addRFNoCStreamInterface
Description
addRFNoCStreamInterface(
adds an RFNoC streaming interface that you can use to control the DUT ports mapped to data
streaming interfaces in the generated IP core from MATLAB® and specifies name-value arguments.dut
,Name=Value
)
Examples
Access DUT, Map RFNoC Streaming Interface and Read Data
Create a usrp
System object™, specifying a radio setup configuration previously saved in the Radio Setup wizard.
device = usrp("MyRadio");
Configure your radio with the target interfaces.
describeFPGA(device, "ModelName_wthandoffinfo.mat");
Create an fpga
object to access your DUT on the FPGA of your radio.
dut = fpga(device);
Add an RFNoC streaming interface to your DUT.
addRFNoCStreamInterface(dut, ... "InterfaceID", "RX_STREAM#0", ... "Streamer", "0/RX_STREAM#0", ... "Direction", "OUT", ... "FrameSize", 1000, ... "DDRAllocation", 1000, ... "Timeout", []);
Create a hdlcoder.DUTPort
object for the DUT port and specify the properties.
DUTPort_Data_Out = hdlcoder.DUTPort("Data_Out", ... "Direction", "OUT", ... "DataType", "uint32", ... "IsComplex", false, ... "Dimension", [1 1], ... "IOInterface", "RX_STREAM#0");
Map the DUT port to the RFNoC interface you added to your DUT.
mapPort(dut, DUTPort_Data_Out);
Connect to the radio and apply radio front end properties.
setup(device);
Call the usrp System object™ as a function to start the radio front end. Request 1000 samples.
device(1000);
Read data from the DUT port.
[dataRx,numSamps,overflow] = readPort(dut,"Data_Out")
dataRx = 1000×1 uint32 column vector
4294901766
5
262150
4
4294901760
4294639613
131073
4294574078
4294639617
4294967294
⋮
numSamps = 1000
overflow = logical
0
Release the hardware resources.
release(dut);
Access DUT, Map RFNoC Streaming Interface and Write Data
Create a usrp
System object™, specifying a radio setup configuration previously saved in the Radio Setup wizard.
device = usrp("MyRadio");
Configure your radio with the target interfaces.
describeFPGA(device, "ModelName_wthandoffinfo.mat");
Create an fpga
object to access your DUT on the FPGA of your radio.
dut = fpga(device);
Add an RFNoC streaming interface to your DUT. Specify a frame size and DDR allocation of dataLength
samples.
dataLength = 1000; addRFNoCStreamInterface(dut, ... "InterfaceID", "TX_STREAM#0", ... "Streamer", "0/TX_STREAM#0", ... "Direction", "IN", ... "FrameSize", dataLength, ... "DDRAllocation", dataLength, ... "WriteMode","continuous");
Create a hdlcoder.DUTPort
object for the DUT port and specify the properties.
DUTPort_Data_In = hdlcoder.DUTPort("Data_In", ... "Direction", "IN", ... "DataType", "uint32", ... "IsComplex", false, ... "Dimension", [1 1], ... "IOInterface", "TX_STREAM#0");
Map the DUT port to the RFNoC interface you added to your DUT.
mapPort(dut, DUTPort_Data_In);
Connect to the radio and apply radio front end properties.
setup(device);
Generate random data with length dataLength
and write it to the the DUT port.
data = randn(dataLength,1);
numSamps = writePort(dut,"Data_In",data)
numSamps = 1000
Release the hardware resources.
release(dut);
Input Arguments
dut
— Target DUT on the FPGA of a target NI™ USRP™ radio device
fpga
object
Target DUT on the FPGA of a target NI USRP radio device, specified as an fpga
object.
Name-Value Arguments
Specify pairs of arguments
as Name1=Value1,...,NameN=ValueN
, where Name
is the
argument name and Value
is the corresponding value. Name-value arguments
must appear after other arguments, but the order of the pairs does not matter.
Example: InterfaceID
="yourDUTSubsystemName"
,
Streamer
="0/RX_STREAM#0"
InterfaceID
— Name assigned to the RFNoC register interface
string scalar
Name assigned to the RFNoC streaming interface, specified as a string scalar.
Example: "yourDUTSubsystemName"
Data Types: string
Streamer
— Name of the RFNoC streamer
string scalar
Name of the RFNoC streamer, specified as a string. The RFNoC streamer name is generated from the interfaces you assign in the Map Target Interfaces step in the targeting workflow. The format is:
Data_In0 —
"0/RX_STREAM#0"
Data_InN —
"0/RX_STREAM#N"
Data_Out0 —
"0/TX_STREAM#0"
Data_OutN —
"0/TX_STREAM#N"
Example: "0/RX_STREAM#2"
Data Types: string
Direction
— Interface direction
"IN"
| "OUT"
Interface direction, specified as one of the following options.
"IN"
— The interface is an input to the DUT."OUT"
— The interface is an output from the DUT.
Data Types: string
DDRAllocation
— Memory allocation in samples
positive integer
Memory allocation in the PL DDR buffer in samples, specified as a positive
integer. Set this to the same value as FrameSize
.
Only set this property if you specified streaming connections to the PL DDR buffer in the Map Target Interfaces step in the targeting workflow.
Example: 250e6
Timeout
— Timeout in seconds
positive integer | empty array []
Timeout in seconds of the readPort
function, specified as a positive integer or an empty array.
If you do not set this argument or set it to []
, the timeout is
calculated based on the frame size and sample rate, where
'Timeout'=1+(
, where FrameSize
/SampleRate)SampleRate
is a property of the usrp
object.
Example: 5
Dependencies
Specify this argument only if the streaming interface is an output from the DUT.
WriteMode
— Write mode
"continuous"
| "once"
Write mode, specified as one of these options.
You can write data continuously only if the data streaming interface is connected to the PL DDR Buffer. You specify this in the Map Target Interfaces step of the targeting workflow.
Example: 5
Dependencies
Specify this argument only if the streaming interface is an input to the DUT.
Version History
Introduced in R2024a
See Also
Objects
Functions
MATLAB 命令
您点击的链接对应于以下 MATLAB 命令:
请在 MATLAB 命令行窗口中直接输入以执行命令。Web 浏览器不支持 MATLAB 命令。
Select a Web Site
Choose a web site to get translated content where available and see local events and offers. Based on your location, we recommend that you select: .
You can also select a web site from the following list:
How to Get Best Site Performance
Select the China site (in Chinese or English) for best site performance. Other MathWorks country sites are not optimized for visits from your location.
Americas
- América Latina (Español)
- Canada (English)
- United States (English)
Europe
- Belgium (English)
- Denmark (English)
- Deutschland (Deutsch)
- España (Español)
- Finland (English)
- France (Français)
- Ireland (English)
- Italia (Italiano)
- Luxembourg (English)
- Netherlands (English)
- Norway (English)
- Österreich (Deutsch)
- Portugal (English)
- Sweden (English)
- Switzerland
- United Kingdom (English)