特定于应用
您的 SDR 可以发射和接收符合各种标准的信号。使用 Communications Toolbox™ 生成和恢复各种空口波形。
主题
5G
- 5G NR Synchronization Signal Capture Using Software-Defined Radio (5G Toolbox)
Use a software-defined radio to capture an SS burst. Analyze the capture and identify the strongest SSB. (自 R2024a 起) - 5G NR Waveform Capture and Analysis Using Software-Defined Radio (5G Toolbox)
Generate and transmit a 5G NR waveform continuously over the air using a supported software-defined radio.
ADS-B 和 AIS
- Airplane Tracking Using ADS-B Signals
Track planes by processing automatic dependent surveillance-broadcast (ADS-B) signals, using either previously captured signals or real-time reception with an RTL-SDR, ADALM-PLUTO, or USRP™ radio, and visualize them on a map with the Mapping Toolbox™. - Airplane Tracking Using ADS-B Signals in Simulink
Track planes by processing automatic dependent surveillance-broadcast (ADS-B) signals, using either previously captured signals or real-time reception with an RTL-SDR, ADALM-PLUTO, or USRP radio, and visualize them on a map with the Mapping Toolbox. - Ship Tracking Using AIS Signals
Track ships by processing automatic identification system (AIS) signals, using either previously captured signals or real-time reception with an RTL-SDR, ADALM-PLUTO, or USRP radio, and display the tracked ships on a map with the Mapping Toolbox.
AMR
- Automatic Meter Reading
Read utility meters by processing standard consumption message (SCM) and interval data message (IDM) signals from encoder-receiver-transmitter (ERT) compatible meters with options for using recorded data or receiving signals in real time with an RTL-SDR or ADALM-PLUTO radio. - Automatic Meter Reading in Simulink
Read utility meters by processing standard consumption message (SCM) and interval data message (IDM) signals from encoder-receiver-transmitter (ERT) compatible meters with options for using recorded data or receiving signals in real time with an RTL-SDR or ADALM-PLUTO radio.
蓝牙
- Bluetooth BR/EDR Waveform Generation and Transmission Using SDR (Bluetooth Toolbox)
Generate and transmit Bluetooth BR/EDR waveform by using SDR. - Bluetooth BR/EDR Waveform Reception Using SDR (Bluetooth Toolbox)
Capture and decode Bluetooth BR/EDR waveform by using SDR. - Bluetooth LE Waveform Generation and Transmission Using SDR (Bluetooth Toolbox)
Generate and transmit Bluetooth LE waveform. - Bluetooth LE Waveform Reception Using SDR (Bluetooth Toolbox)
Demodulate and decode Bluetooth LE waveform.
FM
- FM Broadcast Receiver
Build an FM mono or stereo receiver using recorded data or real-time signals with an RTL-SDR, ADALM-PLUTO, or USRP radio. - FM Broadcast Receiver in Simulink
Build an FM mono or stereo receiver using recorded data or real-time signals with an RTL-SDR, ADALM-PLUTO, or USRP radio. - RDS/RBDS and RadioText Plus (RT+) FM Receiver
Extract program or song information from FM radio stations using RDS or RBDS, and optionally RT+, standards by processing previously captured signals or receiving over-the-air signals in real time with an RTL-SDR, ADALM-PLUTO, or USRP radio. - RDS/RBDS and RadioText Plus (RT+) FM Receiver in Simulink
Extract program or song information from FM radio stations using RDS or RBDS, and optionally RT+, standards by processing previously captured signals or receiving over-the-air signals in real time with an RTL-SDR, ADALM-PLUTO, or USRP radio.
LTE
- LTE Transmitter Using Software Defined Radio (LTE Toolbox)
This example shows how to generate a reference measurement channel (RMC) downlink (DL) LTE waveform suitable for over-the-air transmission. - LTE Receiver Using Software-Defined Radio (LTE Toolbox)
This example shows how to recover the master information block (MIB) and basic system information from an over-the-air LTE downlink (DL) waveform. - Image Transmission and Reception Using LTE Waveform and SDR (LTE Toolbox)
This example shows how to transmit and receive an image using an LTE waveform and a software-defined radio (SDR). - Spectrum Sensing with Deep Learning to Identify 5G, LTE, and WLAN Signals
Train a semantic segmentation network for spectrum monitoring to characterize spectrum occupancy and identify 5G NR and LTE signals in wideband spectrograms using deep learning. - Scan and Decode LTE Waveform (LTE Toolbox)
This example shows how to capture and decode an LTE signal obtained either from a file or from radio by using LTE Toolbox™ software and various hardware support packages (HSPs).
