Pressure-flow characteristic for a 4-Way Directional Valve

1 次查看（过去 30 天）
Carlo Pennacchio
Carlo Pennacchio 2022-7-20
回答： Yifeng Tang 2022-7-20
I've to parametrize the block "4-Way Directional Valve" in Simscape Fluids by using Pressure-flow characteristic. I've read carefully the documentation: https://it.mathworks.com/help/physmod/hydro/ref/4waydirectionalvalve.html, but unfortunately not everything is clear. In particular the pressure differential vector is not well defined (what positive pressure or negative pressure means?) and the same for the volumetric flow. Assuming positive pressure drop from A to P and positive flow from P to A I've used the following parameter, but I'm note sure it's right, someone could confirm?
x= [0,2,4,6,8,10]; %mm, spool position
P=[5,50,315]; %pressure vector bar
q5b= [0,0, 4, 14,31,58]; %liters/minute at 5 bar
q50b=[0,0, 8, 20,35,58]; %liters/minute at 50 bar
q315b=[0,0, 13, 23,33,40]; %liters/minute at 315 bar
M=[q5b' q50b' q315b']; %volumetric flow rate table

请先登录，再回答此问题。

回答（1 个）

Yifeng Tang
Yifeng Tang 2022-7-20
I believe the pressure differentials refer to p.P-p.A, p.P-p.B, p.A-p.T, p.B-p.T. The flow direction is defined in the save way.
Your parameters look OK, although I suspect you may run into issues if for example, somehow p.A is higher than p.P. The extrapolation may give you unexpected results.
Also, consider use isothermal liquid (IL) domain instead of hydraulics: https://www.mathworks.com/help/physmod/simscape/ug/upgrading-hydraulic-models-to-use-isothermal-liquid-blocks.html

类别

在 Help Center 和 File Exchange 中查找有关 Simscape Fluids 的更多信息

标签

产品


版本

R2021b

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by