Connecting a PS converter block to a valve actuator and and a sine signal source

Question

Carlos Rueda 2022-2-20

0
链接

此问题的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/1654155-connecting-a-ps-converter-block-to-a-valve-actuator-and-and-a-sine-signal-source

回答： Sabin 2023-10-2

Following the existing tutorial I am trying to build following model for simulation:

Unfortunately the converter block on the left side won't connect properly between the two next elements. I am only able to connect the valve acutator to the input of the converter block, that is, where the sine wave is supposed to be:

Does anyone has a clue?

Thanks in advance.

0 个评论
显示 -2更早的评论隐藏 -2更早的评论

请先登录，再进行评论。

请先登录，再回答此问题。

Answer 1

Sabin 2023-10-2

0
链接

此回答的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/1654155-connecting-a-ps-converter-block-to-a-valve-actuator-and-and-a-sine-signal-source#answer_1323309

There are two blocks that can be used as interfaces between Simscape and Simulink, PS-Simulink Converter and Simulink-PS Converter. As you want to send a Simulink signal to a Simscape network, the block you need to use is the Simulink-PS Converter.