卫星通信
- DVB-S2 Transmitter Using Software-Defined Radio (Satellite Communications Toolbox)
Generate DVB-S2 PL frames and transmit them using SDR. - DVB-S2 Receiver Using Software-Defined Radio (Satellite Communications Toolbox)
Capture DVB-S2 waveform using SDR. - GPS Signal Transmission, Acquisition and Tracking Using PlutoSDR (Satellite Communications Toolbox)
Perform GPS signal acquisition and tracking using an ADAM-PLUTO SDR.
WLAN
- Image Transmission and Reception Using 802.11 Waveform and SDR (WLAN Toolbox)
Transmit and receive images encoded in IEEE® 802.11™ waveforms using SDR. - 802.11 OFDM Beacon Frame Generation (WLAN Toolbox)
Generate IEEE 802.11 packets containing MAC beacon frames. - WLAN Beacon Receiver Using Software-Defined Radio (WLAN Toolbox)
Retrieve information about WiFi networks on the 5 GHz band using a software-defined radio. - Recover and Analyze Packets in 802.11 Waveform (WLAN Toolbox)
Blindly detect, decode, and analyze IEEE 802.11 packets in a waveform. - Detect Human Presence Using Wireless Sensing with Deep Learning (WLAN Toolbox)
Perform wireless sensing to detect human presence using a CNN and the channel state information in wireless local area networks. - Test a Deep Neural Network with Captured Data to Detect WLAN Router Impersonation (WLAN Toolbox)
Train an RF fingerprinting CNN with data captured from an SDR to detect WLAN router impersonation.
精选示例
Capture RF Data to Baseband File Using ADALM-PLUTO Radio
Capture an FM broadcast signal using an ADALM-PLUTO radio, save the signal to a file as baseband samples, and demodulate the baseband samples.
Airplane Tracking Using ADS-B Signals
Track planes by processing automatic dependent surveillance-broadcast (ADS-B) signals, using either previously captured signals or real-time reception with an RTL-SDR, ADALM-PLUTO, or USRP radio, and visualize them on a map with the Mapping Toolbox.
Airplane Tracking Using ADS-B Signals in Simulink
Track planes by processing automatic dependent surveillance-broadcast (ADS-B) signals, using either previously captured signals or real-time reception with an RTL-SDR, ADALM-PLUTO, or USRP radio, and visualize them on a map with the Mapping Toolbox.
FM Broadcast Receiver
Build an FM mono or stereo receiver using recorded data or real-time signals with an RTL-SDR, ADALM-PLUTO, or USRP radio.
FM Broadcast Receiver in Simulink
Build an FM mono or stereo receiver using recorded data or real-time signals with an RTL-SDR, ADALM-PLUTO, or USRP radio.
RDS/RBDS and RadioText Plus (RT+) FM Receiver
Extract program or song information from FM radio stations using RDS or RBDS, and optionally RT+, standards by processing previously captured signals or receiving over-the-air signals in real time with an RTL-SDR, ADALM-PLUTO, or USRP radio.
RDS/RBDS and RadioText Plus (RT+) FM Receiver in Simulink
Extract program or song information from FM radio stations using RDS or RBDS, and optionally RT+, standards by processing previously captured signals or receiving over-the-air signals in real time with an RTL-SDR, ADALM-PLUTO, or USRP radio.
Automatic Meter Reading
Read utility meters by processing standard consumption message (SCM) and interval data message (IDM) signals from encoder-receiver-transmitter (ERT) compatible meters with options for using recorded data or receiving signals in real time with an RTL-SDR or ADALM-PLUTO radio.
Automatic Meter Reading in Simulink
Read utility meters by processing standard consumption message (SCM) and interval data message (IDM) signals from encoder-receiver-transmitter (ERT) compatible meters with options for using recorded data or receiving signals in real time with an RTL-SDR or ADALM-PLUTO radio.
Ship Tracking Using AIS Signals
Track ships by processing automatic identification system (AIS) signals, using either previously captured signals or real-time reception with an RTL-SDR, ADALM-PLUTO, or USRP radio, and display the tracked ships on a map with the Mapping Toolbox.
