HDL optimized QPSK TX and RX combined

Question

Muhammad Rizwan 2020-11-17

0
链接

此问题的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/650628-hdl-optimized-qpsk-tx-and-rx-combined

回答： Kranti Balaga 2021-5-24

Hi,

I am trying to simulate example HDL optimized qpsk Tx and HDL QPSK optimized RX by interconnecting them as written in Rx webpage.

The problem I am facing is that I am not getting a nice time recovery contellation plot. I read a post online (https://itectec.com/matlab/matlab-correct-samples-for-hdl-optimized-qpsk-receiver-with-captured-data/) about it which suggested to add a delay element inbetween but for me it didnot worked.

I have attached my block diagram and screen shot for the said diagram.

matfile is attached incase if you need.

1 个评论
显示 -1更早的评论隐藏 -1更早的评论

Muhammad Rizwan 2020-11-17

I also observed low BER rates too though they are simply interconnected.

请先登录，再进行评论。

请先登录，再回答此问题。

Answer 1

Kranti Balaga 2021-5-24

0
链接

此回答的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/650628-hdl-optimized-qpsk-tx-and-rx-combined#answer_706973

Hi,

There are some limitations in the model due to receiver architecture. Here, Timing recovery would be self synchronizing and perform before the carrier synchronization that would have been improved the frequency offset estimation and link performance. We enhance this example in R21a and performance got improved and as expected. The following is the example link, you can take a look at

https://www.mathworks.com/help/comm/ug/hdlqpsktransmitterreceiver.html