How to execute two MATLAB scripts simultaneously

138 次查看（过去 30 天）
Sabrina Wendt
Sabrina Wendt 2011-2-26
评论： David Katz 2023-3-2
How do I execute two MATLAB scripts simultaneously? The one script is recording an EEG measurement while the other script is generating a visual stimuli on the screen. I hope that it is possible! And if it is, it would be nice with a code example.
The script for recording EEG is:
fs= 256;
measurement_time=10;
%%Setting up the dataloggers
% Set up the communication with the dataloggers
ai = analoginput('guadaq',1);
Serial = ai.DeviceSerial;
addchannel(ai,[1]);
% Apply general filtering
set(ai.Channel(1),'BPIndex',45); % bandpassfilter the raw-input
set(ai.Channel(1),'NotchIndex',2); % notchfilter the raw-input
% specify samplefrequency and the total number of samples that should
% be obtained before stopping the datatransfer
set(ai,'SampleRate',fs,'SamplesPerTrigger',measurement_time*fs);
% Define the filename for logging the data to harddisk. LoggingMode is set to Disk in order
% to stream the data to the harddisk. Use Disk&Memory to stream the data to harddisk and to
% memory. LogToDiskMode is set to Overwrite to replace an existing file with the same
% name.
set(ai,'LogFileName','test','LoggingMode','Disk','LogToDiskMode','Overwrite');
start(ai)
while ai.SamplesAcquired< measurement_time*fs
end
data = getdata(ai);
plot(data), grid on
% Saving the data file
outputfile= 'measurement.mat';
save(outputfile, 'data');
delete(ai)
clear ai-----
The script for generating a visual stimuli is:
% ---------------------- Psychophysics Toolbox ---------------------------
% By using the Matlab toolbox - psychophysics - two flickering squares are
% implemented. The program uses the refresh rate of the screen in order to
% generate flicker, by shifting a chosen area between the background color
% (black) and a set color - here white.
% Last edited 7th of February 2011
% ------------------------------------------------------------------------
screenNum=0;
flipSpd=0;
[wPtr,rect]=Screen('OpenWindow',screenNum); % wPtr - designate the window, rect - screen size
monitorFlipInterval=Screen('GetFlipInterval', wPtr); % Refresh time [s]
frame_rate = 1/monitorFlipInterval; % Frame rate [Hz]
%%-----------------------------------------------------------------------
p=8; % Sets the frequency for left hand square
P = frame_rate/(2*p); % Frequency [Hz]
q=4; % Sets the frequency for right hand square
Q = frame_rate/(2*q); % Frequency [Hz]
color_black = [255 255 255]; % Defining black color
color_white = [0 0 0]; % Defining white colot
CenX = rect(3)/2; % Center of width
CenY = rect(4)/2; % Center of height
Dis = 200; % Distance between the two squares
SqS = 300; % Square size
pos1=[CenX-Dis/2-SqS CenY-SqS/2 CenX-Dis/2 CenY+SqS/2]; % Position of left hand square
pos2=[CenX+Dis/2 CenY-SqS/2 CenX+Dis/2+SqS CenY+SqS/2]; % Position of right hand square
black=BlackIndex(wPtr); % Find the color lookup table values (black)
white=WhiteIndex(wPtr); % Find the color lookup table values (white)
%%-----------------------------------------------------------------------
Screen('FillRect',wPtr,black); % Fills a rectangle the size of the screen to be black
Screen(wPtr, 'Flip'); % Flip the screen from offscreen to onscreen
HideCursor;
tic
while toc<1;
end
Screen('FillRect',wPtr,black); % Blacks the screen
vbl=Screen(wPtr, 'Flip'); % Collect the time for the first flip with vbl
for i=1:300 % "time of run"
% Generate the flickering squares
if mod(i,p)==0
Screen('FillRect',wPtr,color_black, pos1);
else
Screen('FillRect',wPtr,color_white, pos1);
end
if mod(i,q)==0
Screen('FillRect',wPtr,color_black, pos2);
else
Screen('FillRect',wPtr,color_white, pos2);
end
Screen(wPtr, 'Flip');
end
Screen('FillRect',wPtr,black); % Blacks the screen
vbl=Screen(wPtr, 'Flip', vbl+(flipSpd*monitorFlipInterval));
tic
while toc<1;
end
tic
Screen('CloseAll');
ShowCursor-------
Can you tell if your code will work, Paulo?
  4 个评论
显示 2更早的评论
Paulo Silva
Paulo Silva 2011-2-27
Also be very careful with the timer settings, it's possible to start several stimuli and record at the same time and maybe crash matlab, to test make them just start the job once and stop.
Rasa
Rasa 2019-1-9
How did you resolve the answer of EEG and Visual stimuli finally ? I also need to do this for my research. If you were able to successfully do it, would you send me the code ?

