Feeds
提问
Freewheeling diode causing error in Full-Bridge Inverter model
Hi, please see the attached Simulink model. Its a simple full-bridge inverter producing quasi-square alternating voltage at the ...
8 years 前 | 1 个回答 | 0
1
个回答提问
How to dynamically change a block parameter value during simulation run-time?
I have been trying to find an easy way of doing this, but have failed till now. The problem is like this: I want to implement a ...
8 years 前 | 1 个回答 | 0
1
个回答提问
What Simulink tool should I use to break a continuous signal into its frequency components?
I have a continuous signal which is composed of multiple frequency components, not necessarily harmonics. How do I separate this...
8 years 前 | 1 个回答 | 0
1
个回答提问
'Degenerate Mass on Follower Side' issues?
[Please refer to the screenshots, as the portal does not allow attaching Simulink (.slx) models here] *** EDIT MADE TO QUESTION:...
9 years 前 | 0 个回答 | 0
0
个回答已回答
Can a joint produce 'Sensing' outputs resolved in the follower frame?
Got the answer after a bit of scouring the library, simply use a 'Transform Sensor' in parallel to the joint, and output whateve...
Can a joint produce 'Sensing' outputs resolved in the follower frame?
Got the answer after a bit of scouring the library, simply use a 'Transform Sensor' in parallel to the joint, and output whateve...
9 years 前 | 0
提问
Can a joint produce 'Sensing' outputs resolved in the follower frame?
Take for example the planar joint, can I get the position, velocity, acceleration of the follower frame resolved in the follower...
9 years 前 | 1 个回答 | 0
1
个回答提问
Pacejka Tire Model (Magic Formula) for lateral dynamics?
The Magic Formula block in Driveline is excellent, but only caters to the longitudinal forces/acceleration of the tire. I unders...
9 years 前 | 2 个回答 | 0
2
个回答提问
How do I set block parameter value using a Mask property?
I want to convert a Suspension block subset into a generic suspension Mask. This mask would have a few popups. A particular bloc...
9 years 前 | 1 个回答 | 0
