System Core

Configure and use system core peripherals such as GPIO, Hardware Interrupt, DMA, and more

Create Simulink^® models with the system core peripherals such as GPIO, Hardware Interrupt, DMA, and more available with STM32 processors. Configure the Simulink model to interface with supported target hardware using model configuration parameters.

Support for STM32 processor based board with Simulink uses STM32CubeMX graphical tool. STM32CubeMX tool is a graphical interface that you can use to configure peripherals of STM32 processors and generate peripheral initialization code for the STM32 processors that you select. You can configure the STM32 Processor-Based Boards to use the STM32CubeMX project with Simulink to generate code and deploy the code to the hardware.

Blocks

Digital Port Write	Set GPIO pin status (Since R2021b)
Digital Port Read	Read GPIO pin status (Since R2021b)
Hardware Interrupt	Trigger downstream function-call subsystems from interrupt service routine (Since R2021b)

Model Settings

Model Configuration Parameters for STM32 Processor Based Boards

Topics

Configure STM32 Processor-Based Boards using STM32CubeMX with Simulink
Configure the STM32 Processors-Based Boards to use STM32CubeMX project with Simulink.
Set Up Scheduling Options for STM32 Processor-Based Boards
Setting up scheduling options for STM32 processor based boards.
STM32CubeMX Configuration for Voltage Mode Control
Instructions for STM32CubeMX configuration.
Use SoC Blockset Pass-Through Block Simulation
Use the SoC Blockset™ block pass through to add simulation to STM blocks.

Featured Examples

Getting Started with STMicroelectronics STM32 Processor Based Boards

Use the Embedded Coder® Support Package for STMicroelectronics® STM32 Processors to run a Simulink® model on an STMicroelectronics STM32 Processor Based hardware board.

Open Model

Using Hardware Interrupt Block to Create an ISR on STMicroelectronics STM32 Processor Based Boards

Use a Hardware Interrupt block to create an interrupt service routine (ISR) in the generated code for Embedded Coder® Support Package for STMicroelectronics® STM32 Processors Based Boards.

Open Model

Optimizing FreeRTOS Scheduling on STM32 Processors

Demonstrates how to use the Embedded Coder® Support Package for STMicroelectronics® STM32 Processors to execute a Simulink® model on the STMicroelectronics NUCLEO-F207ZG board. It guides you through implementing FreeRTOS scheduling within the STM32CubeMX workflow, enabling efficient task management and code execution.

Open Live Script

MAT-file Logging on SD Card for STMicroelectronics STM32 Processors

Perform MAT-file logging using Simulink model on a Micro SD card mounted on an STMicroelectronics STM32 Discovery board.

Open Script

Getting Started with Hardware Profiling

Demonstrates how to perform real-time execution profiling of algorithms using the Embedded Coder® Support Package for STMicroelectronics® STM32 Processors. It covers two primary profiling methods:

Open Live Script