keep figures from popping up when running.

311 次查看（过去 30 天）
Michael Marcus
Michael Marcus 2011-6-15
回答： Victor v. Spaandonk 2021-8-5
I am doing a lot of batch processing in which I creating many figures. I would like to keep these figures in the background while running the Matlab code without the Figure window popping up each time a new figure is created. Is there an easy way to do this? When the figure pops up it disrupts anything else you are doing on the computer.
  4 个评论
显示 2更早的评论
Walter Roberson
Walter Roberson 2011-6-15
编辑：Walter Roberson 2019-8-20
I suggest you try export_fig
http://www.mathworks.com/matlabcentral/fileexchange/23629-exportfig
which can save a figure.
I have not experimented with it or looked at how it works, so I do not know if it would trigger a pop-up.
Jan
Jan 2011-6-15
@Michael: AFAICS the problem concerns Linux only. Therefore I asked which OS you are using.
Does PRINT move the figure to the front also?

请先登录，再进行评论。

请先登录，再回答此问题。

回答（9 个）

Walter Roberson
Walter Roberson 2011-6-15
Please see this discussion
Someone indicated, though, that they could not get the figures to be saved when they used this technique. Possibly Oliver's export_fig would work. Or running MATLAB without a display and using one of the print() options that are documented as not needing a display.
  4 个评论
显示 2更早的评论
Walter Roberson
Walter Roberson 2011-6-15
getframe() also pops the relevant figure to the front in this version.
Jan
Jan 2011-6-15
@Walter: Thanks, now I'm starting to understand the problem. Under Windows new figures are created on top of all other Matlab figures, but below the program which has the focus. And GETFRAME replies the contents of the screen at the figure (or axes) coordinates - if the figure is not topmost this is most likely not the wanted picture.

请先登录，再进行评论。

Gurudatha Pai
Gurudatha Pai 2011-6-15
I won't promise you that this is the best solution, however, is one of them.
You could set the 'visible' property off the figure object to 'off'. It can be done something like this,
h1 = figure();
set(h1, 'Visible', 'off');
plot(x,y)
and when you want it to be shown,
set(h1, 'Visible', 'off');
or
figure(h1)
should also work.
  4 个评论
显示 2更早的评论
Michael Marcus
Michael Marcus 2011-6-15
This does work on stopping the figure from popping up. Now I have another issue since I am using getframe(gcf) to save the image to a file and the getframe command still pops up an image window.
Watson Ly
Watson Ly 2019-8-20
figure_handle = figure(1)
figure_handle.WindowState = 'minimized'
.....
set(0, 'CurrentFigure', figure_handle)
plot([1:10],[1:10])
it worked for me

请先登录，再进行评论。

Jan
Jan 2011-6-15
As long as I do not use Java or Windows-API methods to set the topmost flag of the window, I do not get this behaviour.
pause(10);
figure;
% Enable the Explorer, NotePad, any other program
% After the 10 secs have passed, ...
% the figure is created - in the background!
Which OS are you using? Do you create figures with WindowStyle='modal'?
  3 个评论
显示 1更早的评论
Jan
Jan 2011-6-15
@Michael: I did not even try to show a solution. I still do not see the problem at all, because the figures are *not* created in the forground at all - are they? I simply cannot confirm this: "When the figure pops up it disrupts anything else you are doing on the computer".
Of course GETFRAME does not work with figures not shown in the foreground, but you do not mention any problems with bad output here, but that the figure pops to the foreground. But PRINT handles background, out of visible screen area and Visible=off figures also.
Can somebody enlighten me, please?
Michael Marcus
Michael Marcus 2011-6-16
getframe does work with figures that are not shown in the foreground and causes them to pop up into the foreground even if the figure visible is set to off as follows
h1 = figure();set(gcf,'Visible', 'off');

请先登录，再进行评论。

Fangjun Jiang
Fangjun Jiang 2011-6-15
I think you can do this. It will pop up only once. The point is to re-use the figure. You can delete all its contents once they are printed. You can step through it to see the effect.
h=figure;
set(h,'visible','off');
plot(1:10);
print(h);%use your own command, this sends it to the printer
delete(get(h,'children'));
subplot(2,1,1); %do this just for illustration
plot(1:10);
subplot(2,1,2);
plot(1:10);
set(h,'visible','on');
delete(get(h,'children'));
  2 个评论
Fangjun Jiang
Fangjun Jiang 2011-6-15
Or even better, use clf(h) instead of delete(). Thanks to Walter's comment.
Walter Roberson
Walter Roberson 2011-6-15
The delete() code shown here would not get hidden handles. Some figure children are created with hidden handles.

请先登录，再进行评论。

Michael Marcus
Michael Marcus 2011-6-16
I am still having the problem with getframe still cuasing a pop up window. However I have found a viable solution using the function export_fig instead provided by Oliver Woodford.
See http://sites.google.com/site/oliverwoodford/software/export_fig
Thanks to everyone for helping. This is the first time I used this resource.
Oliver Woodford
Oliver Woodford 2011-6-16
This question has been answered already elsewhere.
Fred Sigworth
Fred Sigworth 2018-1-5
I have this sort of problem too. I use Matlab on Mac OS. Suppose I have a program that draws in two figure windows which are overlapping. When I execute
figure(1); plot(some_data_vector); figure(2); plot(another_data_vector);
this puts figure 1 in front, draws on it, then puts figure 2 in front and draws on it. Is there any way I can update figure 2 without it becoming the front window?
I also run Matlab on a linux machine, and use XQuartz as the X-terminal. In that situation calling figure(1) puts that figure window in front of everything on the screen, which is more annoying still. Again, is there a way to draw in a figure (and have the graphics on the screen update) without the figure window being in front?
  6 个评论
显示 4更早的评论
Walter Roberson
Walter Roberson 2020-7-3
I specifically said above, "Yes: do not figure() it."
No calls to figure() inside your loop.
fig1 = figure(1);
ax1 = axes('Parent', fig1);
count=10;
Matrix1 = magic(100);
for i=1:count
mesh(ax1, Matrix1);
pause(1);
end
Stephan Moeller
Stephan Moeller 2020-7-5
ok. Sorry, missed that.
How would it work with a subplot ?
( fig1 = subplot(2,1,1);figure(1); )

请先登录，再进行评论。

Stephan Moeller
Stephan Moeller 2020-7-9
Got it :
count=5;
Matrix1 = magic(100);
Vector1=rand(10,1);
figure(4);
ax1= subplot(2,1,1);
ax2= subplot(2,1,2);
AX=[ax1,ax2];
for i=1:count
mesh(AX(1), Matrix1);
plot(AX(2), Vector1);
pause(0.5);
end
Victor v. Spaandonk
I feel like this didn't use to be the default behavior for me but now it is (figures popping up over other windows applications).
could it be a setting?
I'm at R2018b

类别

在 Help Center 和 File Exchange 中查找有关 Specifying Target for Graphics Output 的更多信息

标签

产品

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by