May i know how to design the 3 phase converter for BLDC motor with Sinusoidal Commutation?

Question

sayantani 2013-3-29

0
链接

此问题的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/69114-may-i-know-how-to-design-the-3-phase-converter-for-bldc-motor-with-sinusoidal-commutation

评论： Patryk Zawierucha 2018-8-17

I have designed a BLDC motor model with Hall Sensors using simulink. It is working perfect with Trapezoidal commutation,with perfect trapezoidal back emf but when i go for sinusoidal commutation, the Hall sensors seem not to detect the electrical angle sequences. I want to know how to generate the three phase input voltages for driving the sinusoidally commutated bldc motor.Presently i am going with sensing the electrical angle using hall sensors and changing the hall state at every 60 degrees and switching the corresponding switches, but this somehow doesn't seem to work. I suppose i have to work on something like using a PWM signal or something. Please help me out.

3 个评论
显示 1更早的评论隐藏 1更早的评论

sayantani 2013-10-12

the mathematical equations of bldc motor were converted to simulink model

ABHIJITH SINGH S 2017-3-27

Can you please send me the simulink model of BLDC motor which you have simulated to the mail id - abhijithsinghs@gmail.com. It would be of great help. Thank you in advance.

请先登录，再进行评论。

请先登录，再回答此问题。

Answer 1

Anup Francy 2015-9-12

1
链接

此回答的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/69114-may-i-know-how-to-design-the-3-phase-converter-for-bldc-motor-with-sinusoidal-commutation#answer_192117

Can you upload the file?

0 个评论
显示 -2更早的评论隐藏 -2更早的评论

请先登录，再进行评论。

Answer 2

Manikandan 2013-10-3

0
链接

此回答的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/69114-may-i-know-how-to-design-the-3-phase-converter-for-bldc-motor-with-sinusoidal-commutation#answer_98574

when you go sinusoidal pwm its known as pmsm or pmac. it should be operated in 180 degree conduction mode.

2 个评论
显示无隐藏无

sayantani 2013-10-12

Since it has been 6 month that this question was asked, presently there has been lot more progress in this work. However thanks for your reply. Need to get a little doubt clear....

The present model senses rotor position through encoder,generates the 2 sinusoid 120 degree phase difference,given to pwm generator whose output drives the inverter bridge.

Now the problem is, at no load condition, when the model is run, the total current in the winding is not zero. This doesn't happen when the back emf is not subtracted from the input supply voltage. But as soon as i subtract the back emf, model gives erroneous output.

The input voltage is supplied as phase to phase voltage i.e. Vab Vbc and Vca

Patryk Zawierucha 2018-8-17

Hi. Can you help me with 3 phase converter for BLDC motor ???

请先登录，再进行评论。

Answer 3

ABHIJITH SINGH S 2017-3-27

0
链接

此回答的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/69114-may-i-know-how-to-design-the-3-phase-converter-for-bldc-motor-with-sinusoidal-commutation#answer_260495

Can you please send me the simulink model of BLDC motor which you have simulated to the mail id - abhijithsinghs@gmail.com. It would be of great help. Thank you in advance