HDL-Coder AXI-Vector Strobe Register validation model
显示 更早的评论
Hi,
setup:
- Simulink subsystem that is used with HDl-Coder
- One input port is a six value AXI-Vector
- Simulink includes a Strobe register
- Strobe register is used to make the AXI write synchronous
This is all fine and expected (and preferred!) behavior. However, this strobe register is not present in the validation model.
Is there any checkbox to generate the strobe register in the validation model? I'd like to have the validation model to resemble the model as close as possible and this is a potential pitfall, especially if the model is used for driver development & testing!
采纳的回答
JT Ferrara
2020-12-11
1 个投票
Hi Tobias,
The validation model generated by HDL Coder only compares the original DUT model against changes due to area and timing optimizations during code generation. It does not compare the original DUT against changes due to IP core interface generation.
When using the IP Core generation workflow, HDL Coder generates additional translation logic between the DUT boundary and the AXI interfaces. When using the AXI4 or AXI4-Lite interface you do not need model the entire protocol. Instead, you only need to model the data port for the interface. When you map a port to AXI4 or AXI4-Lite, HDL Coder generates an AXI accessible register and connects it to the port. This allows you to write/read data to/from the register and access FPGA logic.
The additional translation logic between the AXI interface and DUT boundary inserted by HDL Coder is not captured by the validation model. Therefore, the strobe register, other generated registers, and AXI protocol signals are not part of the validation model.
Unfortunately, we do not have a way at this time to add this additional logic to the validation model, but I have captured your request. You would have to add this additional logic in the validation yourself to have it be represented. An alternative verification method to consider is using UVM test bench generation from HDL Verifier. This lets you use the AXI-based protocols in your test bench. An example following that approach can be found here:
To learn more about the validation model, see this page:
~ JT
更多回答（1 个）
Kiran Kintali
2020-12-11
编辑：Kiran Kintali
2020-12-15
1 个投票
HDL Coder does not currently support adding additional logic to the validation model.
类别
在 帮助中心 和 File Exchange 中查找有关 Get Started with HDL Coder 的更多信息
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!
Translated by 