请先登录，再进行评论。

请先登录，再回答此问题。

采纳的回答

Ian
Ian 2011-2-27
I am using matlab to control a neurophysiological data aquisition system (DAQ, plexon omniplex), and am also using the psychophysics toolbox (PTB) to generate stimuli, so basically doing what you need to do. You have the following problem much greater than simply running two scripts:
  1. Synchronisation: how will you know that your EEG timestamp is the same as the PTB's flip timestamp?
  2. Communication: do you need information past between display and DAQ matlab scripts at all?
My solutions are the following: I control the omniplex using my PTB code, it uses a LabJack to send out physical voltage pulses (immediately after Screen('flip') in the PTB code!) to control my electrophysiological data aquisition system. I've tested this by feeding these TTLs into my DAQ, and also recording a signal from a photodiode on the screen that displays output from the PTB to ensure they are synchronised together. Without this, you cannot know whether your stimulus and response really are properly aligned, and this will impact your interpretation of your results.
To see my data coming in online I have to use a different matlab script and I simply open another matlab instance. You can spawn secondary matlab sessions that run your script programatically from your first script (assuming you want to run a script called myScript.m), using:
Windows:
eval('!matlab -nodesktop -nosplash -r "myScript.m" &')
OS X:
eval('!osascript -e ''tell application "Terminal"'' -e ''activate'' -e ''do script "matlab -nodesktop -nosplash -maci -r \"myScript.m\""'' -e ''end tell''')
To communicate between these two matlab scripts I use UDP using pnet (it comes with PTB, also available on matlab file exchange) to allow both matlab scripts to talk to each other, pass variables and keep my data visualisation locked to what the stimulus was/is doing. You can for example use UDP packet after the Screen('flip') in PTB so your EEG system knows within a few milliseconds when your display changed if you don't know how to use a photodiode to check this.
Another solution, and one I thought was too limited for my needs but may work for you is the Parallel computing toolbox, see this interesting stack overflow question:
http://stackoverflow.com/questions/4410339/how-can-i-parallelize-input-and-display-in-matlab
  4 个评论
显示 2更早的评论
avinash pabbireddy
avinash pabbireddy 2013-11-21
i'm trying to collect emg data from ni data acquisition board and i want to collect force data simultaneously from a serial port can i run these two programs simultaneously so that i can collect both the data for a specific time
tic clc; close all; clear all; delete(instrfindall); s = serial ( 'COM5', 'BaudRate', 115200); set(s, 'Timeout',60); s.InputBufferSize =37020; tic fopen(s); %for i=1:20 data=fread(s); ---------------------------------------------------------- s = daq.createSession('ni'); s.addAnalogInputChannel('cDAQ2Mod1', 0, 'Voltage'); s.addAnalogInputChannel('cDAQ2Mod1', 1, 'Voltage'); s.Rate = 2000 s.DurationInSeconds = 60; [data5,time] = s.startForeground; toc

请先登录，再进行评论。

更多回答（4 个）

Jan
Jan 2011-2-27
You cannot run two scripts simultaneously in Matlab. Although you can start different threads in e.g. C, there is no guarantee, that the threads are performed simultaneously, because the OS decides about the order of execution and distribution to the different cores. Either you have to use a real-time OS and e.g. C. Or you can start two Matlab instances to run the two programs. Then I assume you need a synchronization, e.g. a light-diode scanning the screen - this has the advantage, that even the delay between Matlab's figure update and the display on the screen is considered.
  2 个评论
Paulo Silva
Paulo Silva 2011-2-27
You are absolutely right, 1 vote for you and another for Ian.
Sabrina Wendt
Sabrina Wendt 2011-2-28
Thanks for the illuminating but sad answer. It is not that important that the scripts are synchronized - the most important thing is that the EEG is sampled with a constant sampling frequency and that the stimuli is a constant flicker / constant frequency.

请先登录，再进行评论。

Paulo Silva
Paulo Silva 2011-2-26
I made this code yesterday, it displays the memory used by matlab in real time, it updates the plot every half second, in your case it might work with only a timer but you could add another timer with almost the same parameters except the callback function, for example t would record the EEG and t1 would generate the stimuli, in the callback functions you can just insert the m file name you already have for each job you want to perform.
Without knowing more about your scripts it's not easy to know if this approach would work.
function test
fig=figure;[user,sys] = memory;a=0;
set(fig,'CloseRequestFcn','delete(gcf);')
ax=axes;set(ax,'Ylimmode','manual');
h = plot(ax,NaN, NaN,'LineWidth',5);
set(ax,'Ylimmode','manual');
set(ax,'YLim',[0 sys.PhysicalMemory.Total/10^6])
ylabel('Memory used by matlab in Megabytes');
t = timer('TimerFcn',@readdata,...
'Period', 0.5,'executionmode','fixedSpacing');start(t)
function readdata(g1,gg1)
if (~ishandle(fig)),stop(t),return,end
m=memory;mem=m.MemUsedMATLAB;
set(h,'XData', [get(h, 'XData'), a],...
'YData', [get(h, 'YData'), mem/10^6]);
xd=get(h,'XData');yd=get(h,'YData');a=a+1;
if numel(xd)>=100
set(h,'XData',[xd(80:100)]);set(h,'YData',[yd(80:100)]);
end
end
end
  3 个评论
显示 1更早的评论
Paulo Silva
Paulo Silva 2011-2-27
编辑：Walter Roberson 2019-10-22
function testt
%stop(timerfind) %stop all timers
%delete(timerfind) %delete all timers
StopAfter=2;
RunTimes=0;
t1 = timer('TimerFcn',@rec,...
'Period', 5,'executionmode','fixedDelay','StartDelay',10);
t2 = timer('TimerFcn',@stm,...
'Period', 5,'executionmode','fixedDelay','StartDelay',10);
start(timerfind);
function rec(g1,gg1)
disp('rec')
RunTimes=RunTimes+1;
if RunTimes>=StopAfter
stop(timerfind)
delete(timerfind)
disp('timers stopped')
end
end
function stm(g1,gg1)
disp('stm')
end
end
Paulo Silva
Paulo Silva 2011-2-27
I finally found that Jan is right, if I put pause(1) in one of the functions the other will wait, that ain't good, I hope you can do the same like Ian did.
Sorry about the timers, I was sure that would work but it didn't.

