Trenz Electronic TE0820 support in HDL coder toolbox

Question

Saulat Chughtai 2021-2-15

0
链接

此问题的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/745757-trenz-electronic-te0820-support-in-hdl-coder-toolbox

编辑： Stefanie Schwarz 2022-8-18

Hi,

I want to use Trenz Electronics TE0820, which uses Xilinx Zynq UltaScale+. I want to create the algorithm as Simulink models and execute these models in Simulink external mode for debuging and data gathering. Latter on it will be integrted into the system via any ethernet based protcols (ModBus, PROFINet or UDP/IP etc.). Since i am new in the tpoic of FPGA/Xilinx programming. I have some basic questions

Is it at all possible
Which toolboxes i would need
Does HDL coder supports the above HW?

0 个评论
显示 -2更早的评论隐藏 -2更早的评论

请先登录，再进行评论。

请先登录，再回答此问题。

Answer 1

Kiran Kintali 2021-2-16

0
链接

此回答的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/745757-trenz-electronic-te0820-support-in-hdl-coder-toolbox#answer_624352

编辑：Stefanie Schwarz 2022-8-18

>> I want to create the algorithm as Simulink models and execute these models in Simulink external mode for debuging and data gathering. Latter on it will be integrted into the system via any ethernet based protcols (ModBus, PROFINet or UDP/IP etc.).

Yes, HDL Coder has features to build such workflows. See Custom Board Reference Design documentation in HDL Coder to integrate HDL Coder generated code / ipcore into custom hardware boards.

https://www.mathworks.com/help/hdlcoder/ug/define-and-register-custom-board-and-reference-design-for-zynq-workflow.html