References

Supporting Functions

helperFindTargetDir

function targetDir = helperFindTargetDir(dirPaths)
%
% This function is only intended to support wavelet deep learning examples.
% It may change or be removed in a future release.

% find pwd
p = pwd;
if ispc
    % replace blank spaces with underscores
    p = strrep(p,' ','_');
    
    % split path into component folders
    pSplit = regexp(p,filesep,'split');
    
    % Since Windows uses colons, remove any colons that occur
    for k=1:numel(pSplit)
        pSplit{k} = erase(pSplit{k},':');
    end
    
    % now build the path using Linux file separation
    pLinux = '';
    for k=1:numel(pSplit)-1
        pLinux = [pLinux,pSplit{k},'/'];
    end
    pLinux = [pLinux,pSplit{end}];
else
    pLinux = p;
end

targetDir = '';
for k=1:numel(dirPaths)
    d = strfind(dirPaths{k}.directory,pLinux);
    if ~isempty(d)
        targetDir = dirPaths{k}.directory;
        break
    end
end

if numel(targetDir) == 0
    disp('Target directory not found.');
end
end