Uncorrelated sinuoids

11 次查看（过去 30 天）
zozo
zozo 2012-5-29
How can I create two uncorrelated sinusoidal signals of same frequency (say 900Hz)?
f1=900; %frequency in Hertz
t_duration=1;% duration of signal (seconds)
fs=10000; %FS sampling freq of the signal Hz
t = 0:1/fs:t_duration-1/fs;
s=10*sin(2*pi*f1*t); %source signal
j= 20*sin(2*pi*f1*t); %jammer signal
What changes should be made in above code to make 's' and 'j' uncorrelated?

请先登录，再回答此问题。

回答（2 个）

Walter Roberson
Walter Roberson 2012-5-29
You cannot. Two pure sine waves of the same frequency are always correlated. They differ in at most 1/2 a sample period or (phrasing another way) differ only in phase.
To get the signals uncorrelated, at least one needs to be modulated, or they need to be incommensurate frequencies (must be irrational relative to each other.)
  3 个评论
显示 1更早的评论
Geoff
Geoff 2012-5-29
Not really. 900 and 950 will create a complex waveform with a frequency of 50Hz. It really depends on what 'uncorrelated' means in the field you are applying this too (radio communications, presumably)
Walter Roberson
Walter Roberson 2012-5-30
A signal that was (900 + Pi) Hz would be uncorrelated to a signal that was at (900 + exp(1)) Hz, at least when measured over a sufficiently long time frame.

请先登录，再进行评论。

Geoff
Geoff 2012-5-29
By 'uncorrelated', you just mean out-of-phase, right? This is about as simple as wave generation gets.
Just work out how much of the wavelength to offset it by. Let's say you want a quarter wavelength:
lambda = 0.25;
phase = 2*pi*lambda / f1;
j = 20*sin(2*pi*f1*t + phase);

类别

在 Help Center 和 File Exchange 中查找有关 Discrete Fourier and Cosine Transforms 的更多信息

标签

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by