Antenna Toolbox horn in Narrowband Transmit Array shows wrong directivity in Sensor Array Analyzer (R2026a)
显示 更早的评论
In Narrowband Transmit Array I set "Specify sensor array as" = MATLAB expression, Expression = design(horn,10e9), fc = 10 GHz.
Analyze shows -29.83 dBi at 0 Az; 0 El, but pattern(design(horn,10e9),10e9,0,0) gives 15.5 dBi.
Workaround: sample the pattern and use phased.CustomAntennaElement:
h = design(horn,10e9);
az = -180:2:180; el = -90:2:90;
D = pattern(h,10e9,az,el);
ant = phased.CustomAntennaElement('FrequencyVector',[9e9 11e9], ...
'AzimuthAngles',az,'ElevationAngles',el,'MagnitudePattern',D);
With Sensor gain measure = dB this gives 15.51 dBi and correct results.
Questions:
1. Is using Antenna Toolbox objects directly in these blocks supported, or is this a bug?
2. Is CustomAntennaElement the recommended workflow?
3. For a rectangularArray with mutual coupling (each element a separate channel), is the right approach embedded element patterns + phased.HeterogeneousURA?
回答(1 个)
Ritam
2026-11-10,10:58
0 个投票
Hi Denys,
The "phased.CustomAntennaElement" approach is appropriate for using a radiation pattern obtained from an Antenna Toolbox antenna in a Phased Array System Toolbox model. It allows the simulated or measured spatial response to be represented explicitly using azimuth/elevation pattern data. See Custom Antenna Element and Antenna Array Analysis with Custom Radiation Pattern.
For an array where mutual coupling needs to be considered, using embedded element patterns is an appropriate workflow. Antenna Toolbox can calculate the pattern of an individual element within an array using the "ElementNumber" and "Termination" options of "pattern"; this embedded pattern includes the effect of mutual coupling from the other elements. See pattern and Modeling Mutual Coupling in Large Arrays Using Embedded Element Pattern.
If the embedded patterns differ by array position, they can be represented using individual "phased.CustomAntennaElement" objects and assigned to a "phased.HeterogeneousURA", which is designed for rectangular arrays whose element patterns vary from element to element. See phased.HeterogeneousURA.
Regarding the discrepancy between the approximately 15.5 dBi result from pattern and the -29.83 dBi result from the Narrowband Transmit Array analysis, I would recommend using the "phased.CustomAntennaElement" workflow as a workaround.
If you want the direct use of the Antenna Toolbox object in this particular block configuration, I would recommend you reaching out to Mathworks Technical Support for detailed investigation.
Thanks,
Ritam
类别
在 帮助中心 和 File Exchange 中查找有关 Antennas, Microphones, and Sonar Transducers 的更多信息
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!