Star Strider
Hic sunt dracones! PROFESSIONAL: Physician (M.D.): Diplomate of the American Board of Internal Medicine; M.Sc. Biomedical Engineering: Instrumentation, Signal Processing, Control, System Identification, Parameter Estimation NON-PROFESSIONAL: Amateur Extra Class Amateur Radio Operator; Private Pilot, Airplane Single Engine Land, Instrument Rating Airplane; Gamer NOTE: I do not respond to emails or personal messages, unless they are about my File Exchange contributions. Time Zone: UTC-7 (Standard); UTC-6 (Daylight Savings/Summer)
Feeds
已回答
Graph with raw data points for four groups in three treatments
Your best option may be the swarmchart function. There are related versions (inicluding one in the Statistics and Machine Learn...
Graph with raw data points for four groups in three treatments
Your best option may be the swarmchart function. There are related versions (inicluding one in the Statistics and Machine Learn...
1 day 前 | 0
已回答
Unzip to a cell array, get the csv filles
I am not certain what your constraints are. This is how I usually do it: uz = unzip('YourZipFile.zip') for k = 1:numel(u...
Unzip to a cell array, get the csv filles
I am not certain what your constraints are. This is how I usually do it: uz = unzip('YourZipFile.zip') for k = 1:numel(u...
3 days 前 | 0
已回答
graphreader tool to extract values from graph images
There are some File Exchange conntributions that can do that. Two that appear to be well-regarded are Graph Digitizer and the...
graphreader tool to extract values from graph images
There are some File Exchange conntributions that can do that. Two that appear to be well-regarded are Graph Digitizer and the...
3 days 前 | 0
已回答
EEG sequencies visualization ideas
Based oin your description, my choice would be tiledlayout. It would be relatively straightforward to put each sequence in a ve...
EEG sequencies visualization ideas
Based oin your description, my choice would be tiledlayout. It would be relatively straightforward to put each sequence in a ve...
3 days 前 | 0
已回答
Curve Fitting Young's Modulus for Stress Strain Curve
I am not certain what you want to do. To fit the initial linear portion of the curve, you can either usee polyfit or mldivide, ...
Curve Fitting Young's Modulus for Stress Strain Curve
I am not certain what you want to do. To fit the initial linear portion of the curve, you can either usee polyfit or mldivide, ...
6 days 前 | 0
已回答
How to calculate the period of the 6th wave in my data when I dont have the equation of the wave
I’m not sure what the ‘6th wave’ is. The problem is that you need to give findpeaks a bit more information. Here, I added Mi...
How to calculate the period of the 6th wave in my data when I dont have the equation of the wave
I’m not sure what the ‘6th wave’ is. The problem is that you need to give findpeaks a bit more information. Here, I added Mi...
7 days 前 | 0
已回答
How can I use Interp1 here instead of ismembertol?
That might be possible. The interp1 function requires two vectors of equal size, and then returns the interpolated value of the...
How can I use Interp1 here instead of ismembertol?
That might be possible. The interp1 function requires two vectors of equal size, and then returns the interpolated value of the...
7 days 前 | 0
| 已接受
已回答
How can I change a variable and collect an vector of outputs?
One approach is to define a vector of ‘V’ values and then iterate. Try something like this — % process Parameters V = 10 %...
How can I change a variable and collect an vector of outputs?
One approach is to define a vector of ‘V’ values and then iterate. Try something like this — % process Parameters V = 10 %...
7 days 前 | 0
| 已接受
已回答
How to automate creating separate timetables?
Creating separate variables for each one is definitely not recommended. One option would be to create them as cell arrays, fo...
How to automate creating separate timetables?
Creating separate variables for each one is definitely not recommended. One option would be to create them as cell arrays, fo...
9 days 前 | 0
已回答
toolbox functions not working
Sometimes this can be due to path problems. Running these: restoredefaultpath rehash toolboxcache from a script or you...
toolbox functions not working
Sometimes this can be due to path problems. Running these: restoredefaultpath rehash toolboxcache from a script or you...
9 days 前 | 0
已回答
How to flip a scatter3 plot?
I am not quite certain what you want. Perhaps this — xyz = rand(50,3) figure scatter3(xyz(:,1),xyz(:,2),xyz(:,3),25,xyz...
How to flip a scatter3 plot?
I am not quite certain what you want. Perhaps this — xyz = rand(50,3) figure scatter3(xyz(:,1),xyz(:,2),xyz(:,3),25,xyz...
10 days 前 | 0
已回答
Getting error installing Matlab on Linux
See this recent search for potential solutions.
Getting error installing Matlab on Linux
See this recent search for potential solutions.
10 days 前 | 0
已回答
Fittg covid 19 SEIRD model
See: Parameter Estimation for a System of Differential Equations among other examples on how to do this.
Fittg covid 19 SEIRD model
See: Parameter Estimation for a System of Differential Equations among other examples on how to do this.
10 days 前 | 1
已回答
Why do I get conj(L)
The Symbolic Math Toolbox assumes all variables are complex, so it adds the conj to be complete. Specifying that the variables ...
Why do I get conj(L)
The Symbolic Math Toolbox assumes all variables are complex, so it adds the conj to be complete. Specifying that the variables ...
11 days 前 | 0
| 已接受
已回答
how to plot a certain level in a contour?
Extracting the contours for a specific level is straightforward. Try this — [x,y,c] = peaks(20); cilevels = [0.0,.005,0.01...
how to plot a certain level in a contour?
Extracting the contours for a specific level is straightforward. Try this — [x,y,c] = peaks(20); cilevels = [0.0,.005,0.01...
12 days 前 | 0
| 已接受
已回答
How do you return computational time and memory allocated during function call?
There are a few functions you can use for timing, one of which is the tic, toc pair. Most current recommendations are to use du...
