release

Create a usrp System object, specifying a radio setup configuration previously saved in the Radio Setup wizard.

device = usrp("MyRadio");

Configure your radio with the target interfaces by using the describeFPGA function.

describeFPGA(device,"ModelName_wthandoffinfo.mat"); 

Create an fpga object to access your DUT on the FPGA of your radio.

dut = fpga(device);

Add an RFNoC register interface to your DUT by using the addRFNoCRegisterInterface function.

addRFNoCRegisterInterface(dut, ...
    "InterfaceID","DUTName", ...
    "RFNoCBlock","0/DUTName#0");

Create an hdlcoder.DUTPort object for the DUT port and specify the properties.

DUTPort_Read_Register = hdlcoder.DUTPort("Read_Register", ...
	"Direction","OUT", ...
	"DataType","int16", ...
	"IsComplex",false, ...
	"Dimension",[1 1], ...
	"IOInterface","DUTName", ...
	"IOInterfaceMapping",1);

Using the mapPort function, map the DUT port to the RFNoC interface you added to your DUT.

mapPort(dut,DUTPort_Read_Register);

Connect to the radio and apply radio front end properties by calling the setup function.

setup(device);

Read data from the DUT port by using the readPort function.

data = readPort(dut,"Read_Register")

data = int16

0

Release the hardware resources.

release(dut);