Transparent plane over on object

Question

mick777 2014-6-19

0
链接

此问题的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/136422-transparent-plane-over-on-object

评论： Chad Greene 2014-8-16

Can anyone please explain to me what am I doing wrong here. I plan to have a transparent plane over the 3d object(cylinder), I have tried all possible methods to define the plane and set the transparency using alpha parameter but the plane ends up being a solid color. The code only for the transparent plane works fine until I plot it along with the object. Here is a Snippet of my code:

plot my_3dobject; %plot command for my 3d object
%code to define and plot the transparent plane using three reference points
pointA = [0,0,0];
pointB = [-4,0,0];
pointC = [4,0,4];
normal = cross(pointA-pointB, pointA-pointC); %# Calculate plane normal
%# Transform points to x,y,z
xx = [pointA(1) pointB(1) pointC(1)];  
yy = [pointA(2) pointB(2) pointC(2)];
zz = [pointA(3) pointB(3) pointC(3)];
%Find all coefficients of plane equation    
A = normal(1); B = normal(2); C = normal(3); 
D = -dot(normal,pointA);
%Decide on a suitable showing range
xLim = [min(xx) max(xx)];
zLim = [min(zz) max(zz)];
[X,Z] = meshgrid(xLim,zLim);
Y = (A * X + C * Z + D)/ (-B);
reOrder = [1 2  4 3];
v = patch(X(reOrder),Y(reOrder),Z(reOrder),'g');
set(v,'facealpha',0.1);
set(v,'edgealpha',0.1);

Any pointers/suggestions will be really helpful. Thank you

0 个评论
显示 -2更早的评论隐藏 -2更早的评论

请先登录，再进行评论。

请先登录，再回答此问题。

Answer 1

Chad Greene 2014-6-19

1
链接

此回答的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/136422-transparent-plane-over-on-object#answer_141690

在 MATLAB Online 中打开

I can think of two possible problems. If you're plotting the object after plotting the plane, the plane will disappear if you don't use the hold on command before plotting the object. The other possible issue is the figure renderer. Try each of the following:

set(gcf,'renderer','opengl')

If that doesn't work, try

set(gcf,'renderer','zbuffer')

and if that doesn't work try

set(gcf,'renderer','painters')

Hope this helps.

2 个评论
显示无隐藏无

mick777 2014-6-20

在 MATLAB Online 中打开

Thanks for having taken the time to reply Chad, I made a few changes to the code and was able to get it. The set(gcf,'renderer','opengl') command worked just fine. Thanks once again

plot my_3dobject; %plot command for my 3d object
hold on;
threshold = 0; 
% Obtain the limits of the axes
%zp = get(gca,'Zlim');
zp = [0.5 4];
xp = get(gca,'Xlim');
% Use the axes x and Y limits to find the co-ordinates for the patch
x1 = [ xp(1) xp(2) xp(2) xp(1)];
z1 = [ zp(1) zp(1) zp(2) zp(2)];y1 = ones(1,numel(z1))* threshold; 
v = patch(x1,y1,z1, 'g');
set(v,'facealpha',0.1);
set(v,'edgealpha',0.1);
set(gcf,'renderer','opengl') ;
hold on;