Multi Face Detection-Tracking

Question

antonio 2014-6-13

1
链接

此问题的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/134045-multi-face-detection-tracking

评论： Dima Lisin 2014-7-14

Hi, I'm a student from Politecnico of Milano; I'm preparing a project abount face detection and tracking using this code:

:::START MODIFIED CODE BY ME:::

clear all

close all

clc

% Create a cascade detector object.

faceDetector = vision.CascadeObjectDetector();

% Read a video frame and run the face detector.

videoFileReader = vision.VideoFileReader('video.avi');

videoFrame = step(videoFileReader);

bbox = step(faceDetector, videoFrame);

[N M] = size(bbox);

% Draw the returned bounding box around the detected face.

for i = 1:N

videoFrame = insertShape(videoFrame, 'rectangle', bbox(i,:));

end

figure; imshow(videoFrame); title('Detected face');

% Detect feature points in the face region.

figure, imshow(videoFrame), hold on, title('Detected features');

for i = 1:N

points = detectMinEigenFeatures(rgb2gray(videoFrame), 'ROI', bbox(i,:));

punti{i} = points.Location;

plot(points);

end

::: START ORIGINAL CODE :::

% Create a point tracker and enable the bidirectional error constraint to % make it more robust in the presence of noise and clutter.

pointTracker = vision.PointTracker('MaxBidirectionalError', 2);

% Initialize the tracker with the initial point locations and the initial % video frame.

points = points.Location;

initialize(pointTracker, points, videoFrame);

videoPlayer = vision.VideoPlayer('Position',... [100 100 [size(videoFrame, 2), size(videoFrame, 1)]+30]);

% Make a copy of the points to be used for computing the geometric % transformation between the points in the previous and the current frames

oldPoints = points;

while ~isDone(videoFileReader)

% get the next frame

videoFrame = step(videoFileReader);

    % Track the points. Note that some points may be lost.
    [points, isFound] = step(pointTracker, videoFrame);
    visiblePoints = points(isFound, :);
    oldInliers = oldPoints(isFound, :);
    if size(visiblePoints, 1) >= 2 % need at least 2 points
        % Estimate the geometric transformation between the old points
        % and the new points and eliminate outliers
        [xform, oldInliers, visiblePoints] = estimateGeometricTransform(...
            oldInliers, visiblePoints, 'similarity', 'MaxDistance', 4);
        % Apply the transformation to the bounding box
        [bboxPolygon(1:2:end), bboxPolygon(2:2:end)] ...
            = transformPointsForward(xform, bboxPolygon(1:2:end), bboxPolygon(2:2:end));
        % Insert a bounding box around the object being tracked
        videoFrame = insertShape(videoFrame, 'Polygon', bboxPolygon);
        % Display tracked points
        videoFrame = insertMarker(videoFrame, visiblePoints, '+', ...
            'Color', 'white');
        % Reset the points
        oldPoints = visiblePoints;
        setPoints(pointTracker, oldPoints);
    end
    % Display the annotated video frame using the video player object
    step(videoPlayer, videoFrame);
end

% Clean up

release(videoFileReader);

release(videoPlayer);

release(pointTracker); __________________________________________________________________________

I need to modify it for detecting and tracking more faces in a video streaming;

I want ask if it's possible to set point.tracker to initialize all faces (the code inizialize only one face!) and track multi faces for remaining frames; Thanks a lot for helping me!!

2 个评论
显示无隐藏无

antonio 2014-6-13

在 MATLAB Online 中打开

I adjusted the code like this:

clear all

close all

clc

% Create a cascade detector object.

faceDetector = vision.CascadeObjectDetector();

% Read a video frame and run the face detector.

videoFileReader = vision.VideoFileReader('video2.avi');

videoFrame = step(videoFileReader);

bbox = step(faceDetector, videoFrame);

[N M] = size(bbox);

% Draw the returned bounding box around the detected face.

for i = 1:N

videoFrame = insertShape(videoFrame, 'rectangle', bbox(i,:));

end

figure; imshow(videoFrame); title('Detected face');

% Detect feature points in the face region.

figure, imshow(videoFrame), hold on, title('Detected features');

for i = 1:N

points = detectMinEigenFeatures(rgb2gray(videoFrame), 'ROI', bbox(i,:));

punti{i} = points.Location;

plot(points);

end

% Create a point tracker and enable the bidirectional error constraint to % make it more robust in the presence of noise and clutter.

for i = 1:N

pointTracker{i} = vision.PointTracker('MaxBidirectionalError', 2);

% Initialize the tracker with the initial point locations and the initial

% video frame.

initialize(pointTracker{i}, punti{i}, videoFrame);

% Make a copy of the points to be used for computing the geometric

% transformation between the points in the previous and the current frames

oldPoints{i} = punti{i};

end

videoPlayer = vision.VideoPlayer('Position',... [100 100 [size(videoFrame, 2), size(videoFrame, 1)]+30]);

while ~isDone(videoFileReader) % get the next frame

videoFrame = step(videoFileReader);

    % Track the points. Note that some points may be lost.
    for i =1:N
        [punti{i}, isFound] = step(pointTracker{i}, videoFrame);
        visiblePoints{i} = punti{i}(isFound, :);
        oldInliers{i} = oldPoints{i}(isFound, :);
        if size(visiblePoints{i}, 1) >= 2 % need at least 2 points
            % Estimate the geometric transformation between the old points
            % and the new points and eliminate outliers
            [xform, oldInliers{i}, visiblePoints{i}] = estimateGeometricTransform(...
                oldInliers{i}, visiblePoints{i}, 'similarity', 'MaxDistance', 4);
            % Apply the transformation to the bounding box
            bbox(i:M:end)=transformPointsForward(xform,bbox(i:M:end));
            % Insert a bounding box around the object being tracked
            videoFrame = insertShape(videoFrame, 'Rectangle',bbox(i,:));
            % Reset the points
            oldPoints{i} = visiblePoints{i};
            setPoints(pointTracker{i}, oldPoints{i});
            plot(visiblePoints{i});
        end
    end
    % Display the annotated video frame using the video player object
    step(videoPlayer, videoFrame);
end

% Clean up

release(videoFileReader);

release(videoPlayer);

release(pointTracker);

_____________________________________________________________________

but it doesn't work very well..Any help please??

Dima Lisin 2014-7-14

I have added a link to a working example of multiple face tracking to my answer.

请先登录，再进行评论。

请先登录，再回答此问题。

Answer 1

Dima Lisin 2014-6-21

0
链接

此回答的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/134045-multi-face-detection-tracking#answer_141871

编辑：Dima Lisin 2014-7-14

A better way to do this is to concatenate all the detected corner points from all faces into one M-by-2 matrix and call the step() method of the point tracker only once for each video frame. You would have to create a 1-D array of indices to remember which point belongs to which face.

Here's a working example.