So what is your question? Is this just a doit4me? Note that MATLAB is a computational tool, it is not designed for exact millisecond interfaces. You may need to consider a different tool for this purpose, depending on your requirements.

frankenberry 2017-7-26

此评论的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/349850-how-to-create-a-click-train-with#comment_472088

⋮

链接

此评论的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/349850-how-to-create-a-click-train-with#comment_472088

I'm looking for guidance on how to start. I'm a newbie but I've done the Matlab online tutorials. There is no help for click sounds or clicktrains, only for mouse clicks. I've created an array of zeros in which to put the ones to make the click but I'm a little lost when it comes to timing. I know the timing of my click intervals (75 ms to next click) and my clicks (100 microseconds) - see previous for other timing items. I know my sampling frequency is 32e3. I know my rate is 13.3 Hz. I'm missing how these all interact - how long would it run based on my sampling rate and frequency or do I set a time? We use Matlab all the time and it works beautifully for this. We combine it with Labview precision so it's not a problem. It would be nice if Matlab actually had help for the little things, like this. I can program more complicated things but I have trouble with this.

frankenberry 2018-4-26

此评论的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/349850-how-to-create-a-click-train-with#comment_561331

⋮

链接

此评论的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/349850-how-to-create-a-click-train-with#comment_561331

John, you didn't even attempt to answer the questions. This kind of support is nonsense. If you cannot provide support perhaps you should only answer questions from those people that don't require help.

Jan 2018-4-26

此评论的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/349850-how-to-create-a-click-train-with#comment_561379

⋮

链接

此评论的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/349850-how-to-create-a-click-train-with#comment_561379

在 MATLAB Online 中打开

@Patricia: As John I have to ask: What is your question?

I do not understand your message. What is a "click-train"? What is the meaning of "1s presented as 1 then two 1s then three 1s"? What is a SOA here? I do not get an idea of what you are talking of.

 The SOA stays the same at 75 ms no matter if there is one,
 two, or three ones.

This sounds like you have done something already. Then please post the code. Or is it a Simulink model? Then explain, which problem you want to solve. Take into account that most of the readers will not work exactly in your field.

frankenberry 2018-4-26

此评论的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/349850-how-to-create-a-click-train-with#comment_561436

⋮

链接

此评论的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/349850-how-to-create-a-click-train-with#comment_561436

Dear Jan: a click-train is can be created using a series of 1s in Matlab. You create a click by turning a 1 on and off. These are the parameters I used to create the click.

ici = 4; %inter-click interval for 2 or more clicks in ms. The clicks with intervening 0s are presented as 1, 75 ms, 1-4ms-1, 75ms, 1-4ms-1-4ms-1, 75ms, 1, etc.

Fs = 32e3; % sampling frequency

soa = 75; %time between click groups

dur = 1000; %ms in 1 second

rate = (dur/soa); %frequency of the impulse in Hz is 13.3

clicklength = ((Fs/dur)/Fs); %click length is equal to 100 microseconds (i.e. 0.001 ms)

num_samples = (Fs/rate); %number of samples = 2400

n_clicks = (1:3); %total number of clicktrain starts(ones) is Fs/soa = 426.6667 over entire Fs range

ti = 1/Fs:1/Fs:(dur/1000); % time index

Phase = 0

The creation of a click-train is a very popular question on this site and others as well. I have created a code that works but I think it's very messy. I think it could be done much cleaner.

frankenberry 2018-4-26

此评论的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/349850-how-to-create-a-click-train-with#comment_561442

⋮

链接

此评论的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/349850-how-to-create-a-click-train-with#comment_561442

SOA means Stimulus Onset Asynchrony.

Jan 2018-4-27

此评论的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/349850-how-to-create-a-click-train-with#comment_561633

⋮

链接

此评论的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/349850-how-to-create-a-click-train-with#comment_561633

在 MATLAB Online 中打开

@Patricia: I know a series of 1s as a "vector". E.g.:

v = [1,1,1,1]

I do not understand what "turning a 1 on and off" means. A number does not have a feature like "on" and "off".

I do not understand, what your code should do or what the comments mean,. E.g.:

clicklength = ((Fs/dur)/Fs); %click length is equal to 100 microseconds (i.e. 0.001 ms)

Why not simplifying it to

clicklength = 1/dur;

By the way, "100 microseconds" are not "0.001 ms".

Maybe the topic is very popular in this forum, but I did not heared of it yet. Again: What is your question? How can we help you? If you have a messy code and ask for improvements, post your code.

Jan 2018-4-30

此评论的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/349850-how-to-create-a-click-train-with#comment_562539

⋮

链接

此评论的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/349850-how-to-create-a-click-train-with#comment_562539

Your code looks okay. I'd omit the useless "clear,clc" and use fullfile instead of concatenating file names by [pth 'clicktrains_' ici_str '_' soa_str '_Fs32e3.xls'], but these are more cosmetic modifications. I do not see a potential for substantial improvements.

Jan 2018-6-15

此评论的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/349850-how-to-create-a-click-train-with#comment_579035

⋮

链接

此评论的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/349850-how-to-create-a-click-train-with#comment_579035

@Patricia: I've posted my comment as answer now. If it really helps you already, you can accept it. If you've found better details by your own, you can post them also and accept your own answer.

Stephen23 2020-3-26

此评论的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/349850-how-to-create-a-click-train-with#comment_815834

⋮

链接

此评论的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/349850-how-to-create-a-click-train-with#comment_815834

Original question from Google Cache:

"How to create a click-train with"

I need to create a click-train of 1s presented as 1 then two 1s then three 1s. The SOA is 75 ms. Each 1 is 100 microseconds and the interclick interval when there are two or three 1s is 4 ms. The SOA stays the same at 75 ms no matter if there is one,two, or three ones. It seems it should be quite easy.

请先登录，再进行评论。

请先登录，再回答此问题。