Embedded System

Question

Arun Sharma 2011-6-5

0
链接

此问题的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/8808-embedded-system

How can we use Simulink to design our embedded system.. Can we interface MATLAB and Simulink with our Micro-controller and control its operation.. Is it possible... and How???

I am using PIC16F877A micro-controller...

0 个评论
显示 -2更早的评论隐藏 -2更早的评论

请先登录，再进行评论。

请先登录，再回答此问题。

Answer 1

Walter Roberson 2011-6-5

0
链接

此回答的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/8808-embedded-system#answer_12157

Perhaps this previous posting will help: sim2lab

Also perhaps this MATLAB File Exchange Contribution: http://www.mathworks.com/matlabcentral/linkexchange/links/1303-embedded-target-for-dspic-a-matlab-toolbox-for-real-time-control-of-dspic-microcontrollers

And see this Mathworks page: http://www.mathworks.com/academia/microchip/

(Note: I do not myself know if there is a difference between the dsPIC33 and the PIC16*)

4 个评论
显示 2更早的评论隐藏 2更早的评论

Walter Roberson 2011-6-5

http://www.mathworks.com/matlabcentral/fileexchange/15955-read-lm73-temperature-sensor shows reading a temperature sensor using your chip.

And see these old practical notes:

http://www.mathworks.com/matlabcentral/newsreader/view_thread/45329

http://www.mathworks.com/matlabcentral/newsreader/view_thread/264868

Walter Roberson 2011-6-5

I'm think I might be missing something. The PIC16F877A only has 368 bytes of RAM. That would be very limited to use as a USB controller such as you mentioned in your previous post. Are you sure your USB controller is not communicating via serial emulation to the UART that is on-board the PIC16F877A ?

请先登录，再进行评论。