Connectivity to TI mmWave Radar Sensor EVMs
Configuring and reading detections from TI AWR and IWR radar sensor EVMs
(Evaluation Modules)
Radar Toolbox Support Package for Texas Instruments® mmWave Radar Sensors enables you to communicate with TI’s AWR and IWR mmWave radar sensors, configure the radar, and acquire radar data.
Functions
mmWaveRadar | Connect to Texas Instruments mmWave radar sensors, and read object detections and other measurements (Since R2023b) |
mmWaveRadarSetup | Launch Hardware Setup screens for configuring Texas Instruments mmWave radar sensors (Since R2023b) |
flush | Flush the buffer created on the host computer to store Radar data for mmWaveRadar object (Since R2023b) |
release | Stop streaming radar data and release the mmWaveRadar object (Since R2023b) |
sendCommand | Send raw serial command to TI mmWave Radar (Since R2023b) |
info | Provides the information about the outputs the radar is configured to generate (Since R2023b) |
Topics
- Identifying Serial Ports for TI mmWave Radar Connection
Learn about identifying serial ports (COM ports) for connecting to TI mmWave EVM.
- Configure Radar Using a Configuration (.cfg) File for Reading Detections
Configure TI mmWave radar using a Configuration (.cfg) file for reading detections.