How do you return computational time and memory allocated during function call?
There are a few functions you can use for timing, one of which is the tic, toc pair. Most current recommendations are to use du...
13 days 前 | 1
已回答
how to plot (0 1) matrix on figure
I am not certain what you intend by ‘dot plot’, however the spy function exists to do just that, if you only want to depict the ...
how to plot (0 1) matrix on figure
I am not certain what you intend by ‘dot plot’, however the spy function exists to do just that, if you only want to depict the ...
13 days 前 | 0
| 已接受
已回答
Programmatically find fzero of two RCL functions
It seems that the curves don’t intersect. The ‘funcVR’ function never crosses zero, although the ‘funcVL’ function does — f...
Programmatically find fzero of two RCL functions
It seems that the curves don’t intersect. The ‘funcVR’ function never crosses zero, although the ‘funcVL’ function does — f...
14 days 前 | 0
| 已接受
已回答
Finding x and y values of minimum z in 2-variable function.
Is there a particular reason to use that sort of iteration? MATLAB has a number of optimization funcitons you can use, with fmi...
Finding x and y values of minimum z in 2-variable function.
Is there a particular reason to use that sort of iteration? MATLAB has a number of optimization funcitons you can use, with fmi...
14 days 前 | 0
已回答
way to legend a data organized into colours in simple plot?
I am not certain what you want. One option — first_data = [[3 4 8 1];[3 6 4 9]]; % desired legend (first) & color (green) ...
way to legend a data organized into colours in simple plot?
I am not certain what you want. One option — first_data = [[3 4 8 1];[3 6 4 9]]; % desired legend (first) & color (green) ...
15 days 前 | 1
| 已接受
已回答
I'm trying to plot a graph with if than statements but keep getting the error "Array indices must be positive integers or logical values."
The definition of ‘positive integer’ are integers greater than zero. So use: for i=(1:n) instead of: for i=(0:n) There...
I'm trying to plot a graph with if than statements but keep getting the error "Array indices must be positive integers or logical values."
The definition of ‘positive integer’ are integers greater than zero. So use: for i=(1:n) instead of: for i=(0:n) There...
15 days 前 | 0
| 已接受
已回答
period segmentation of wrist pulse signal
See: Combining repetitive curves into one average curve for an example. This demonstrates how to segment them and also how to c...
period segmentation of wrist pulse signal
See: Combining repetitive curves into one average curve for an example. This demonstrates how to segment them and also how to c...
17 days 前 | 0
已回答
I am receiving an Error using plot
Use the matlabFunction function, evaluate it with ‘t’ and then plot — m1 = 49/1000; m2 = 31/1000; l1 = 0.5; l2 = 0.5; M = ...
I am receiving an Error using plot
Use the matlabFunction function, evaluate it with ‘t’ and then plot — m1 = 49/1000; m2 = 31/1000; l1 = 0.5; l2 = 0.5; M = ...
17 days 前 | 0
| 已接受
已回答
How to create a sound like this?
Firstt, look to see what their spectrograms reveal — uz = unzip('examples.zip') for k = 1:numel(uz) fn = strrep(string...
How to create a sound like this?
Firstt, look to see what their spectrograms reveal — uz = unzip('examples.zip') for k = 1:numel(uz) fn = strrep(string...
18 days 前 | 0
已回答
graph the function using ezplot() and plot()
Perhaps this — syms x y % 2y^2 = -3x^3+5x , -2.5≤x≤2.5. Eqn = 2*y^2 == -3*x^3+5*x % Add O...
graph the function using ezplot() and plot()
Perhaps this — syms x y % 2y^2 = -3x^3+5x , -2.5≤x≤2.5. Eqn = 2*y^2 == -3*x^3+5*x % Add O...
19 days 前 | 0
已回答
Using Fill between two curves semilog plot
If you are using flipud, you will need to vertically concatenate the vectors (that are presumably column vectors), so instead of...
Using Fill between two curves semilog plot
If you are using flipud, you will need to vertically concatenate the vectors (that are presumably column vectors), so instead of...
19 days 前 | 0
| 已接受
已回答
Filtering a Single Column of One Table Based on Multiple Criteria from Another Table.
I’m not sure that I fully understand your problem, however the join function (or one of its friends innerjoin or outerjoin) may ...
Filtering a Single Column of One Table Based on Multiple Criteria from Another Table.
I’m not sure that I fully understand your problem, however the join function (or one of its friends innerjoin or outerjoin) may ...
21 days 前 | 0
已回答
Too many input arguments
Plotting over ranges of ‘t’ and ‘u’ defines a surface, so create vectors for both of them, and use either ndgrid or meshgrid (th...
Too many input arguments
Plotting over ranges of ‘t’ and ‘u’ defines a surface, so create vectors for both of them, and use either ndgrid or meshgrid (th...
21 days 前 | 0
| 已接受
已回答
Edit window does not open in Ubuntu 24.04.2
There seem to be problems with the latest updates to 24.04 with respect to MATLAB. Yours is the third post I have seen on 24.04...
Edit window does not open in Ubuntu 24.04.2
There seem to be problems with the latest updates to 24.04 with respect to MATLAB. Yours is the third post I have seen on 24.04...
22 days 前 | 0
| 已接受
已回答
Suitable function(s) to be used for plotting the graph
Instead of using: plot(t,zz,'o-'), grid use: fplot(zz, [min(t) max(t)],'o-'), grid since ‘zz’ is a symbolic expression and...
Suitable function(s) to be used for plotting the graph
Instead of using: plot(t,zz,'o-'), grid use: fplot(zz, [min(t) max(t)],'o-'), grid since ‘zz’ is a symbolic expression and...
22 days 前 | 0
| 已接受
