Yiping Liu

MathWorks

Last seen: 2 years 前 | 自 2019 起处于活动状态

Followers: 0 Following: 0

统计数据

查看徽章

Feeds

已回答
PRM used A* ?
mobileRobotPRM in RST finds path using A* with Euclidean distance.

2 years 前 | 1

已回答
robot simulation collision detection
It looks like you still want a robot model but just want to stay away with the DH parameters. You can use rigidBodyTree without ...

2 years 前 | 1

已回答
Specify the RRT goalState as a matrix rather than a vector?
Hi, Chen, Thank you for your interest in this feature. It looks like that you are looking for the support of goal region in the...

2 years 前 | 0

已回答
Building a map from Lidar Data with SLAM
You can use the example linked below to see how get streamed lidar readings from Gazebo into MATLAB. https://www.mathworks.com/...

3 years 前 | 1

已回答
Velocity Product Torque Notation
Juraj, If you compare the EOM with the detailed Lagrange formulation, you will find both notations are correct. If you use the...

3 years 前 | 1

| 已接受

已回答
Is there a way to create a Dubins path given a set of waypoints?
Please check the example in the doc page below https://www.mathworks.com/help/uav/ref/uavdubinsconnection.html

3 years 前 | 0

已回答
Is there a bug in show function of Robotics System Toolbox of 2021a version?
So the plot from 20a (LEFT) is incorrect, and this bug has been fixed in 21a (the plot on the RIGHT shows the correct joint ax...

3 years 前 | 0

| 已接受

已回答
matrix determined by eul2rotm does not match a matrix calculated by euler angles using rotm2eul
When you feed in a rotation matrix to rotm2eul, if the matrix is not orthonormal, the rotm2eul will try to find the closest orth...

3 years 前 | 0

已回答
When I change joint type to fixed, it still appears in the robot configuration with NaN value. Why does it happens?
Hi Valerio, So this turns out to be a bug in the replaceJoint method (some internal numbers are not updated correctly when you ...

3 years 前 | 1

| 已接受

已回答
Measuring internal forces in a rigidBodyTree
By "internal force", I think you mean the constrained forces experienced by the joints. The recursive Newton-Euler algorithm doe...

3 years 前 | 1

已回答
How to set the center of mass of a prismatic joint?
The center of mass is a property on the rigidBody object and is not related to what type of joint this rigid body has.

3 years 前 | 0

| 已接受

已回答
Question regarding quaternion conventions; particularly with respect to point vs frame rotations
Your understanding seems to be correct. If the quaternion q reprsents a 3D rotation that rotates frame Local into frame Body, t...

3 years 前 | 0

已回答
inverseDynamics function in Robotics System Toolbox gives wrong results for joint torque calculations for external force applied on the end effector of the robot
Hi, Hakan, Thanks for raising the questions about the external forces in rigidBodyTree inverse dynamics. The quick answer is ...

3 years 前 | 1

已回答
Non-convex shape as a collisionBox for robot path planning
The CollisionMesh is designed to convert any unconvex mesh into its convex hull. The reason for that is the checkCollsion functi...

3 years 前 | 1

已回答
How to solve inverse kinematic problem in real-time?
In 21a, RST introduced a new IK solver called analyticalInverseKinematics which allows you generate a closed-form IK function fo...

3 years 前 | 1

| 已接受

已回答
How Does InverseDynamics Calculate Torques if Velocity is 0?
As described in the doc page, jointTorq = inverseDynamics(robot,configuration) computes joint torques to hold the specified r...

3 years 前 | 0

已回答
Using geometricJacobian and velocities
To your questions: NO. rigidBodyTree in Robotics System Toolbox is designed to be stateless. So there are no joint positions/ve...

3 years 前 | 0

| 已接受

已回答
Robotics toolbox - strange results when using inverse dynamics and robot created with DH
Hi, Francesco, I think this is related to an issue that is specific to robot specified through DH parameters. This issue has al...

3 years 前 | 2

已回答
How to obtain end effector orientation angles respect to the global reference/fixed reference axes X0, Y0 and Z0?
In general, the intrinsic rotations Z−Y′−X'' by angles γ, β, α are equivalent to the extrinsic rotations X−Y−Z by angles α, β,...

3 years 前 | 0

| 已接受

已回答
How to alter the roofed-section in MATLAB example (Track a Car-Like Robot using Particle Filter) for particle filter??
The roofed area is defined in ExampleHelperCarBot helper function.

3 years 前 | 0

| 已接受

已回答
how to create a robot from DH parameters
Ali, the getTransform method is working correctly. But from the way you set the DH parameters, I assume you expect "theta offset...

3 years 前 | 1

已回答
Change base body of rigid tree robot.
You can check out the solution provided in this post: https://www.mathworks.com/matlabcentral/answers/696625-change-base-of-rig...

3 years 前 | 0

已回答
Why the result of Robotic System Toolbox are different with RTB(Robotics Toolbox for MALTAB)?
Hi, Xiyong, Thanks for posting this question. What you described is indeed a bug in the internal code for computing dynamics qu...

3 years 前 | 0

| 已接受

已回答
Computing the Jacobian matrix of robot centroid.
Hi, Sheng, Thanks for posting this question. What you described is indeed a bug in the internal code for computing centroidal m...

3 years 前 | 0

| 已接受

已回答
How to use inverseKinematics to find configuration to 1) get robot link to pass through position X1 in space and also 2) have end effector position X2?
Sounds like you are trying to solve a multi-constraint IK problem. You should check out the generalizedInverseKinematics feature...

3 years 前 | 0

已回答
change base of rigidBodyTree like in SerialLink
Currently there is not a user-facing way to modify the fixed tranform on the robot base - it's always assumed to be at the origi...

3 years 前 | 1

| 已接受

已回答
Can I do a kinematics redundancy by using inverse kinematics?
You sould not use orientationTarget for link1. Try something like below (You only need pose and joint constraints) lbr = impor...

3 years 前 | 0

已回答
Simulation pick and place operation on 3 dof robotic arm in matlab environment.
Here are a variety of related examples you can refer to: Manipulator Motion Planning Manipulator Trajectory Generation and Fol...

3 years 前 | 0

已回答
output D-H parameters in Rigid body tree
If you import your rigidBodyTree from URDF, in general it cannot be converted to the standard DH representation without alternat...

3 years 前 | 0

已回答
Is it possible to call a rigidBodyTree robot model in a Matlab function in Simulink?
Lorenzo, the persistent variable is the correct way. You should also check out the rigid body tree algorithm Simulink blocks i...

3 years 前 | 0

| 已接受

加载更多