请先登录，再进行评论。

Rob Purser
Rob Purser 2011-2-28
Hi,
The Data Acquisition Toolbox has the exact capability you want built in. There's a demo called "Using Callback Functions to Create Live Displays and Analysis" that is part of the product that teaches you how to do this.
Also, check out the "daqscope" demo that is part of the toolbox for a real world example of plotting the data as it arrives. It's more complex, but shows many of the techniques in a full application.
-Rob Purser
Manager of Test and Measurement
Mathworks
  3 个评论
显示 1更早的评论
Ian
Ian 2011-2-28
Rob, the problem is DAT doesn't guarantee it will not block matlab long enough that the psychophysics toolbox won't skip frames as I understand. Sabrina *needs* to guarantee she meets her timing deadlines which will be somewhere from 10-16ms, and in between that there will be little time to acquire and plot the data. If the display skips frames, her frequency of stimulation will change unreliably and she cannot safely perform a fourier analysis of the EEG signal.
Unless the DAT uses a parallel thread which guarantees non-blocking? When displaying data, you don't need millisecond precision, but when generating precise psychophysical stimuli, you do :)
Walter Roberson
Walter Roberson 2011-6-16
Hmmm .. _possibly_ "Acquiring Data and Generating Signals at the Same Time" ?? http://www.mathworks.com/products/daq/demos.html

请先登录，再进行评论。

hurrch
hurrch 2019-10-19
Good day
sorry i have to sneak into this conversation but i really need your expertise Sire.
I am a final year student of an institution in Africa and I have issues with my chosen project cause I do not have prior knowledge of coding or programming.
Please, I really need help with this project of mine as it will be due in 1 weeks’ time (1/11/2019), I don’t mind being assigned to someone good with the matlab DAQ toolbox for an extra fee. This is the crux of my project.
I am to write a code that will read data from two NI 9237 modules (6 channels in total). the modules are to read data from a force balance (strain due to force). The final result should be different plots for different force values against time. I will explain with a diagram and a flow chart, please do correct the flow chart if it is wrong. Some where in the code, there should be a scaling coefficient that will convert strain to force as needed for the equations. The code should plot the data in real time and also at the end of the acquisition. And the plots are individual force values against time. E.g N against time, M against time etc.
This is what I just did playing around with the code but I’m technically stuck afterwards.
daq.getVendors
daq.getDevices
s = daq.createSession ('ni');
ch1 = s.addAnalogInputChannel('Dev1', 'ai0', 'Bridge');
ch2 = s.addAnalogInputChannel('Dev1', 'ai1', 'Bridge');
ch3 = s.addAnalogInputChannel('Dev1', 'ai2', 'Bridge');
ch4 = s.addAnalogInputChannel('Dev2', 'ai0', 'Bridge');
ch5 = s.addAnalogInputChannel('Dev2', 'ai1', 'Bridge');
ch6 = s.addAnalogInputChannel('Dev2', 'ai2', 'Bridge');
ch1.BridgeMode = 'Full';
ch1.ExcitationVoltage = 10;
ch1.NominalBridgeResistance = 350;
ch2.BridgeMode = 'Full';
ch2.ExcitationVoltage = 10;
ch2.NominalBridgeResistance = 350;
ch3.BridgeMode = 'Full';
ch3.ExcitationVoltage = 10;
ch3.NominalBridgeResistance = 350;
ch4.BridgeMode = 'Full';
ch4.ExcitationVoltage = 10;
ch4.NominalBridgeResistance = 350;
ch5.BridgeMode = 'Full';
ch5.ExcitationVoltage = 10;
ch5.NominalBridgeResistance = 350;
ch6.BridgeMode = 'Full';
ch6.ExcitationVoltage = 10;
ch6.NominalBridgeResistance = 350;
attached below is the document to help understand what exactly i am doing and how far i have gone. it also has the flow chart, diagrams and equations.
i really do anticipate your reply.
thank you so much

类别

在 Help Center 和 File Exchange 中查找有关 EEG/MEG/ECoG 的更多信息

标签

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by